SP 61.13330.2012
СП 61.13330.2012
|
|
Designing of thermal insulation of equipment and pipe lines
Тепловая изоляция оборудования и трубопроводов
Status: Effective
The set of rules should be observed when designing thermal insulation of the outer surface of equipment, pipelines, gas ducts and ducts located in buildings, structures and in the open air with a temperature of substances contained in them from minus 180 to 600 degrees Celsius, including pipelines of heat networks for all methods pads.
Свод правил следует соблюдать при проектировании тепловой изоляции наружной поверхности оборудования, трубопроводов, газоходов и воздуховодов, расположенных в зданиях, сооружениях и на открытом воздухе с температурой содержащихся в них веществ от минус 180 до 600 градусов Цельсия, в том числе трубопроводов тепловых сетей при всех способах прокладки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
12/27/2011
SKU: RUSS21132
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.13 Operation of power plants and heat networks »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.010 Energy and heat engineering in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.01 Engineering equipment of buildings in general »
As a Replacement Of:
SP 61.13330.2010: Designing of thermal insulation of equipment and pipe lines
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10296-79: Isol-hydroinsulating material. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10923-93: Ruberoid. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements
GOST 25100-2011: Soils. Classification
GOST 25100-95: Soils. Classification
GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness
GOST 25951-83: Thermoshrinking polyethylene film. Specifications
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
GOST 31309-2005: Building heat-insulating mineral fibers materials. General specifications
GOST 31913-2011: Thermal insulating materials and products. Terms and definitions
GOST 32025-2012: Thermal insulation. Method for determination of steady-state transmission properties of thermal insulation for circular pipes
GOST 4640-93: Mineral wool. Specifications
GOST 618-73: Aluminum foil for technical purposes. Specifications
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 9438-85: Polyvinylbutyral adhesive film. Specifications
GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
SP 124.13330.2012: Heating networks
SP 131.13330.2012: Building climatology
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
The Document is Referenced By:
GOST 34564-2019: The main pipeline transport of oil and oil products. Gear pumps. General specifications
GOST 34565-2019: The main pipeline transport of oil and oil products. Piston and plunger pumps. General specifications
GOST R 55892-2013: Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements
GOST R 56501-2015: Services of housing maintenance, public utilities and administration of apartment buildings. Services content in-house heating systems, heating and hot water supply of apartment houses. General requirements
GOST R 56730-2015: Plastic flexible pipes with thermal insulation for district heating. General specifications
GOST R 56779-2015: Systems of distribution of potable water hot-supply. Computational method of energy consumption and effectiveness
GOST R 57817-2017: Underground gas storage. Design standards
GOST R 58067-2018: Maintenance of ships under construction, refit and repair. Heating systems of ship’s compartments. Requirements
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications
GOST R 59307-2021: Oil and gas industry. Design and operation of subsea production systems. Part 16. Specifications for auxiliary equipment for flexible pipelines
GOST R 59509-2021: Internal engineering networks of buildings and structures. Heat-insulating works for internal pipelines of buildings and structures. Rules and control of work performance
GOST R 59721-2021: Main pipelines transport of petroleum and petroleum products. Manholes. General specifications
GOST R 70095-2022: Engineering networks of buildings and structures. Installation and commissioning of refrigeration systems. Rules and performance control
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70389-2022: Heat supply schemes of cities. Development and updating processes. Technical conditions for procurement
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards
GOST R 70831-2023: Oil and gas industry. Oil and gas field offshore stationary structures. Design and construction rules
GOST R 8.963-2019: State system for ensuring uniformity of measurements. Systems for measuring the amount of liquefied petroleum gases at automobile gas stations. Metrological and technical requirements
ODM 218.2.101-2019: Guidelines for the design of plan elements, longitudinal and transverse profiles of roads
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
RMD 23-27-2017 Sankt-Peterburg: Recommendations for normalizing the temperature and humidity conditions of unheated attic spaces
SP 124.13330.2012: Heating networks
SP 225.1326000.2014: Station buildings, structures and devices
SP 227.1326000.2014: Intersection of railway lines with transport lines and engineering networks
SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions
SP 265.1325800.2016: Manifold for engineering networks
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 280.1325800.2016: Systems of air supply for combustion and removal of combustion products for gas-fired heat generators. Design and development rules
SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device
SP 282.1325800.2016: Energy supply apartament of the buildings with the heat generation, working on gas fuel. Design rules and devices
SP 282.1325800.2023: Apartment heating systems based on individual gas heat generators. Design and construction rules
SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 303.1325800.2017: One-story industrial buildings. Operating rules
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 324.1325800.2017: Multi-storey industrial buildings. Operating rales
SP 336.1325800.2017: Ventilation and conditioning systems. Operating rules
SP 344.1325800.2017: The water supply and heating interior buildings systems cross-linked polyethylene pipes. The rules of design and installation
SP 346.1325800.2017: Systems of gas air treatments of boiler installations 150 Mw. Rules of design
SP 347.1325800.2017: Internal heating, hot and cold water systems. Rules of operation
SP 372.1325800.2018: Multicompartment residential buildings. Operation rules
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 374.1325800.2018: Buildings and premises for the storage and processing of agricultural products. Accidental actions
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 469.1325800.2019: The construction of livestock, poultry and animal husbandry enterprises. Terms of Use
SP 510.1325800.2022: Heating units and internal heating systems
SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules
SP 55.13330.2016: Detached houses
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 60.13330.2016: Heating, ventilation and air conditioning
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 71.13330.2017: Insulation and finish coatings
SP 74.13330.2023: Heat networks.
SP 86.13330.2014: Main (Trunk) pipelines
SP 89.13330.2012: Combustion boiler systems of heating generation
SP 89.13330.2016: Boiler installations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.