GOST R 54808-2011

ГОСТ Р 54808-2011

Pipeline valves. Leakage rates of valves.

Арматура трубопроводная. Нормы герметичности затворов

Status: Not effective - Canceled. Information about the registration of 440-st from 05.25.2015 (the official website of Rosstandart); IUS 2-2016

This standard establishes the norms and classes of tightness of valves of pipeline valves (hereinafter referred to as valves) of nominal diameters from DN 3 to DN 2000 for nominal pressures from PN 1 to PN 420 of all types (stop, return, safety, regulating, distribution and mixing, phase separation) and all types (valves, valves, taps and butterfly valves), as well as for combined fittings. The norms of tightness given in the standard are used for all types of tests, as well as for checking the tightness of a valve in service. This standard is suitable for conformity assessment purposes.

Настоящий стандарт устанавливает нормы и классы герметичности затворов трубопроводной арматуры (далее - арматура) номинальных диаметров от DN 3 до DN 2000 на номинальные давления от PN 1 до PN 420 всех видов (запорная, обратная, предохранительная, регулирующая, распределительно-смесительная, фазоразделительная) и всех типов (задвижки, клапаны, краны и дисковые затворы), а также для комбинированной арматуры. Нормы герметичности, приведенные в стандарте, применяют при всех видах испытаний, а также при проверках герметичности затвора арматуры в процессе эксплуатации. Настоящий стандарт пригоден для целей подтверждения соответствия

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 41

Approved: Federal Agency for Technical Regulation and Metrology, 12/13/2011

SKU: GOST104357

Price: $192.70


The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »


The Document References:

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52720-2007: Pipeline valves. Terms and definitions

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R ISO 8573-1-2005: Compressed air. Part 1. Contaminants and purity classes

MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems

OST 51.40-93: Natural combustible gases transported via main gas pipelines

SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control

The Document is Referenced By:

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements

GOST R 51115-97: Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55141-2012: Associated gas processing. Small-sized block gas - processing complexes. General technical requirements

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55610-2013: Oil measuring systems. General specifications

GOST R 55682.8-2013: Water-tube boilers and auxiliary installations. Part 8. Requirements for firing systems for liquid and gaseous fuels for the boiler

GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods

GOST R 55892-2013: Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 56005-2014: Pipeline valves. Reliability and safety practice for engineering and production by quality function deployment applying

GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements

GOST R 56028-2014: Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods

GOST R 56227-2014: Pipes and shaped products steel in polymer-mineral foam isolation. Specifications

GOST R 56286-2014: Gas-fueled shunting locomotives. General technical requirements

GOST R 56287-2014: Main-line liquefied natural gas turbine locomotives. General technical requirements

GOST R 56352-2015: Petroleum and natural gas industries. Production, storage and handling of liquefied natural gas. General safety requirements

GOST R 57817-2017: Underground gas storage. Design standards

OTT 1.3.3.99.0141-2012: Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SP 125.13330.2012: Petroleum product pipelines laid through cities and public areas

SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen

SP 240.1311500.2015: Storages of liquefied natural gas. Fire safety requirements

SP 89.13330.2016: Boiler installations

ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

ST TsKBA 031-2009: Pipe fittings. Passport. Development and design rules

ST TsKBA 031-2015: Pipeline valves and actuators for it. Passport. Development and design rules

ST TsKBA 055-2008: Pipe fittings. Valves valves with fluoroplast-4 seal and composite materials. Technical requirements and methods of mounting the sealing rings

ST TsKBA 065-2008: Pipe fittings. The nomenclature of indicators. Questionnaires for design and order

ST TsKBA 096-2012: Pipe fittings. The dependence of the average service life of the gate on the value of specific loads on the sealing surfaces

Customers Who Viewed This Item Also Viewed:

Rotating electrical machines
Language: English
Price: $206.80
Specification for plastic process pipeline design
Language: English
Price: $560.24
Nondestructive testing. Welded joints. Ultrasonic methods
Language: English
Price: $134.42
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Construction projects reliability and safety assurance system. Loads and impacts. Design norms.
Language: English
Price: $98.48
Loads and impacts
Language: English
Price: $338.40
Electrical trains. General technical requirements.
Language: English
Price: $249.10
Certification procedure for railway transport technical means
Language: English
Price: $560.24
Operation manual of civil airdromes of the Russian Federation
Language: English
Price: $793.14
Safety of machinery. Requirements for justification of safety
Language: English
Price: $135.36
Oil. General specifications.
Language: English
Price: $112.80
Steel. Method of photoelectric spectral analysis
Language: English
Price: $70.50
Flange connections of wellhead equipment. Types, basic parameters and dimensions
Language: English
Price: $61.10
Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
Language: English
Price: $136.30
Concretes. Methods for the determination of frost-resistance
Language: English
Price: $363.78
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $136.30
Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
Language: English
Price: $549.90
Electromagnetic compatibility of technical equipment. Construction machines with internal electrical power supply. Requirements and test methods
Language: English
Price: $563.06
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $604.42
Hygienic evaluation of clothes for children and adults
Language: English
Price: $63.92

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

All Departments

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!