GOST 2479-79
ГОСТ 2479-79
|
|
Rotating electrical machines. Symbols for types of construction and mounting arrangements.
Машины электрические вращающиеся. Условные обозначения конструктивных исполнений по способу монтажа.
Status: Effective - Supersedes. The limitation of effectiveness period has been lifted: Protocol No. 7 of the CIS MGS dated 01.03.95
The standard applies to electric machines of general and special purpose and establishes the symbols of their designs according to the method of installation (fastening and articulation) used in standards, catalogs and other technical documentation. The standard applies to electrical machines, the technical specifications for the development of which are approved before 01.01.2005. The standard does not apply to automotive electric machines.
Стандарт распространяется на электрические машины общего и специального назначения и устанавливает условные обозначения их конструктивных исполнений по способу монтажа (крепления и сочленения), применяемые в стандартах, каталогах и другой технической документации. Стандарт распространяется на электрические машины, технические задания на разработку которых утверждены до 01.01.2005. Стандарт не распространяется на автотракторные электрические машины.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/25/1979
SKU: RUSS21190
The Product is Contained in the Following Classifiers:
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.20 Graphic designations for special equipment »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.20 Graphic designations for special equipment »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.40 Graphic symbols for technical drawings, diagrams, diagrams and related technical documentation infield of electrical engineering and electronics »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.40 Graphic symbols for technical drawings, diagrams, diagrams and related technical documentation infield of electrical engineering and electronics »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.01 Machines rotating in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.01 Machines rotating in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E00 Terms and definitions »
National Standards for OKSTU »
ELECTRIC MACHINES »
Classification, nomenclature. Terms and Definitions. Designation »
As a Replacement Of:
GOST 2479-65: Electric machines. Forms of execution and their symbols
The Document References:
GOST 2479-65: Electric machines. Forms of execution and their symbols
The Document is Referenced By:
GOST 13267-73: Rotating electrical machines and directly connected them nonelectrical ones. Shaft heights and control methods
GOST 14191-88: Low power rotating electrical machines. Motors for sound recording equipment and electrical players of domestic purpose
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15880-83: Electric drills
GOST 15880-96: Electric drills. General specifications
GOST 16264.0-2018: Electric machines of low power. Engines General specifications
GOST 16264.0-85: Low-power electric motors
GOST 16313-97: Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. General specifications
GOST 17493-80: Electric machine frequency converters with power rating 250 kw up
GOST 18058-80: Three-phase asynchronous squirrel-cage submersible electric motors series ПЭД. Specifications
GOST 18200-90: Above 200 kW rotating electric machines. Synchronous engines. General specifications
GOST 183-74: Rotating electrical machines
GOST 18709-73: Rotating electrical machines of middle size. Mounting dimensions.
GOST 19523-74: The motors, three-phase asynchronous squirrel-cage series 4A with power from 0.06 to 400 kW. General specifications
GOST 20424-75: Motors three-phase asynchronous short-circuited built-in cold-oil-resistant. General specifications
GOST 20815-93: Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity
GOST 20832-75: Standard system of vibration. Electric rotating machines of mass up to 0,5 kg. Vibration limit
GOST 22407-85: Synchronous explicit-pole generators of general purpose
GOST 23111-78: Asynchronous three-phase short-circuited explosion-proof motors series V and VR with power from 0,25 to 110 kW. Specification
GOST 23264-78: Electric small machines. Conditional designation
GOST 24875-88: Small power electric machines. Tachogenerators. General specifications
GOST 24915-81: Three-phase asynchronous motors. Voltage 6000 V. Power from 200 to 1000 kW. Power ranges and mounting dimensions
GOST 27803-88: Adjustable electrical drives for machine tools building and robotechnics. General technical requirements
GOST 27803-91: Controlled electric drives controlled for metal working equipment and industrial robots. Technical requirements
GOST 28173-89: Rotating electrical machines. Rating and performance
GOST 28330-89: Asynchronous electrical machines with power from 1 to 400 kw inclusive. Motors
GOST 30195-94: Submersible asynchronous electric motors
GOST 31349-2007: Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations
GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements
GOST 4.154-85: Product-quality index system. Electrical rotating frames, number above 56 to 355 including. Nomenclature of indices
GOST 4541-70: Rotating electrical machines. Letter symbols of fixing and overall dimensions
GOST 9630-2018: Three-phase asynchronous motors with voltages above 1000 V. General specifications
GOST 9630-80: Three-phase asynchronous motors. General specifications.
GOST R 50735-95: Alternating-current generators from 2 to 30 kW for power take-off from motors of moving means. General specifications
GOST R 51689-2000: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical reguirements
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications
GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods
GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements
OST 32.50-95: Designing, manufacturing, installation and testing of electrical equipment for the diesel-electric rolling stock. Technical requirements
ST RK 1518-2006: Diesel locomotives. DC electric rotating traction machines. Requirements for acceptance programmes and test procedures
ST RK 1531-2006: Locomotives of main railways of 1520 mm gage. AC electric rotating tractive machinery. Requirements for acceptance programmes and test procedures
TU 16-521.646-85: Three-phase asynchronous motor type 4ААМ50В2М
TU 16-521.661-85: Single-phase asynchronous electric motor of the type DAK 86-60-3-H-IM8223-C18-POI-D18
TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions
TU 16-526.562-84: Asynchronous motors with increased slip 4AMS160 - 4AMS250. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.