imgalt

GOST 9.401-91

ГОСТ 9.401-91

Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

Единая система защиты от коррозии и старения. Покрытия лакокрасочные. Общие требования и методы ускоренных испытаний на стойкость к воздействию климатических факторов.

Status: Not effective - Superseded. Registration information 603-st dated 09/13/2018 (official website of Rosstandart); IUS 11-2018

The standard establishes general requirements and methods for accelerated testing of paint coatings (hereinafter - coatings) of metal and non-metal surfaces of products intended for operating conditions according to GOST 9.104 (except B5) and atmospheric types according to GOST 15150. The standard does not apply to aircraft coatings and underwater coatings shipbuilding products.

Стандарт устанавливает общие требования и методы ускоренных испытаний лакокрасочных покрытий (далее - покрытий) металлических и неметаллических поверхностей изделий, предназначенных для условий эксплуатации по ГОСТ 9.104 (кроме В5) и типов атмосферы по ГОСТ 15150. Стандарт не распространяется на покрытия летательных аппаратов и покрытий подводной части изделий судостроения.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Product Quality and Standards Management, 3/29/1991

SKU: RUSS21210

Price: $1,640.00

National keywords: защита; покрытия;

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Construction (Max) » Standards » Other state standards used in construction » 87 Paint and varnish industry »

Standards for pipe fittings (TPA) » 10. Production » 10.7 Coatings »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.60 Organic Coatings »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.60 Organic Coatings »

ISO classifier » 87 PAINT AND VARNISHING INDUSTRY » 87.020 Paint manufacturing processes »

National standards » 87 PAINT AND VARNISHING INDUSTRY » 87.020 Paint manufacturing processes »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T9 Unified system of protection against corrosion and aging of materials and products » T95 Paintwork and other polymer coatings »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Unified system of protection against corrosion and aging of materials and products (ESZKS) »


The Document is Replaced With:

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

As a Replacement Of:

GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing

GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing

GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing

The Document References:

GOST 10144-89: Enamels XB-124Specifications

GOST 10277-90: Putties. Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.016-79: Work area air

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents

GOST 12.3.005-75: Painting works

GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications

GOST 12707-77: Wash primers. Specifications

GOST 1347-77: Varnish БТ-783. Specifications

GOST 13744-87: Fluoroplast-3. Specifications

GOST 14923-78: Enamels ПФ-223. Specifications

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15865-70: Insulating varnish MЛ-92. Specifications

GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications

GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications

GOST 16302-79: Primer ФЛ-086. Specifications

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 18099-78: Enamels ML-152. Specifications

GOST 18335-83: Enamel НЦ-184. Specifications

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 19024-79: Enamels AC-182. Specifications

GOST 2.114-95: Unified system for design documentation. Specifications

GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics

GOST 20481-80: Enamels MЛ-1110. Specifications

GOST 20824-81: Varnish ЭП-730. Specifications

GOST 21227-93: Enamels ПФ-218. Specifications

GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications

GOST 22369-77: Enamels ЭП-567. Specifications

GOST 22438-85: Enamels ЭП-525. Specifications

GOST 23101-78: Silicon-organic thermostable enamel KO-58. Specifications

GOST 23122-78: Enamels KO-811 and KO-811K. Specifications

GOST 23143-83: Enamels ЭП-773. Specifications

GOST 23343-78: Primer ГФ-0119. Specifications

GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23522-79: Cold-rolled strip for hack saws. Specifications

GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications

GOST 23640-79: Enamels MЛ-197. Specifications

GOST 23750-79: Artificial weather apparatus with xenon emitters. General technical requirements

GOST 23760-79: Enamels MЧ-145. Specifications

GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications

GOST 24595-81: Primer B-MЛ-0143. Specifications

GOST 24709-81: Enamels ЭП-140. Specifications

GOST 24784-81: Enamels ПФ-188. Specifications

GOST 24927-81: Electronic products. General requirements to the temporary corrosion protection and test methods

GOST 25129-82: Primer GF-031. Specifications

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 25515-82: Enamels НЦ-256. Specifications

GOST 25718-83: Primers AK-069 and AK-070. Specifications

GOST 28196-89: Water-dispersion paints

GOST 28246-2006: Paint materials. Terms and definitions

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications

GOST 5406-84: Enamels НЦ-25. Specifications

GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications

GOST 5494-95: Pigmentary aluminium. Specifications

GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications

GOST 5971-78: Enamels for instruments. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 64-77: Enamels ГФ-230 BЭ. Specifications

GOST 6631-74: Enamels НЦ-132. Specifications

GOST 6745-79: Enamel ГФ-1426. Specifications

GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7462-73: Enamels НЦ-5123. Specifications

GOST 7930-73: Enamels НЦ-1125. Specifications

GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.008-82: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Terms and definitions

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.045-75: Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination

GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance

GOST 9.072-77: Unified system of corrosion and ageing protection. Paint coating. Terms and definitions

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9151-75: Enamels of types ГФ-92. Specifications

GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9640-85: Enamels ЭП-51. Specifications

GOST 9754-76: Enamels MЛ-12 type. Specifications

GOST R 51740-2001: Specifications for food products. General requirements for development and lay out

The Document is Referenced By:

GOST 10144-89: Enamels XB-124Specifications

GOST 10512-93: Magnetic and electromagnetic separators

GOST 10807-78: Road signs. General specifications

GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11127-78: Wooden drums for wire ropes. Specifications

GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications

GOST 12549-80: Passenger cars of mainline railways track 1520(1524) mm gauge. Painting. Technical requirements

GOST 14227-97: Dish washing machines. General specifications

GOST 15035-80: Underground scraper winches

GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.

