SP 78.13330.2012
СП 78.13330.2012
|
|
Automobile roads
Автомобильные дороги
Status: Effective
The set of rules establishes rules for the production and quality control of works and extends to newly constructed, reconstructed and thoroughly repaired public roads and departmental roads. The requirements of this set of rules do not apply to temporary roads, test roads of industrial enterprises and automobile roads.
Свод правил устанавливает правила производства и контроля качества работ и распространяется на вновь строящиеся, реконструируемые и капитально ремонтируемые автомобильные дороги общего пользования и ведомственные автомобильные дороги. Требования настоящего свода правил не распространяются на временные дороги, испытательные дороги промышленных предприятий и автозимники.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
6/30/2012
SKU: RUSS21137
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.32 Transport facilities »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.01 Road construction in general »
As a Replacement Of:
SP 78.13330.2011: Automobile roads
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
Federal Law 184-FZ: About technical regulation
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18105-86: Concretes. Rules for the strength control
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 23467-79: Air compressors for blast furnaces and air separation plants. General technical requirements
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 25100-2011: Soils. Classification
GOST 25100-95: Soils. Classification
GOST 25458-82: Wooden (timber) posts for road signs. Specifications
GOST 25459-82: Reinforced concrete posts for road signs. Specifications
GOST 25584-90: Soils. Laboratory methods for determination of filtration factor
GOST 25607-2009: Crushed stone-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30412-96: Road roads and airfields. Methods for measuring base irregularities and coatings
GOST 30413-96: Automobile roads. Method for determining the coefficient of adhesion between vehicle wheel and road pavement
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 30740-2000: Sealing materials used in joints of aerodrome coats. General specifications
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 33101-2014: Automobile roads of general use. Road coating. Measuring flatness
GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics
GOST 5180-84: Soils. Laboratory methods for determination
GOST 7473-2010: Fresh concrete. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 7802-81: Increased cup head square shoulder bolts, product grade C. Construction and dimensions
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-2014: Sand for construction works. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST R 51256-2011: Traffic control devices. Road marking. Classification. Technical requirements
GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
GOST R 52128-2003: Bitumen road emulsions. Specifications
GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications
GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators
GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements
GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements
GOST R 55028-2012: Public roads and highways. Geosynthetic for road construction. Classification, terms and definitions
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 55420-2013: General use highways. Cationic road bitumen emulsions. Specifications
Order 762/pr: On approval of Amendments N 2 to SP 78.13330.2012 "SNiP 3.06.03-85 Highways
SNiP 3.06.03-85: Automobile roads
SP 126.13330.2011: Geodetic works in building
SP 126.13330.2012: Survey operations in construction
SP 130.13330.2011: Production of precast reinforced concrete structures and products
SP 34.13330.2010: Automobile roads
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 45.13330.2012: Earth structures, bases and foundations
SP 46.13330.2012: Bridges and pipes
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 48.13330.2011: Organization of construction
SP 70.13330.2011: Bearing and enclosing structures
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
GOST 11030-2017: Motor graders. General specifications
GOST R 52059-2018: Household services. Services in repair and construction of housing and other constructions. General specifications
GOST R 56925-2016: Automobile roads and airfields. Uneveness measurement methods for base courses and pavements
GOST R 59172-2020: Automobile roads for general use. Lightweight and combined embankments of foamed polystyrene blocks (PPS blocks). Design and application rules
GOST R 59432-2021: Automobile roads for general use. Accessibility for people with disabilities and other people with limited mobility. General requirements
GOST R 59698-2021: Public roads. Blocks of polystyrene foam extruded products (XPS-blocks). Rules of application
GOST R 59980-2022: Public roads. Ice-preventive structures. General requirements
GOST R 59982-2022: Public roads. Operation. Rules for assessment and acceptance
GOST R 70690-2023: Public roads. Laser scanning. Requirements for laser scanning data at different stages of the life cycle of a highway
GOST R 71244-2024: Roads with low traffic intensity. Road pavement. Design and calculation
Letter 84-AS/16: About the typo in SP 78.13330.2012
Letter D2-365-PG: On the use of normative documents instead of departmental building norms VSN 7-89 "Guidelines for the construction, repair and maintenance of gravel pavement
MRR 4.3-16: City highways, transportation hubs, transport tunnels
ODM 218.11.001-2015: Methodical recommendations about the accounting of increase in dynamic influence of loading in process of accumulation of roughnesses and to determination of coefficient of dynamism depending on a flatness indicator
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.022-2012: Guidelines for the reuse of asphalt concrete in the construction (reconstruction) of roads
