imgalt

SP 63.13330.2012

СП 63.13330.2012

Concrete and reinforced concrete structures. General provisions.

Бетонные и железобетонные конструкции. Основные положения

Status: Partially canceled. By Order of the Ministry of Construction of Russia No. 832

The set of rules applies to the design of concrete and reinforced concrete structures of buildings and structures for various purposes, operated in the climatic conditions of Russia (with a systematic exposure to temperatures not higher than 50 degrees Celsius and not less than minus 70 degrees Celsius), in an environment with non-aggressive impact. The set of rules establishes requirements for the design of concrete and reinforced concrete structures made from heavy, fine-grained, lightweight, cellular and stress concrete, and provides recommendations for the design and calculation of structures with composite polymer reinforcement.

Свод правил распространяется на проектирование бетонных и железобетонных конструкций зданий и сооружений различного назначения, эксплуатируемых в климатических условиях России (при систематическом воздействии температур не выше 50 градусов Цельсия и не ниже минус 70 градусов Цельсия), в среде с неагрессивной степенью воздействия. Свод правил устанавливает требования к проектированию бетонных и железобетонных конструкций, изготовляемых из тяжелого, мелкозернистого, легкого, ячеистого и напрягающего бетонов и содержит рекомендации по расчету и конструированию конструкций с композитной полимерной арматурой.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Regional Development of the Russian Federation, 12/29/2011

SKU: RUSS21134

Price: $745.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Mechanical Testing »

Welding regulations » Defects »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


The Document is Replaced With:

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

As a Replacement Of:

SP 63.13330.2010: Concrete and won concrete construction Design requirements

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10181-2014: Concrete mixtures. Methods of testing

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13087-81: Concretes. Method of abrasion test

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 17624-87: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 24211-91: Concrete additives. General technical requirements

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25192-2012: Concretes. Classification and general technical requirements

GOST 25192-82: Concretes. Classification and general technical requirements

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density

GOST 27005-86: Light-weight and cellular concretes. Rules of average density control

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 30515-97: Cements General specifications

GOST 31108-2016: General structural Portland clinker cements. Specifications

GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications

GOST 33530-2015: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 7566-94: Metal products

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 8736-2014: Sand for construction works. Specifications

GOST 8736-93: Sand for construction works. Specifications

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST R 52085-2003: Formworks. General specifications

GOST R 52086-2003: Formworks. Terms and definitions

GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications

GOST R 53231-2008: Concretes. Rules for control and assessment of strength

GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SP 122.13330.2012: Railway and highway tunnels

SP 131.13330.2012: Building climatology

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 16.13330.2011: Steel structures

SP 16.13330.2017: Steel structures

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 20.13330.2011: Loads and impacts

SP 20.13330.2016: Loads and actions

SP 22.13330.2011: Buildings and structures foundations

SP 22.13330.2016: Soil bases of buildings and structures

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 28.13330.2017: Protection against corrosion of construction

SP 48.13330.2011: Organization of construction

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 20910-2019: Concrete is heat-resistant. Technical specifications

GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications

GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25485-2019: Cellular concrete. General specifications

GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 33807-2016: Safety of attractions. General requirements

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 8717-2016: Concrete and reinforced concrete steps. Specification

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 52044-2003: Outer advertisement allocated alongside of highways and in territories of cities, towns and villages. General technical requirements concerning means of outer advertisement. Rules of allocation

GOST R 55198-2012: Civil defence. Constructive calculations of bearing elements defensive constructions of civil defence. General requirements

GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements

GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements

GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements

GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements

GOST R 55615.3-2013: Renewable power engineering. Tidal power plants. Part 3. Sea hydraulic structures. Requirements for loads and actions

GOST R 56297-2014: Reinforced concrete blast containment chambers for explosives facility sites. Technical requirements and strength assessment

GOST R 56298-2014: Reinforced concrete containment antechambers for explosives facility sites. Technical requirements and strength assessment

GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

GOST R 58430-2019: Mechanical and adhesive anchors for fastening in concrete in seismic areas. Test methods

GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design

GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design

Manual for SP 63.13330.2012: Manual for the calculation of concrete and reinforced concrete structures on a computer

MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps

Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities

Methodical manual: Hotel building design

Methodical manual: Classification methods of information modeling tasks

Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation

Methodical manual: Building Design for Refrigerators

Methodical recommendations 2-4-71-37-11: recommendations for the preparation of documentation for deregistration (type change) of civil defense protective structures

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways

ODM 218.2.038-2014: Guidelines for the overhaul and reconstruction of retaining walls and retaining structures

ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways

ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads

ODM 218.2.067-2016: Guidelines for the selection of rational structures of the roadbed on weak grounds and their feasibility study

ODM 218.2.069-2016: Recommendations for the design of approaches of the roadbed on a weak base to artificial structures

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads

ODM 218.3.030-2013: Method for calculating reinforced cement concrete pavements of roads and airfields on fortified bases

ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete

ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes

ODM 218.4.022-2015: Recommendations for conducting geotechnical monitoring of road tunnels under construction and operation

