imgalt

PNAE G-7-014-89

ПНАЭ Г-7-014-89

Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

Унифицированные методики контроля основных материалов (полуфабрикатов), сварных соединений и наплавки оборудования и трубопроводов АЭУ. Ультразвуковой контроль. Часть 1. Контроль основных материалов (полуфабрикатов).

Status: Not effective - Not applicable. By the order of Rostekhnadzor No. 360 dated 08/13/2018

The document establishes methods of ultrasonic quality control of basic materials (semi-finished products), including forgings, rolled sections, castings, sheets, pipes and stamped blanks used for the manufacture of equipment and pipelines, which are subj

Документ устанавливает методики ультразвукового контроля качества основных материалов (полуфабрикатов), включая поковки, сортовой прокат, отливки, листы, трубы и штампованные заготовки, используемых для изготовления оборудования и трубопроводов, на которы

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR Gosatomenergonadzor, 1/1/1989

SKU: RUSS21279

Price: $202.95

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of Gosatomnadzor of Russia »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Technical Supervision » Section II. State regulation of safety in use of atomic energy » II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision » 2. Nuclear power plants » Safety Guides »

Technical Supervision » Section II. State regulation of safety in use of atomic energy » II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision » 3. Structures and complexes with experimental and research nuclear reactors, critical and subcritical nuclear stands » Safety Guides »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.1 For nuclear power »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » III Nuclear and radiation safety » 4 Objects with nuclear power plants »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » III Nuclear and radiation safety » 3 Atomic stations »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.120 Nuclear power engineering » 27.120.99 Nuclear energy, other aspects »


The Document References:

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents

GOST 12.2.002-91: Occupational safety standards system. Agricultural machinery. Methods of safety evaluation.

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

SN 245-71: Sanitary standards for the design of industrial enterprises

The Document is Referenced By:

ATPE 9-09: A typical program for the operational control of the state of the base metal and welded joints of equipment and pipelines of nuclear power plants with VVER-1000 RP during operation

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 108.958.03-96: Steel forgings for power equipment. Ultrasound Testing Technique

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.

PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination

PNAE G-7-031-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part III. Thickness measurement of monometals, metals and corrosion resistant coat

RD 34.10.117-92: Method for Development of Specified Quantity Allowances for Standby Equipment and Spare Parts for Energy System Repair and Maintenance

RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants

RD EO 1.1.2.01.0086-2014: Quality Assurance in the Repair of Nuclear Power Plant Systems and Equipment. Main provisions

RD EO 1.1.2.25.0937-2013: Nondestructive control. Uniform requirements for the form and content of technological maps

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

TU 108.11.853-87: Procurement of parts from purchased long products

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!