imgalt

GOST 12.1.012-90

ГОСТ 12.1.012-90

SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

Система стандартов безопасности труда. Вибрационная безопасность. Общие требования

Status: Not effective - Superseded

The standard applies to workplaces where a person is exposed to vibration, machinery and equipment and technological processes that are sources of vibration. The standard does not apply to rolling stock, rail transport and aircraft. The standard establishes general requirements for the provision of vibration occupational safety in the sectors of the national economy.

Стандарт распространяется на рабочие места, на которых человек подвергается воздействию вибрации, машины и оборудование и технологические процессы, являющиеся источниками вибрация. Стандарт не распространяется на подвижной состав, железнодорожного транспорта и воздушные суда. Стандарт устанавливает общие требования к обеспечению вибрационной безопасности труда в отраслях народного хозяйства.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 7/13/1990

SKU: RUSS21388

Price: $494.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 1 General occupational safety requirements »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 5 Protection against mechanical vibrations » 5.1 Vibration »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.160 Human exposure to vibration and shock »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.160 Human exposure to vibration and shock »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »


The Document is Replaced With:

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

As a Replacement Of:

GOST 12.1.012-78: Occupational safety standards system. Vibration. General safety requirements

GOST 12.1.034-81: Occupational safety standards system. Vibration. General requirements for measurements

GOST 12.1.042-84: Occupational safety standards system. Local vibration. Measurement methods

GOST 12.1.043-84: Occupational safety standards system. Vibration. Methods of measurement at workplaces in industrial premises

The Document References:

GOST 12.0.002-80: Occupational safety standards system. Terms and definitions

GOST 12.4.012-83: Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements

GOST 12.4.094-88: Occupational safety standards system. Method for determination of dynamical characteristics of human body under vibration action

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 16263-70: State system for ensuring the uniformity of measurements. Metrology. Terms and definitions

GOST 17770-86: Manual machines

GOST 24346-80: Vibration. Terms and definitions

GOST 26043-83: Vibration. Dynamic characteristics of stationary machines. General

GOST 26568-85: Vibration. Methods and means for protection Classification.

GOST 27259-87: Earth-moving machinery. Operator seat. Transmitted vibration

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

The Document is Referenced By:

GOST 10141-91: Rod and ball mills

GOST 10223-97: Weighing batchers of periodic operation

GOST 10393-99: Piston-type air compressors for raiway equipment. General specifications

GOST 10512-93: Magnetic and electromagnetic separators

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 10700-97: Waste paper and board. Specifications

GOST 10921-90: Radial and axial fans. Aerodynamic testing methods

GOST 11030-93: Motor graders

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.040-83: Occupational safety standards system. Laser safety. General

GOST 12.1.049-86: Occupational safety standards system. Vibration. Methods for measurement on operator's seats of automotive wheel road-construction vehicles

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal

GOST 12.2.009-80: Metalworking machines

GOST 12.2.009-99: Metal-working machines. General safety requirements

GOST 12.2.011-75: Construction and road machines

GOST 12.2.015-93: Machines and equipment for glass industry. General safety requirements

GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements

GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements

GOST 12.2.017-93: The forging and pressing equipment general safety requirements

GOST 12.2.022-80: Conveyers.

GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements

GOST 12.2.026.0-93: Woodworking equipment safety requirements for design

GOST 12.2.029-88: Machine tool attachments

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction

GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.

GOST 12.2.045-94: The equipment for production of rubber-technical products

GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements

GOST 12.2.072-98: Industrial robots. Robotized technological systems. Safety requirements and testing methods

GOST 12.2.084-93: Occupational safety standards system. Machines and equipment for laundries and dry-cleaning enterprises. General safety requirements

GOST 12.2.086-83: Positive displacement hydraulic drives and lubrication systems

GOST 12.2.088-83: Standards system of labor safety. Ground equipment for well repair and realization. Safety general requirements

GOST 12.2.092-94: Occupational safety standards system electromechanical and electrical heating equipment for the catering industry

GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock

GOST 12.2.113-2006: Crank presses. Safety requirements

GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements

GOST 12.2.118-2006: Shears. Safety requirements

GOST 12.2.119-88: Occupational safety standards system. Rotary and rotary conveyor automatic lines. General safety requirements

GOST 12.2.121-88: Occupational safety standards system. Industrial tractors. General safety requirements

GOST 12.2.122-88: Occupational safety standards system. Industrial tractors. Methods for estimation safety

GOST 12.2.123-90: Textile machinery

GOST 12.2.124-90: The food industry equipment

GOST 12.2.125-91: On-land cable equipment

GOST 12.2.130-91: Occupational safety standard system. Single-bucket excavators. General safety and ergonomical requirements for the operator's position and methods of their control

GOST 12.2.135-95: Equipment for processing of meat and poultry farming products

GOST 12.2.138-97: Industrial sewing machines

GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST 12.2.140-2004: Small tractors. General safety requirements

GOST 12.2.140-97: Small tractors, powered blocks and motor cultivators. General requirements for safety

GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.005-75: Painting works

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements

GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 12.3.027-92: Foundry work

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.3.031-83: Occupational safety standards system. Work with mercury. Safety requirements

GOST 12.3.033-84: Occupational safety standards system. Constructing machines. General requirements of safety

GOST 12.3.035-84: Construction. Painting. Safety requirements

GOST 12.3.038-85: Occupational safety standards system. Construction. Works on thermal instulation of equipment and pipe lines. Safety requirements

GOST 12.3.040-86: Occupational safety standards system. Construction. Roofing and water proofing. Safety requirements

GOST 12.3.042-88: Occupational safety standards system. Woodworking manufacture. General safety requirements

GOST 12.3.046-91: Occupational safety standards system. Automatic fire-fighting sets. General technical requirements

GOST 12.4.002-97: Vibration protection means for hands

GOST 12.4.012-83: Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements

GOST 12588-81: Logging electrometer cutters. Types and main parameters

GOST 12617-78: Ship's cargo winches. General specifications

GOST 13531-74: Concrete placers for precast reinforced concrete factories

GOST 13556-91: Building tower pillars building tower pillars

GOST 13822-82: Generating sets and moving diesel-power stations. General specifications

GOST 14294-75: Pneumatic hand shears and nibblers. Specifications

GOST 14658-86: Positive-displacement pumps for hydraulic drives

GOST 14940-96: Bleached sulphate pulp made of deciduous (aspen) wood. Specifications

GOST 15035-80: Underground scraper winches

GOST 16349-85: Cyclic mixers for building materials

GOST 16469-79: Canal excavators

GOST 16519-78: Portable tools. Methods for measurement of parameters of vibration

GOST 16844-93: Vibration

GOST 17.2.2.03-87: Nature protection. Atmosphere. Rates and methods of measuring carbon monoxide and hydrocarbons content in exhaust gases of petrol-engine vehicles. Safety requirements

GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement

GOST 17335-79: Positive displacement pumps

GOST 17770-86: Manual machines

GOST 18517-84: Garage compressors

GOST 18962-86: Floor-mounted machines of railless electric transport

GOST 19423-81: Household electric coffee grinders

GOST 19716-81: Automatic pneumatic rapier looms

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 20680-86: Vertical apparatuses with mechanical mixers

GOST 21393-75: Automobiles with diesel engines. Smoke emission. Norms and methods of measurements. Safety requirements

GOST 21694-94: Mechanical welding equipment

GOST 21915-93: Asphalt pavers

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22247-96: Centrifugal and section pumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods

GOST 22827-85: General purpose self-propelled boom cranes

GOST 22859-77: Hydraulic auto hoisters

GOST 23833-95: Commercial refrigeration equipment

GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements

GOST 24005-80: Stationary natural-circulation steam boilers

GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications

GOST 24282-86: Flexible-way electric powered vehicles. Testing methods

GOST 24282-97: Floor-mounted flexible electrified vehicles. Testing methods

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 25051.4-83: Electrodynamic vibration testing equipment. General specifications

