GOST 22703-2012
ГОСТ 22703-2012
|
|
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Детали литые сцепных и автосцепных устройств железнодорожного подвижного состава. Общие технические условия.
Status: Effective - Supersedes. (IUS 4-2013)
This standard applies to cast parts of coupling and automatic coupling devices of railway rolling stock intended for use on 1520 mm gauge railways. This standard does not apply to parts: - automatic coupling devices of cars of industrial vehicles, if the latter do not have the right to operate on public roads; - absorbing devices for coupling and automatic coupling devices of railway rolling stock of all types
Настоящий стандарт распространяется на литые детали сцепных и автосцепных устройств железнодорожного подвижного состава, предназначенного для эксплуатации на железных дорогах колеи 1520 мм. Настоящий стандарт не распространяется на детали: - автосцепных устройств вагонов промышленного транспорта, если последние не имеют права эксплуатации на путях общего пользования; - поглощающих аппаратов сцепных и автосцепных устройств железнодорожного подвижного состава всех типов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/11/2012
SKU: RUSS21186
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
As a Replacement Of:
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 1497-84: Metals. Methods of tension test
GOST 15.902-2014: System of development and launching into manufacture. Railway rolling stock. Procedure of development and launching into manufacture
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 2.106-96: Unified system for design documentation. Text documents
GOST 21447-75: Coupler contour line. Dimensions
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 32894-2014: Railway application. Inspection control. General provisions
GOST 33434-2015: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 977-88: Steel castings. General specifications
GOST R 2.106-2019: Unified system of design documentation. Text documents
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods
The Document is Referenced By:
GOST 10674-2022: Tank wagons. General specifications
GOST 10935-2019: Cargo freight cars. General specifications
GOST 10935-2022: Covered freight cars. General specifications
GOST 26686-2022: Flatcars. General specifications
GOST 26725-2022: Open wagons. General technical conditions
GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions
GOST 33434-2015: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules
GOST 33796-2016: Railway multiple units. Durability and dynamics requirements
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods
GOST 34710-2021: Stops for automatic couplers of freight and passenger cars. General specifications
GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities
GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications
GOST 5973-2022: Dumper cars. General specifications
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods
GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements
GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties
GOST R 70463-2022: Four- and six-axle flatcars. General specifications
PNST 364-2019: Automatic coupling device with automatic coupling sa-3t of freight cars of railways of 1520 mm gauge. Technical conditions
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
ST RK 2431-2013: Multiple unit passenger trains composed of locomotive-hauled cars with systems of pneumatic suspension and body tilt. General specification
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
