SP 66.13330.2011
СП 66.13330.2011
|
|
Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
Проектирование и строительство напорных сетей водоснабжения и водоотведения с применением высокопрочных труб из чугуна с шаровидным графитом
Status: Effective
The set of rules applies to pressure pipelines of cold water supply, drainage and land-improvement systems and establishes the rules for design and construction of: open piping; aboveground pipelines; pipelines laid by the trenchless method of horizontal directional drilling (HDD). The set of rules does not apply to the design and construction of hot water supply, as well as industrial sewage systems.
Свод правил распространяется на напорные трубопроводы холодного водоснабжения, водоотведения и мелиоративных систем и устанавливает правила проектирования и строительства: трубопроводов открытой прокладки; надземных трубопроводов; трубопроводов, прокладываемых бестраншейным способом горизонтально-направленного бурения (ГНБ). Свод правил не распространяется на проектирование и строительство горячего водоснабжения, а также систем промышленной канализации.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/28/2010
SKU: RUSS21135
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.4 Requirements for protection of surface water bodies in implementation of activities »
2.4.2 Protection of water bodies in design, construction, reconstruction and operation of water management system »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
National standards »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
As a Replacement Of:
SP 40-106-2002: Design and installation of underground water supply pipelines using pipes of ductile cast iron with nodular graphite
SP 40-109-2006: Code of practice for design and installation of water and sewer systems with pipes made of high-strength ductile iron and nodular graphite
The Document References:
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 23899-79: Column reinforced concrete for parabolic shoots. Specifications
GOST 23972-80: Foundations reinforced concrete for parabolic shoots. Specifications
GOST 25100-2011: Soils. Classification
GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches
GOST R ISO 2531-2008: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications
RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.
SNiP 12-01-2004: Organization of construction
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.01.07-85: Loads and impacts
SNiP 2.02.01-83: Footing of buildings and structures
SNiP 2.02.03-85: Pile foundations
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.04.02-84: Public water supply systems and structures
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 2.05.02-85: Automobile roads
SNiP 2.05.03-84: Bridges and Pipes. Construction Norms and Regulations.
SNiP 2.05.06-85: Main pipelines
SNiP 21-01-97: Fire safety of buildings and facilities
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.05.01-85: Indoor plumbing systems
SNiP 3.05.03-85: Heat networks
SNiP 3.05.04-85: Water-supply and sewerage outdoor networks and structures
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 11-105-97: Engineering and geological survey for construction
SP 20.13330.2011: Loads and impacts
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2011: Buildings and structures foundations
SP 24.13330.2011: Pile foundations
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 33.13330.2012: Steel pipelines strength analysis
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 36.13330.2012: Trunk pipelines
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 40-106-2002: Design and installation of underground water supply pipelines using pipes of ductile cast iron with nodular graphite
SP 40-109-2006: Code of practice for design and installation of water and sewer systems with pipes made of high-strength ductile iron and nodular graphite
SP 45.13330.2012: Earth structures, bases and foundations
SP 48.13330.2011: Organization of construction
SP 52-101-2003: Concrete and reinforced concrete structures without prestressing
SP 52-102-2004: Pre-stressed concrete structures
SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment
The Document is Referenced By:
GOST 20054-2016: Concrete non-pressure pipes. Specifications
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST R 21.623-2023: System of design documentation for construction. Rules of design documentation of linear objects. Water supply and water disposal
GOST R 70524-2022: Land reclamation systems and structures. Rules of acceptance into operation
GOST R 70825-2023: External engineering networks. Installation of underground water pipelines and pressure sewerage pipelines made of high-strength cast iron with spheroidal graphite. Rules and control of work performance
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
SP 120.13330.2012: Subway systems
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 32.13330.2018: Sewerage. Outdoor networks and facilities
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 421.1325800.2018: Reclamation systems and facilities. Terms of Use
SP 81.13330.2017: The reclamation systems and construction
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
