SP 40.13330.2012
СП 40.13330.2012
|
|
Concrete and reinforced concrete dams
Плотины бетонные и железобетонные
Status: Effective
The set of rules applies to the design of concrete and reinforced concrete dams under construction and reconstructed, which are part of the energy, water-transport and land-reclamation hydro-systems, water supply systems, water purification, drainage and flood control, as well as integrated waterworks.
Свод правил распространяется на проектирование строящихся и реконструируемых бетонных и железобетонных плотин, входящих в состав энергетических, воднотранспортных и мелиоративных гидроузлов, систем водоснабжения, водоочистки, переброски стока и борьбы с наводнениями, а также гидроузлов комплексного назначения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21118
The Product is Contained in the Following Classifiers:
Power industry »
21. Buildings. Facilities »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.3 Hydraulic structures of power facilities »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
National standards »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
As a Replacement Of:
SP 40.13330.2010: Concrete and reinforced concrete dams
The Document References:
Federal Law 117-FZ: Safety of Hydraulic Structures
Federal Law 184-FZ: About technical regulation
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 19185-73: Hydraulic engineering. Basic concepts. Terms and definitions
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST R 52231-2004: External noise of motor vehicles. Permissible levels and methods of measurement
SNiP 2.06.06-85: Concrete and reinforced concrete dams
SP 14.13330.2011: Construction in seismic regions.
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 14.13330.2018: Seismic building design code
SP 16.13330.2011: Steel structures
SP 16.13330.2017: Steel structures
SP 23.13330.2011: Foundation of hydraulic structures
SP 23.13330.2018: Foundations of hydraulic structures
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 28.13330.2017: Protection against corrosion of construction
SP 290.1325800.2016: Water passageways hydraulic structures (discharge sluices, emptying and dewatering conduits). Rules of projecting
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 358.1325800.2017: Hydraulic structures. Rules of design and construction in seismic-prone regions
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 39.13330.2012: Rock fill dams
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
The Document is Referenced By:
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55260.1.4-2012: Hydro power plants. Part 1-4. Hydraulic engineering constructions of hydroelectric power stations. The general requirements to the organization and realization of monitoring
GOST R 57793-2017: United power system and isolated power systems. Hydraulic and pumped storage power stations. Hydraulic engineering structures. Monitoring and assessment of technical condition during operation. Main provisions
GOST R 58719-2019: Unified energy system and isolated energy systems. Hydraulic power plants. Waterworks. Control and measuring systems and equipment. Terms of creation. Norms and requirements
GOST R 59873-2021: Hydro power stations. Methodology of determination of safety criteria for declared hydraulic structures
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction
Order 1042/pr: On approval of methodological recommendations for the development of norms and rules for the improvement of territories of municipalities
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
SP 100.13330.2016: The reclamation systems and construction
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 14.13330.2018: Seismic building design code
SP 24.13330.2011: Pile foundations
SP 290.1325800.2016: Water passageways hydraulic structures (discharge sluices, emptying and dewatering conduits). Rules of projecting
SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works
SP 358.1325800.2017: Hydraulic structures. Rules of design and construction in seismic-prone regions
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.