GOST 25938-90: Luffing-jib slewing deck-mounted cranes. General specifications

GOST 26287-84: Household electric pumps

GOST 26698.1-93: Rigs for blast-holes drilling in open-cast mining works

GOST 26698.2-93: Underground drill rigs

GOST 26699-98: Underground drilling rigs. General specifications and test methods

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 27336-93: Truck concrete pumps

GOST 27338-93: Concrete mixing plant

GOST 27339-93: Mixer trucks

GOST 27412-93: Jaw crushers

GOST 27598-94: Running rollers road vibration self-moving

GOST 27614-93: Cement carriers

GOST 27636-95: Stone extraction and processing equipment

GOST 27811-95: Tar pavers

GOST 27816-88: Asphalt paver. Test methods

GOST 27945-95: Asphalt mixing plants

GOST 28110-89: Equipment for the cheese grain production

GOST 28192-89: Waste of non-ferrous metals and alloys. Methods of sampling, sample preparation and test methods

GOST 28193-89: Natural-circulation stationary steam boilers with steam capacity of less than 4 ton / hour

GOST 28297-89: Opening and cleaning machines for cotton

GOST 28531-90: Cheese presses

GOST 28535-90: Drafting machines

GOST 28547-90: Positive displacement refrigeration compressors

GOST 28556-90: Outboard engines

GOST 28708-2001: Means of small mechanization of agricultural works. Safety requirements

GOST 28775-90: Gas pumping units driven with gas turbine. General specifications

GOST 28969-91: Stationary steam low-capacity turbines

GOST 28988-91: Positive-displacement hydraulic drives, pneumatic drives and lubricating systems

GOST 29328-92: Stationary gas turbines for turbo generators. General technical requirements

GOST 30035-93: Scrapers. General specifications

GOST 30067-93: Universal single bucket full turning excavators

GOST 30275-96: Manipulators for contact spot welding. General specifications

GOST 30406-96: Churns for household use. Safety requirements and test methods

GOST 30443-97: Technological faundry equipment. Methods of control and estimation of safety

GOST 30534-97: Means of measurement for linear and angular dimensions. Safety requirements and test methods

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30566-98: Filter Perlite powder. Specifications

GOST 30646-99: Central conditioners of general use. General specifications.

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 30873.10-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 10. Nibblers and shears

GOST 30873.11-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 11. Fastener driving tools

GOST 30873.12-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 12. Saws and files with reciprocating action and saws with oscillating or rotating action

GOST 30873.13-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 13. Die grinders

GOST 30873.14-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 14. Stone-working tools and needle scalers

GOST 30873.3-2006: Hand-held portable power tools. Measurement of vibrations at the handle. Part 3. Rock drills and rotary hammers

GOST 30873.8-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 8. Polishers and rotary, orbital and random orbital sanders

GOST 30873.9-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 9. Rammers

GOST 31183-2002: Machines for forestry. Hedge Trimmers and brush cutters on gasoline motors. Safety requirements. Test methods

GOST 31185-2002: Vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains

GOST 31191.4-2006: Vibration and shock. Measurement and evaluation of human exposure to whole-body vibration. Part 4. Guidelines for evaluation of the effects of vibration on passengers and crew comfort in rail vehicles

GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace

GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements

GOST 31343-2007: Machines and equipment for processing and decontamination of a fluid manure. Test methods

GOST 31344-2007: Machines and equipment for removing the manure. Test methods

GOST 31346-2007: Instаllation for processing of dung. Test methods

GOST 31541-2012: Hammers. Safety requirements

GOST 31564-2012: Pneumatic stopper drills. General technical requirements

GOST 31593-2012: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST 34065-2017: All-terrain vehicles. Technical requirements and test methods

GOST 3564-84: Multioutlet oil-lubricating plants. Specifications

GOST 4.22-85: Quality ratings system. Lifting capacity cranes. Quality charasteristics nomenclature

GOST 4.377-85: Product-quality index system. Single-bucket excavators. Index nomenclature

