SP 89.13330.2012
СП 89.13330.2012
|
|
Combustion boiler systems of heating generation
Котельные установки
Status: Superseded in part. Not applicable by order of the Ministry of Construction of Russia No. 944
The rules should be observed in the design, construction, reconstruction, major repairs, expansion and technical re-equipment of boilers operating on any type of fuel, with a total installed heat capacity of 360 kW and more with steam, hot water and steam water heating boilers, with a steam pressure not exceeding 3 9 MPa (40 kgf
Cвод правил след��ет соблюдать при проектировании, строительстве, реконструкции, капитальном ремонте, расширении и техническом перевооружении котельных, работающих на любом виде топлива, с общей установленной тепловой мощностью 360 кВт и более с паровыми, водогрейными и пароводогрейными котлами, с давлением пара не более 3,9 МПа (40 кгс/см2) включительно и с температурой воды не более 200 градусов Цельсия, включая установки для комбинированной выработки электроэнергии для собственных нужд.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
6/30/2012
SKU: RUSS21140
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding materials »
Gases »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.7 For construction and housing and communal services »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.2 For thermal power »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.13 Operation of power plants and heat networks »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.01 Engineering equipment of buildings in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.01 Engineering equipment of buildings in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.30 Ventilation and air conditioning systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.30 Ventilation and air conditioning systems »
The Document is Replaced With:
SP 89.13330.2016: Boiler installations
As a Replacement Of:
SP 89.13330.2011: COMBUSTION BOILER SYSTEMS OF HEATING GENERATION
The Document References:
Code 136-FZ: Land Code of the Russian Federation
Code 190-FZ: Town Planning Code of the Russian Federation
Code 74-FZ: Water Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
Federal Law 190-FZ: About heat supply
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
Federal Law 7-FZ: Environmental Protection
GOST 12.2.022-80: Conveyers.
GOST 16860-88: Thermal deaerators. Types, basic parameters, acceptance, control methods
GOST 19.101-77: Unified system for program documentation. Types of programs and program documents
GOST 20995-75: Stationary steam generators with pressure to 3,9 MPa. Quality indices of water and steam feeding the generator
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 23838-89: Buildings of enterprises. Parameters
GOST 2761-84: Sources of centralized utility and drinking water supply Sanitary and technical requirements and selection rules
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
NTPD-90: Norms of technological design of diesel power plants
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
PB 03-445-02: Safety Rules for the operation of smoke and ventilation of industrial pipes
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
REGA RF-94: Operation manual for civil airfields of the Russian Federation
Resolution 74: On approval of SanPiN 2.1.4.2652-10
Resolution 83: Rules for determining and providing technical conditions for connection of capital construction objects to engineering support networks
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
SanPiN 2.1.4.2496-09: Hygienic requirements for safety ensuring of hot water supply systems
SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas
SanPiN 2.2.1/2.1.1.1031-01: Project work, construction, reconstruction and operation of enterprises, planning and development of inhabited areas. Sanitary protection zones and sanitary classification of enterprises, installations and other sites
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SanPiN 4630-88: Sanitary rules and standards for preservation of surface waters against pollution
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
SNiP 32-01-95: Railroads with 1520-mm Track. Construction Norms and Regulations
SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications
SP 10.13130.2009: Systems of fire protection. Fire line inside. Fire safety requirements
SP 110.13330.2012: Warehouses for oil and oil products. Fire regulations
SP 119.13330.2012: Railways of 1520 mm
SP 12.13130.2009: Determination of categories of rooms, buildings and external installations for explosion and fire hazards
SP 131.13330.2012: Building climatology
SP 18.13330.2011: Master plans for industrial enterprises
SP 3.13130.2009: Systems of fire protection. System of annunciation and management of human evacuation at fire. Requirements of fire safety
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 33.13330.2012: Steel pipelines strength analysis
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 37.13330.2012: Industrial transport
SP 4.13130.2009: Fire containment at protected facilities. Requirements to spatial planning and structural solutions
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 43.13330.2012: Structures for industrial installations
SP 44.13330.2011: Administrative and residential buildings
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 51.13330.2011: Noise protection and rooms acoustics.
SP 52.13330.2011: Natural and artificial lighting
SP 56.13330.2011: Industrial buildings
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines
SP 62.13330.2011: Gas distribution systems
SP 8.13130.2009: Systems of fire protection. Sources of external fire protection. Water supply. Fire safety requirements
SP 9.13130.2009: Fire Engineering. Fire extinguishers. Requirements to Operation
SP 90.13330.2012: Thermal power stations
VNTP 81: Engineering Design Standards for Thermal Power Plants (VSN 29-81)
The Document is Referenced By:
GOST R 56352-2015: Petroleum and natural gas industries. Production, storage and handling of liquefied natural gas. General safety requirements
ODM 218.2.101-2019: Guidelines for the design of plan elements, longitudinal and transverse profiles of roads
SP 152.13330.2012: Buildings of common jurisdiction courts. Rules of architectural design
SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules
SP 225.1326000.2014: Station buildings, structures and devices
SP 285.1325800.2016: Football stadiums. Desing rules
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 383.1325800.2018: Facilities for sports and health. Desing rules
SP 89.13330.2016: Boiler installations
SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