GOST 15850-84: Mine parachutes for cages

GOST 15851-84: Suspension devices for mine cages

GOST 16120-86: Low-current timers

GOST 16121-86: Weak-current electromagnetic relays

GOST 16349-85: Cyclic mixers for building materials

GOST 17677-82: Light fixtures

GOST 18051-83: Wooden containers for heat-insulating materials and products

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 18689-81: Capacitors for electro thermal installations with frequencies of 0.5 - 10.0 kHz

GOST 18690-2012: Cable, wires, cord and armature. Marking, packing, carriage and storage

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 20481-80: Enamels MЛ-1110. Specifications

GOST 20850-2014: Wooden glued load bearing structures. General specifications

GOST 2103-89: General purpose mobile belt conveyors

GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications

GOST 22011-95: Passenger and freight elevators

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications

GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 23760-79: Enamels MЧ-145. Specifications

GOST 24045-2010: Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications

GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications

GOST 24595-81: Primer B-MЛ-0143. Specifications

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24722-81: Nuclear power vessel-encapsulated, pressurized-water reactor. General requirements

GOST 25097-2002: Windows from wood and aluminium. Specifications

GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses

GOST 26304-84: Industrial pipeline valves supplied

GOST 26698.1-93: Rigs for blast-holes drilling in open-cast mining works

GOST 26698.2-93: Underground drill rigs

GOST 26804-2012: Metal road safety barriers. Specifications

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 28408-89: Manual hoists and trolleys. General specifications

GOST 28603-90: Devices for uhf-therapy

GOST 28703-90: Automatic and semi-automatic instruments for indirect measurement of arterial pressure

GOST 28785-90: Preparative ultracentrifuges and rotors

GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification

GOST 30646-99: Central conditioners of general use. General specifications.

GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 30884-2003: Ready-mixed oil paints. General specifications

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31173-2003: Steel doors. Specifications

GOST 31173-2016: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 31562-2012: Рneumatic rock drills. General technical requirements

GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods

GOST 31564-2012: Pneumatic stopper drills. General technical requirements

GOST 31595-2012: Log loaders. Knuckle boom equipment. General specifications

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31994-2013: Traffic control devices. Roadside barriers. General technical requirements

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 32395-2013: Distribution boards for dwelling-houses. General specifications

GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications

GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications

GOST 33128-2014: Automobile roads of general use. Road restraint systems. Technical requirements

GOST 33129-2014: Automobile roads of general use. Road restraint systems. Methods of testing

GOST 33144-2014: Public roads. Road mirrors. Technical specifications

GOST 33290-2015: Paint materials used in building. General specifications

GOST 33665-2015: Road ambulances. Technical requirements and test methods

GOST 34388-2018: Steel pipes. Method of tests of corrosion resistance under the influence of salt spray

GOST 4045-75: Hand-operated bench vice

GOST 5088-2005: Hinges for windows and doors. Specifications

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-2014: Locks and building hardware. General specifications

GOST 538-88: Lock and building hardware

GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications

GOST 5971-78: Enamels for instruments. Specifications

GOST 6047-90: General purpose floodlights

GOST 6465-76: Enamels PF-115. Specifications

GOST 6625-85: Mine local ventilating fans

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control

GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST 8752-79: Metal insert rubber seals for rotating. Specifications

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications

GOST 9218-2015: Automotive vehicles for transportation of food liquids. Requirements and test methods

GOST 9218-86: Tanks for food liquids mounted on vehicles

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9630-2018: Three-phase asynchronous motors with voltages above 1000 V. General specifications

GOST 9630-80: Three-phase asynchronous motors. General specifications.

