GOST 30732-2006
ГОСТ 30732-2006
|
|
Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
Трубы и фасонные изделия стальные с тепловой изоляцией из пенополиуретана с защитной оболочкой. Технические условия.
Status: Effective
This standard applies to steel and shaped products with thermal insulation of polyurethane foam in a polyethylene sheath or steel sheeting, intended for underground laying of heat networks (in a polyethylene sheath - channel-free, with a steel sheath - in ducts and tunnels) and above-ground laying of heat networks (for pipes with a steel sheeting) with the following design parameters of the coolant: working pressure not more than 1.6 MPa and temperature not more than 140 degrees. C (a temperature increase of not more than 150 degrees is allowed. C within the schedule of high-quality regulation of heat supply 150 degrees C - 70 degrees C). In agreement with the project organization, it is allowed to use insulated pipes in a polyethylene sheath in non-passage channels. It is also allowed to use insulated pipes for pipelines transporting other substances (oil, gas, etc.)
Настоящий стандарт распространяется на стальные и фасонные изделия с тепловой изоляцией из пенополиуретана в полиэтиленовой оболочке или стальным защитным покрытием, предназначенные для подземной прокладки тепловых сетей (в полиэтиленовой оболочке - бесканальным способом, со стальной защитной оболочкой - в проходных каналах и туннелях) и надземной прокладки тепловых сетей (для труб со стальным защитным покрытием) со следующими расчетными параметрами теплоносителя: рабочим давлением не более 1,6 МПа и температурой не более 140 град. С (допускается повышение температуры не более 150 град. С в пределах графика качественного регулирования отпуска тепла 150 град. С - 70 град. С). По согласованию с проектной организацией допускается применение изолированных труб в полиэтиленовой оболочке в непроходных каналах. Допускается также примение изолированных труб для трубопроводов, транспортирующих другие вещества (нефть, газ и пр.)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/14/2007
SKU: RUSS21202
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.60 Heat and sound insulating materials »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.60 Heat and sound insulating materials »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh2 Sanitary, engineering and fire fighting equipment for buildings »
Zh24 Heating, ventilation and air conditioning »
The Document is Replaced With:
GOST 30732-2020: Steel pipes and fittings with thermal insulation from polyurethane foam with a protective sheath. Specifications
As a Replacement Of:
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 12.3.038-85: Occupational safety standards system. Construction. Works on thermal instulation of equipment and pipe lines. Safety requirements
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design
GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 23206-78: Rigid cellular plastics. Compression test method
GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 26996-86: Polypropylene and copolymers of propylene. Specifications
GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST 409-77: Plastics cellular and rubber cellular. Method for determination of apparent density
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST 9544-93: Pipeline cut-off valves
NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard
RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
SP 41-103-2000: Equipment and piping insulation engineering
SP 41-105-2002: Design and construction of underground thermal networks made of steel pipes with industrial thermal insulation made of polyurethane foam in polyethylene sheath
The Document is Referenced By:
GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications
GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions
GOST R 54468-2011: Flexible pipes with thermal insulation for district heating, hot and cold water networks. General specifications
GOST R 55596-2013: District heating systems. Standard for the stress and seismic analysis
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R 56380-2015: Water supply networks of pre-insulated pipes. Distant control of quality
GOST R 57385-2017: Trunk pipeline transport of oil and oil products. Construction of oil and oil products trunk pipelines. Thermal insulation of pipes and fittings
GOST R 58097-2018: Flexible reinfonced plastic pipes with thermal insulation and fittings for them for district heating and water-supply networks. General specification
ITS 27-2017: Manufacture further processing ferrous metals
Letter 27814/05-DG: On application of the standards
RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
SP 120.13330.2012: Subway systems
SP 124.13330.2012: Heating networks
SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines
STO ROSTEHEKSPERTIZA 10.001-2009: Thermal networks. Norms and methods of strength calculation
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
