SP 46.13330.2012

СП 46.13330.2012

Bridges and pipes

Мосты и трубы

Status: Effective

The code of rules establishes the rules for the production and acceptance of works on the construction of new and reconstruction of permanent bridge structures and pipes: on motor roads, including on-farm roads of agricultural and industrial enterprises, on streets and roads of settlements; on the 1520 mm gauge railways when passenger trains move at speeds up to 200 km

Cвод правил устанавливает правила производства и приемки работ по сооружению новых и реконструкции постоянных мостовых сооружений и труб: на автомобильных дорогах, включая внутрихозяйственные дороги сельскохозяйственных и промышленных предприятий, на улицах и дорогах населенных пунктов; на железных дорогах колеи 1520 мм при движении пассажирских поездов со скоростями до 200 км/ч, линиях метрополитена и трамвая; на дорогах под совмещенное движение транспортных средств-автомобильных и поездов железных дорог, трамваев и Метрополитена; на пешеходных дорогах.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 149

Approved: Ministry of Regional Development of Russia, 12/29/2011

SKU: RUSS21123

Price: $625.65




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » K.32 Transport facilities »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.040 Construction of bridges »


The Document References:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10181-2014: Concrete mixtures. Methods of testing

GOST 10541-78: Automobile motor oils for carburetor engines

GOST 10587-84: Uncured epoxy resins. Specifications

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10908-75: Mechanical quadrants with level. Specifications

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 11371-78: Washers. Specifications

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 11964-81: Fraction pig-iron and steel technical

GOST 13078-81: Sodium glass liquid. Technical conditions

GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15589-70: Bolts with hexagon head, product grade C construction and dimensions

GOST 15613.3-77: Massive glued wood. Method for determination of ultimate strength in tension of glued butt joint

GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution

GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 18164-72: Drinking water. Method for determination of total solids content

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 201-76: Trisodium phosphate. Technical conditions

GOST 20850-2014: Wooden glued load bearing structures. General specifications

GOST 21554.2-81: Sawn timber and blanks. Method for determination of ultimate strength in static bending

GOST 21554.4-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in compression parallel to grain

GOST 21554.5-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain

GOST 21554.6-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in shearing parallel to grain

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 22266-2013: Sulphate-resistant cements. Specifications

GOST 22266-94: Sulphate-resistant cements. Specifications

GOST 2263-79: Sodium hydroxide for industrial use. Specifications

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 2292-88: Marking, grading, transportation, methods of measurement and acceptance rules

GOST 23118-2012: Building steel structures. General specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 23652-79: Transmission oils

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 24940-2016: Buildings and structures. Method for measuring the luminance

GOST 25346-2013: Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25607-2009: Crushed stone-sandy mixtures for road and airfield surfacing and bases. Specifications

GOST 263-75: Rubber. Method for the determination of Shore A hardness

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 28089-2012: Wall masonry constructions. Test methods for bond strength of facing tiles with the base

GOST 30515-97: Cements General specifications

GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness

GOST 310.4-81: Cements. Methods of tests of bending and compression strengths

GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications

GOST 31940-2012: Drinking water. Methods for determination of sulfate content

GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications

GOST 3808.1-80: Lumber from softwood

GOST 4.208-79: Quality rating system. Building. Timber glulam structures. Nomenclature of characteristics

GOST 4028-63: Building nails. Construction and dimensions

GOST 4245-72: Drinking water. Method for determination of chloride content

GOST 4543-71: Structural alloyed steel

GOST 5100-85: Soda ash technical. Technical conditions

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs

GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5802-86: Mortars. Test methods.

GOST 6402-70: Lock washers. Specifications

GOST 6564-84: Lumbers and blanks

GOST 6782.1-75: Sawn soft wood

GOST 6782.2-75: Lumber from hardwood

GOST 6824-96: Distilled glycerin

GOST 6958-78: Enlarged washers. Product grades A and C. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7016-2013: Products of wood and wood materials. Roughness parameters

GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness

GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8486-86: Coniferous sawn timber. Specifications

GOST 859-2001: Copper. Grades

GOST 859-2014: Copper. Grades

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 8735-88: Sand for construction work. Testing methods

GOST 8736-2014: Sand for construction works. Specifications

GOST 8736-93: Sand for construction works. Specifications

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating

GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.

GOST 9014.0-75: Round wood

GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST IEC 60598-2-22-2012: Luminaires. Part 2-22. Particular requirements. Luminaires for emergency lighting

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 51634-2000: Motor oils for autotractors. General technical requirements

GOST R 51866-2002: Automotive fuels. Unleaded petrol. Specifications

GOST R 52085-2003: Formworks. General specifications

GOST R 52086-2003: Formworks. Terms and definitions

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52964-2008: Drinking water. Methods for determination of sulphate content

GOST R 53231-2008: Concretes. Rules for control and assessment of strength

GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 54984-2012: Outdoor lighting of railway objects. Requirements and methods of control

GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

SNiP 12-03-2001: Labor safety in construction industry

SNiP 3.06.04-91: Bridges and pipes

SP 119.13330.2012: Railways of 1520 mm

SP 119.13330.2017: Railways with 1520 mm track

SP 126.13330.2012: Survey operations in construction

SP 126.13330.2017: Geodetic works in building

SP 22.13330.2016: Soil bases of buildings and structures

SP 24.13330.2011: Pile foundations

SP 45.13330.2012: Earth structures, bases and foundations

SP 45.13330.2017: Earthworks, grounds and footings

SP 48.13330.2011: Organization of construction

SP 52.13330.2016: Daylighting and artificial lighting

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 78.13330.2012: Automobile roads

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

SP 84.13330.2016: Tramways

SP 98.13330.2012: Tram and trolleybus lines

Federal Law 184-FZ: About technical regulation

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST R IEC 60598-1-2011: Luminaires. Part 1. General requirements and test methods

GOST R IEC 61347-2-3-2011: Lamp control gear. Part 2-3. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

The Document is Referenced By:

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures

ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads

ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways

ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials

ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses

ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities

ODM 218.4.031-2016: Recommendations on the organization and conduct of departmental control (monitoring) of quality during the performance of road works on federal public roads

PNST 328-2018: Roads are public. Geodetic networks for design and construction. Technical requirements

SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion

SP 24.13330.2011: Pile foundations

SP 243.1326000.2015: Design and construction of low-volume roads

SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods

SP 274.1325800.2016: Bridges. Monitoring of technical condition (Structural health monitoring)

SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction

SP 318.1325800.2017: Forest roads. Service regulation

SP 381.1325800.2018: Retaining structures. Design rules

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 78.13330.2012: Automobile roads

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

ODM 218.3.062-2019: The use of robotic telediagnostic systems for the inspection of culverts and drainage structures on roads

ODM 218.3.089-2019: Guidelines for the experimental use of prestressing reinforcement made of high-strength composite materials for reinforcing reinforced concrete bridge structures

Order 104/pr: On approval of Amendment No. 2 to SP 46.13330.2012 "SNiP 3.06.04-91 Bridges and pipes"

Order 99/pr: On the approval of the Plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes of practice for 2021.

OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications

Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"

SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules

SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone

SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules

SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules

SP 471.1325800.2019: Building Information Modeling. Quality control of construction works

SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!