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.027-2012: Guidelines for the calculation and design of reinforced ground retaining walls on highways
ODM 218.2.034-2013: Guidelines for the preparation and use of asphalt mix using recycled asphalt
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.2.054-2015: Recommendations for the use of textile-sand piles in the construction of roads on weak grounds
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
ODM 218.2.067-2016: Guidelines for the selection of rational structures of the roadbed on weak grounds and their feasibility study
ODM 218.2.068-2016: Recommendations on accounting for dynamic effects from modern vehicles when calculating the strength, stability and deformability of the road bed
ODM 218.2.069-2016: Recommendations for the design of approaches of the roadbed on a weak base to artificial structures
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.2.096-2018: Guidelines for taking into account the influence of traffic flow parameters on the pace of damage to pavements (based on monitoring of the Caspian M-6 Federal Highway
ODM 218.2.097-2019: Recommendations on the use of geo-environmental protection technologies in the design, construction and operation of roads
ODM 218.3.036-2013: Recommendations for the technology of rehabilitation of cracks and seams in existing road surfaces
ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample
ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete
ODM 218.3.041-2014: Guidelines for the reinforcement of asphalt concrete pavement layers with steel nets
ODM 218.3.041-2020: Methodological recommendations for reinforcing asphalt concrete layers of road pavements with steel meshes
ODM 218.3.043-2015: Guidelines for the use of natural belite sludge in the pavement layers
ODM 218.3.049-2015: Guidelines for the use of multi-layer composite drainage materials (geodren) to drain and strengthen road structures in the construction and reconstruction of roads
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.059-2015: Guidelines for the use of electromagnetic devices for the operational control of the quality of soil compaction
ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads
ODM 218.3.073-2016: Recommendations for the use of impregnating compositions to improve the durability of asphalt concrete pavements
ODM 218.3.075-2016: Recommendations for quality control of road construction using GPR
ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete
ODM 218.3.084-2020: Recommendations for the preparation and use of organic-mineral mixtures in the construction of structural layers of road pavements of capital and lightweight types
ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District
ODM 218.3.090-2017: Guidelines for assessing the economic efficiency, technology and quality of work when maintaining public roads with asphalt concrete pavement under compacted snow cover, taking into account operating conditions
ODM 218.3.092-2017: Guidelines for the measurement and prediction of temperature changes over time and depth of the pavement, taking into account its design features
ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions
ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils
ODM 218.4.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.4.023-2015: Guidelines for assessing the effectiveness of the construction, reconstruction, overhaul and repair of roads
ODM 218.4.024-2016: Methods for estimating the timing of road construction work under the influence of destabilizing factors
ODM 218.4.030-2016: Guidelines for assessing the capacity of ice crossings
ODM 218.4.031-2016: Recommendations on the organization and conduct of departmental control (monitoring) of quality during the performance of road works on federal public roads
ODM 218.4.033-2017: Guidelines for the creation of a system of pilot landfills on the existing network of federal roads for the introduction of new technologies and materials in the road sector in various climatic zones of the Russian Federation
ODM 218.4.039-2018: Recommendations for the diagnosis and assessment of the technical condition of roads
ODM 218.6.021-2019: Guidelines for the use of clean low-temperature deicing materials for winter road maintenance
ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures
ODM 218.8.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.9.079-2016: Recommendations about design macrorough pavings
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
Order 762/pr: On approval of Amendments N 2 to SP 78.13330.2012 "SNiP 3.06.03-85 Highways
PNST 657-2022: Oil and gas industry. Surveying support of prospecting, exploration, construction and development of hydrocarbon fields
PNST 856-2023: Designing the laying of line and cable structures of transportation multichannel communication. General requirements
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
SP 122.13330.2023: Railroad and road tunnels
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 243.1326000.2015: Design and construction of low-volume roads
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 312.1325800.2017: Internal roads of rural settlements. Service regulation
SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction
SP 318.1325800.2017: Forest roads. Service regulation
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 348.1325800.2017: Industrial parks and industrial clusters. Design rules
SP 37.13330.2012: Industrial transport
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 407.1325800.2018: Excavation. Rules for the performance of work by hydromechanization
SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone
SP 445.1325800.2023: Culverts and drainage systems in permafrost areas. Design rules
SP 450.1325800.2019: Agro-industrial clusters. Design rules
SP 46.13330.2012: Bridges and pipes
SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 71.13330.2017: Insulation and finish coatings
SP 81.13330.2017: The reclamation systems and construction
SP 82.13330.2016: Territory improvement
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.