GOST 5534-79: Floating cranes. Specifications

GOST 5976-90: Centrifugal fans for general use

GOST 6113-84: Horizontal expellers for pottery ware

GOST 6134-87: Rotor-dynamic pumps

GOST 6937-91: Conic crushers

GOST 7237-82: Welding converters

GOST 8339-84: Oil pressure installations for hydraulic turbines

GOST 8390-84: Electro hydraulic presses for blocking

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.402-80: Metal surface preparation for painting

GOST 9231-80: Twin-shaft blenders of paddle type

GOST 9274-81: Rolls for stone separating and ceramic mixture grinding

GOST ISO 10326-1-2002: Vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements

GOST ISO 10819-2002: Vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand

GOST ISO 8002-99: Mechanical vibration. Land vehicles. Method for reporting measured data

GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation

GOST R 12.2.011-2003: Occupational safety standards system. Building, road, and earth-moving machinery. General safety requirements

GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST R 12.2.142-99: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements

GOST R 12.2.144-2005: Occupational safety standards system. Fire-fighting technics. Safety requirements. Test methods

GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements

GOST R 17.2.2.06-99: Nature protection. Atmosphere. Norms and methods of measuring of carbon monoxide and hydrocarbons content in exhaust gases from motor vehicles with spark ignition engines used gas fuel

GOST R 50060-98: Gasoline chain saws. Safety requirement. Methods of testing

GOST R 50083-92: Concrete pump. General specifications

GOST R 50084-92: Truck mixer. General specifications

GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements

GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50703-94: Heading machines having cutter heads mounted on booms. Test methods

GOST R 50723-94: Laser safety. General requirements for development and operation the laser products

GOST R 50761-95: Marine, locomotive and industrial diesels. General safety requirements

GOST R 50783-95: Power generating sets and mobile electric power stations with internal combustion engines. General technical requirements

GOST R 50786-2012: Metal-cutting household machine-tools. Safety requirements

GOST R 50786-95: Metal-cutting machine tools household. Safety requirements

GOST R 50787-95: Woodworking equipment. Woodworking transportable machines semi-fixed, for individual use. General requirements of safety

GOST R 50804-95: Cosmonaut's habitable environments on board of manned spacecraft. General medicotechnical requirements

GOST R 50863-96: Small tractors, powered blocks and motor cultivators. General requirements for safety

GOST R 50906-96: Pile driving equipment. General safety requirements

GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST R 50943-2011: All-terrain vehicles. Technical requirements and test methods.

GOST R 50943-96: Snowbogmobiles. Safety requirements

GOST R 50950-96: Front end loaders with telescopic boom. General specifications

GOST R 50953-96: Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods

GOST R 51101-2012: Metalworking and woodworking machines. Testing methods of compliance with safety requirements

GOST R 51101-97: Metalworking and woodworking machines small-size. Testing methods safety requirements

GOST R 51126-98: Liquid vacuum and gravitation filters. Safety requirements and test methods

GOST R 51127-98: Liquid filters periodic action, working under pressure. Safety requirements and test methods

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods

GOST R 51249-99: Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51376.1-99: Hand-held portable power tools. Measurement of vibrations at the handle. Part 1. General

GOST R 51376.2-99: Hand-held portable power tools. Measurement of vibrations at the handle. Part 2. Chipping hammers and riveting hammers

GOST R 51376.3-99: Hand-held portable power tools. Measurement of vibrations at the handle. Part 3. Rock drills and rotary hammers

GOST R 51376.4-99: Hand-held portable power tools. Measurement of vibrations at the handle. Part 4. Grinders

GOST R 51376.5-99: Hand - held portable power tools. Measurement of vibrations at the handle. Part 5. Pavement breakers and hammers for construction work

GOST R 51376.6-99: Hand-held portable power tools. Measurement of vibrations at the handle. Part 6. Impact drills

GOST R 51399-99: Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains

GOST R 51563-2000: Liquid centrifugal separators. Safety requirements. Test methods