ODM 218.4.026-2016: Recommendations for determining the carrying capacity of operated bridges on public roads. Concrete and reinforced concrete structures

ODM 218.4.028-2016: Recommendations for determining the carrying capacity of existing bridges on public roads. Support parts, supports and foundations

ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector

ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg

RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I

R-NP SRO SSK 02-2015: Recommendations for concrete works in winter period

SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities

SP 102.13330.2012: Hydraulic tunnels

SP 107.13330.2012: Greenhouses and hotbeds

SP 108.13330.2012: Plants, buildings and constructions of storage and grain processing

SP 120.13330.2012: Subway systems

SP 121.13330.2012: Aerodromes

SP 122.13330.2012: Railway and highway tunnels

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 14.13330.2018: Seismic building design code

SP 15.13330.2012: Masonry and reinforced masonry structures

SP 159.1325800.2014: Steel and concrete composite bridge decks on highways. Rules of analysis

SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design

SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils

SP 22.13330.2016: Soil bases of buildings and structures

SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion

SP 24.13330.2011: Pile foundations

SP 248.1325800.2016: Underground structures. Design rules

SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 250.1325800.2016: Building and structures. Protection against groundwater

SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions

SP 26.13330.2012: Foundations for machines with dynamic loads

SP 265.1325800.2016: Manifold for engineering networks

SP 266.1325800.2016: Composite steel and concrete structures. Design rules

SP 267.1325800.2016: High rise buildings and complexes. Design rules

SP 268.1325800.2016: Transport structures in seismic zones. Specifications for earthquake-resistant design

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 28.13330.2017: Protection against corrosion of construction

SP 285.1325800.2016: Football stadiums. Desing rules

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules

SP 29.13330.2011: Floors

SP 291.1325800.2017: Armed grouted structures. Rules of architectural design

SP 294.1325800.2017: The construction of steel. Design rules

SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules

SP 297.1325800.2017: Fiber reinforced concrete structures and precast products with non-steel fibers. Design rules

SP 303.1325800.2017: One-story industrial buildings. Operating rules

SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules

SP 306.1325800.2017: Multifunctional shopping complex. Operating rules

SP 311.1325800.2017: High strength concrete and reinforced high strength concrete structures. Design guidline

SP 316.1325800.2017: Container terminals. Regulations of projecting

SP 319.1325800.2017: Buildings and premises of medikal institutions. The rules of operation

SP 324.1325800.2017: Multi-storey industrial buildings. Operating rales

SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling

SP 327.1325800.2017: Exterior masonry walls with brick veneer. Rules of design, operation and repair

SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire

SP 332.1325800.2017: Sport constructions. Rules of design

SP 335.1325800.2017: Large-panel construction system. Design rules

SP 337.1325800.2017: Composite precast and in-situ reinforced concrete construction. Design rules

SP 338.1325800.2018: High-speed railways noise protection. Design and construction regulations

SP 339.1325800.2017: Designs from cellular concrete. Rules of design

SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules

SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation

SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair

SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design

SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction

SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules

SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design

SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design

SP 360.1325800.2017: Steel fiber reinforced concrete structures. Design rules

SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects

SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules

SP 369.1325800.2017: Fixed offshore platforms. Design principles

SP 374.1325800.2018: Buildings and premises for the storage and processing of agricultural products. Accidental actions

SP 375.1325800.2017: Industrial chimneys. Design rules

SP 381.1325800.2018: Retaining structures. Design rules

SP 382.1325800.2017: Glued laminated wooden structures on glued rods. Calculation methods

SP 384.1325800.2018: Tent structures. Design rules

SP 385.1325800.2018: Protection of buildings and structures against progressive collapse. Design code. Basic statements

SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements

SP 389.1326000.2018: Technical operation of seaport infrastructure facilities

SP 40.13330.2012: Concrete and reinforced concrete dams

SP 405.1325800.2018: Concrete structures with non-metallic fiber and polymer reinforcement. Design rules

SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures

SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules

SP 413.1325800.2018: Buildings and structures subject to dynamic effects. Design rules

SP 414.1325800.2018: Fixed formwork. Design rules

SP 427.1325800.2018: Stone and armored constructions. Amplification methods

SP 43.13330.2012: Structures for industrial installations

SP 430.1325800.2018: Monolithic structural systems. Design rules

SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 436.1325800.2018: Engineering protection of territories, buildings and structures from landslides and landslides. Design rules

SP 45.13330.2017: Earthworks, grounds and footings

SP 46.13330.2012: Bridges and pipes

SP 54.13330.2016: Multicompartment residential buildings

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 64.13330.2011: Wooden structures.

SP 64.13330.2017: Timber structures

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

SP 69.13330.2016: Underground excavations

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 85.13330.2016: Overhead contact lines of electrified transport

SP 86.13330.2014: Main (Trunk) pipelines

SP 88.13330.2014: The protective shelters of civil defense

SP 91.13330.2012: Underground mine workings

SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants

SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete

SP 96.13330.2016: Ferrocement structures

SP 98.13330.2012: Tram and trolleybus lines

SP 98.13330.2018: Tram and trolley lines

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!