GOST R 51685-2013
ГОСТ Р 51685-2013
|
|
Railway rails. General specifications.
Рельсы железнодорожные. Общие технические условия.
Status: Effective - Supersedes. (IUS 10-2014) By the order of Rosstandart of July 28, 2014 No. 826-st, the action of GOST R 51685-2000 was restored for voluntary use in the Russian Federation from 08/01/2014 to 01/06/2016
This standard applies to 1520 mm wide gauge rails intended for use on public and non-public rail tracks.
Настоящий стандарт распространяется на железнодорожные рельсы широкой колеи 1520 мм, предназначенные для эксплуатации на железнодорожных путях общего и необщего пользования
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 96
Approved: Federal Agency for Technical Regulation and Metrology,
10/14/2013
SKU: RUSS21229
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
45 Railway technology »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
National standards »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
As a Replacement Of:
GOST R 51685-2000: Railway rails. General specifications.
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 25.502-79: Methods of mechanical testing of metals
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8026-92: Levelling rules. Specifications
GOST 8233-56: Steel. Microstructure standards
GOST 8925-68: Flat clearance gauges for machine retaining devices. Design
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50542-93: Ferrous metals products for the permanent way tracks. Terms and definitions
GOST R 53442-2009: Basic norms of interchangeability. Geometrical product specifications. Tolerances of form, orientation, location and run-out
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R ISO 14284-2009: Steel and iron. Sampling and preparation of samples for determination of chemical composition
GOST R ISO 9001-2015: Quality management systems. Requirements
The Document is Referenced By:
GOST 32213-2013: Machines for rail welding, rail and rail fastening repair, transportion of long rails. General technical requirements
GOST 32216-2013: Special railway rolling stock. General technical requirements
GOST 33184-2014: Joint bars for rails of gauge railway. Specifications
GOST 33185-2014: Bars for insulating joints rails. Safety requirements and testing methods
GOST 33187-2014: Disk springs for rail joints. Specifications
GOST 33535-2015: Connections and crossings of railway tracks. Specifications
GOST 33788-2016: Freight and passenger coaches. Test methods for strength and dynamic quality
GOST 33939-2016: Cast details for freight wagons’ bogies. Methods of durability testing. Part 1. Side frame
GOST 34524-2019: Rails are railway. Non-destructive testing in operating conditions. General requirements
GOST 34664-2020: Thermite-welded railroad rails. Specifications
GOST 34665-2020: Electro-welded railway rails. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 55941-2014: Grooved rails. Specifications
GOST R 56944-2016: Cranes. Overhead crane railway. General specifications
GOST R 57076-2016: Field test centers for the railway rolling stock and the infrastructure elements. Technical requirements
GOST R 57077-2016: Electric clamp, assembly and split, for the connection of the rails and grounding wires. Technical requirements
GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control
GOST R 57181-2016: Thermite welding of rails. Technological process
PNST 190-2017: Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheel set
SP 119.13330.2012: Railways of 1520 mm
SP 119.13330.2017: Railways with 1520 mm track
SP 238.1326000.2015: Railways
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 314.1325800.2017: Tracks overland rail cranes. Design, arrangement and exploitation
SP 441.1325800.2019: Protection of buildings against vibration generated by rail. Design rules
SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules
SP 465.1325800.2019: Buildings and constructions. Subway vibration protection. Design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English |
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English |
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English |
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English |
Seismic building design code
Language: English |
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