GOST 9754-76: Enamels MЛ-12 type. Specifications

GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v

GOST R 12.2.143-2009: Occupational safety standards systems. Photoluminescent evacuation systems. Requirements and methods of test

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50398-92: Fire hydraulic elevator. Specifications

GOST R 50401-92: Suction gauzes. Specifications

GOST R 50408-92: Foam mixers. Specifications

GOST R 50577-2018: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50997-96: Mine's gyrocompass. General specification

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51066-97: Profile survey systems of vertical shaft guides. General requirements and testing methods

GOST R 51067-97: Mine surveying angle meters. General specifications

GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51582-2000: Traffic control devices. Traffic signs 'International road transport control' and 'Road transport inspection'. General technical requirements. Application of traffic signs

GOST R 51615-2000: Commercial explosives. Packing, marking, transportation and storage

GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications

GOST R 51691-2000: Paint materials. Enamels. General specifications

GOST R 51691-2008: Paint materials. Enamels. General specifications

GOST R 51693-2000: Anticorrosion primers. General specifications

GOST R 51732-2001: Input-distributional boards for dwellings and public buildings. General specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications

GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods

GOST R 52018-2003: Shaft sinking hoppets. Specifications

GOST R 52020-2003: Water dispersible paint materials. General specifications

GOST R 52165-2003: Paint materials. Varnishes. General specifications

GOST R 52217-2004: Sinking rope attachments. Specifications

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 52291-2004: Log loaders. Knuckle boom equipment. General specifications

GOST R 52442-2005: Pneumatic stopper drills. General technical requirements

GOST R 52443-2005: Pneumatic rock drills. General technical requirements

GOST R 52491-2005: Coating materials, used in building. General specifications

GOST R 52607-2006: Traffic control devices. Roadside barriers. General technical requirements

GOST R 52750-2007: Panic and emergency exit devices. Specifications

GOST R 52767-2007: Automobile roads of the general use. Road facilities. Methods for determination of parameters

GOST R 52868-2007: Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods

GOST R 53223-2008: Chrysotile cement slabs for wall facing. Specifications

GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 53466-2009: Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters

GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications

GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications

GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 54771-2011: Mine electric locomotive transport. Trolley electric locomotives. General technical requirements and test methods

GOST R 54774-2011: Underground monorail diesel powered transport. General technical requirements and test methods

GOST R 54777-2011: Automatic systems for explosions localization and suppression of methane-dust-air mixture explosions in coal mines. General technical requirements. Test methods

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54828-2011: Gas-insulated metal-enclosed switchgear for nominal voltages above 110 kV. General technical specification

GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods

GOST R 55190-2012: Metal-enclosed switchgear for rated voltages up to and including 35 kV. General specifications

GOST R 55559-2013: Composite cylinders for liquefied petroleum gases at pressure up to 2,0 MPa. General technical requirements. Test methods

GOST R 55602-2013: Switching devices for railway traction network and power substations earthling. General specifications

GOST R 55716-2013: High-voltage switchgear. General specifications

GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements

GOST R 55736-2013: Mining equipment. Machines for drilling blast holes in open mountain developments. General technical requirements and test methods

GOST R 55737-2013: Mining equipment. Mine electric locomotive transport. Accumulator electric locomotives. General technical requirements and test methods

GOST R 56177-2014: Controlled door closing devices (door closers). Specifications

GOST R 56328-2014: Medical equipment. Mobile complexes for medical purpose. General specifications and test methods

GOST R 56622-2015: Removable insulating towers for operation on the railway contact network. Specifications

GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications

GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements

GOST R 58174-2018: Basket trolleys. Specifications

GOST R 58936-2020: Optics and Photonics. Endoscopes and medical endotherapeutic devices. General technical requirements and test methods

GOST R 59269-2020: Fire retardant (coating) on ​​steel on a hydraulic binder. Specifications

GOST R 8.929-2016: State system for ensuring the uniformity of measurements. Measuring complexes for railway contact networkРІР‚в„ўs parameters measuring. Technical requirements

GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual: Manual for impulse and low consumption fire extinguishing systems

MU 1.3.3.99.0123-2012: The use of flame retardants for steel structures, cables and cable routes in the construction of nuclear power plants. Quality control of work performance, determination of flame retardant efficiency and acceptance rules for operation.

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

ODM 218.3.006-2011: Methods for Calculating Toll for Passage via Tollroads and Road Facilities. Procedure for Levy and Review of Toll- Determination of Consumer Demand

ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei

ODM 218.3.103-2018: Recommendations for the use of screw piles on roads

ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs

ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

PB 13-84-95: Installation Standards for Charging, Delivery, And Mixing Equipment Intended for Mechanization of Blasting Operations

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

RD 50-703-91: Instructions. The basic supporting structures of electronic equipment. Technological requirements

RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures

SO 34.49.505-2003: Regulations for fire retardant coating for building constructions of buildings and facilities of power engineering enterprises

SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 46.13330.2012: Bridges and pipes

ST RK 1125-2002: Traffic signs. General specification. Put into effect in substitution of GOST 10807-78

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products

TR 174-05: Technical Recommendations for Determining the Durability of Finishing and Lining Materials

TSN 66-301-99: Requirements for Paints and Coatings Used in Construction Practices in the Moscow Region

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 3449-006-17416124-00: Cable welded trays. Technical conditions

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 3645-033-05785477-98: Torch propane-oxygen for powder surfacing GN-5P

TU 5210-001-25432924-2008: Fences, road, metal, barrier type

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 84-738-83: Gear pumps for pressure P = 0.5 MPa (5 kgf/cm2) for machine tools and other stationary machines

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!