SP 41.13330.2012
СП 41.13330.2012
|
|
Concrete and reinforced concrete hydraulic structures
Бетонные и железобетонные конструкции гидротехнических сооружений.
Status: Effective
The set of rules applies to the design of newly constructed, reconstructed and repaired river and marine concrete and reinforced concrete hydraulic structures of all classes that are part of the energy and water transport hydraulic systems; structures for flood control and protection of the territory from flooding and flooding; and should also be used in the calculation of the state of the facilities in operation (including taking into account the field observations and surveys). In projects of structures intended for construction in seismic areas, in the northern construction-climatic zone, in areas of subsidence, swelling and soil that are weak in terms of physical and mechanical properties, additional requirements should be observed for such structures by the relevant regulatory documents.
Свод правил распространяется на проектирование вновь строящихся, реконструируемых и ремонтируемых речных и морских бетонных и железобетонных гидротехнических сооружений всех классов, входящих в состав энергетических и водно-транспортных гидроузлов; сооружений для борьбы с наводнениями и защиты территории от затопления и подтопления; а также должен использоваться при расчетной оценке состояния эксплуатируемых сооружений (в том числе с учетом данных натурных наблюдений и обследований). В проектах сооружений, предназначенных для строительства в сейсмических районах, в Северной строительно-климатической зоне, в районах распространения просадочных, набухающих и слабых по физико-механическим свойствам грунтов, должны соблюдаться дополнительные требования, предъявляемые к таким сооружениям соответствующими нормативными документами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21119
The Product is Contained in the Following Classifiers:
Power Industry »
21. Buildings. Facilities »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Assembly devices »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.2 Hydraulic structures for industries »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
National standards »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
As a Replacement Of:
SP 41.13330.2010: Concrete anl reinforced concrete hydtaulic structures
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
Order 635/13: On approval of the Code of Rules "SNiP 2.06.08-87 "Concrete and Reinforced Concrete Structures of Hydraulic Structures".
SNiP 2.06.08-87: Concrete and reinforced concrete structures of hydro engineering facilities
SP 131.13330.2012: Building climatology
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 28.13330.2017: Protection against corrosion of construction
SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
The Document is Referenced By:
GOST 20425-2016: Concrete Tetrapod for Costal Protecting Installations
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements
GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
GOST R 58411-2019: Flexible concrete slabs. Technical specifications
GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design
GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
GOST R 70831-2023: Oil and gas industry. Oil and gas field offshore stationary structures. Design and construction rules
GOST R 71119-2023: Oil and gas industry. Offshore oil and gas field structures. Stationary concrete structures. Basic requirements
MRR 3.2.55-13: The method of determining the cost of design work on the overhaul of reservoirs, carried out with the involvement of the budget of the city of Moscow
MRR 7.6-16: Reservoirs
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.101-2019: Guidelines for the design of plan elements, longitudinal and transverse profiles of roads
ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures
ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes
ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector
Order 1042/pr: On approval of methodological recommendations for the development of norms and rules for the improvement of territories of municipalities
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 635/13: On approval of the Code of Rules "SNiP 2.06.08-87 "Concrete and Reinforced Concrete Structures of Hydraulic Structures".
PNST 493-2020: Inland waterway transport. Infrastructure facilities. Embankments, thin-walled retaining walls (sheet piling). Features of the calculation and design of various structures
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
SP 100.13330.2016: The reclamation systems and construction
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 102.13330.2012: Hydraulic tunnels
SP 122.13330.2023: Railroad and road tunnels
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 14.13330.2018: Seismic building design code
SP 23.13330.2018: Foundations of hydraulic structures
SP 24.13330.2011: Pile foundations
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 277.1325800.2016: Costal protection constructions. Design rules
SP 28.13330.2017: Protection against corrosion of construction
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works
SP 358.1325800.2017: Hydraulic structures. Rules of design and construction in seismic-prone regions
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 389.1326000.2018: Technical operation of seaport infrastructure facilities
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 416.1325800.2018: Engineering protection of the shores of the tidal seas. Design rules
SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.