GOST R 51564-2000: Drying and evaporating apparatus and plants. Safety requirements. Test methods

GOST R 51632-2000: Technical aids for disabled persons. General technical requirements and test methods

GOST R 51666-2000: Cold self-propelled planers for road building purpose. General specifications

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 51738-2001: Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods

GOST R 51754-2001: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST R 51764-2001: Rehabilitation transportation boarding devices for disabled persons. General technical requirements

GOST R 51863-2002: Machines and tractors for forestry. Safety requirements

GOST R 51922-2002: Plate compactor. General specifications

GOST R 51931-2002: Industrial centrifuges. Safety requirements. Test methods

GOST R 52033-2003: Motor vehicles with petrol engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition

GOST R 52084-2003: Electric household appliances. General specifications

GOST R 52122-2003: Technical diagnostics. Mainline locomotives. On-board diagnostic systems. General requirements

GOST R 52148-2003: Skid-steer loaders. General specifications

GOST R 52156-2003: Self-propelled road rollers. General specifications

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 52280-2004: Trucks. General technical requirements

GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods

GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications

GOST R 52442-2005: Pneumatic stopper drills. General technical requirements

GOST R 52543-2006: Hydraulic drives. Safety requirements

GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52615-2006: Compressors and vacuum pumps. Safety requirements. Part 2. Vacuum pumps

GOST R 52744-2007: Submersible pumps and pump units. Safety requirements

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52914-2008: Tractor and combine harvester engines. Vibroacоustic characteristics and testing methods

GOST R 53130-2008: Safety of attractions. General requirements

GOST R 53178-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Test methods

GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods

GOST R 53463-2009: Hammers. Safety requirements

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements

GOST R 53926-2010: End milling cutters with shell-type inserted blades for woodcutting. General specifications

GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications

GOST R 54435-2011: Wind power plant constructions. Base safety requirements

GOST R 54651-2011: Organic fertilizers on basis of sewage sludge. Specifications

GOST R 55571-2013: Organic fertilizers on basis of solid domestic waste. Specifications

GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process

GOST R ISO 10326-1-99: Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements

GOST R ISO 10819-99: Mechanical vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand

Indication O-1515u: Recommendations for planning labor protection measures in railway transport

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)

Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"

Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)

Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"

MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 13-6.2000: Method for the Determination of Unfitness of Residential Occupancies and Dwelling Units for Occupation

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MU 2.2.2.1914-04: Hygienic evaluation of tractors and agricultural machines

MU 2.2.8/2.6.1.67-02: Organization of ventilation at radiation facilities

NB ZhT TsT 05-98: Diesel engines of locomotives and self-propelled trains. Safety Regulations

NPB 101-2005*: Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods

NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods

NPB 181-99: Fire water tenders , complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 188-2000: Fire aerial ladder. General technical requirements. Test methods

NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods

NPB 194-2000: Fire engineering. Smoke ejector truck. General technical requirements. Test methods

NPB 195-2000: Fire water tenders, complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 197-2001: Fire elevators. General technical requirements. Test methods

NPB 198-2001: Fire elevators, complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 307-2002: Fire fighting vehicles. Designation

NPB 311-2002: Fire equipment. Command vehicle. General technical requirements. Test methods

NPB 312-2003: Fire engineering. Rescue vehicle. General technical requirements. Test methods

NPB 314-2003: Firefoam elevators. General technical requirements. Test methods

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry

NTP 23-94: Norms of plant design for the production of soap

NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization

NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision

NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry

ONTP 01-94: Sectoral norms of technological design of enterprises in the automotive industry. Forge and press shops

ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)

ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping

ONTP 06-95: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization, automation, and office equipment

ONTP 07-95: Sectoral norms of technological design of enterprises in the automotive industry. Foundries and warehouses of charge and molding materials

ONTP 08-96: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the repair of sanitary and heat power equipment

ONTP 09-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Mechanical repair shops

ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)

ONTP 11-94: Sectoral norms of technological design of enterprises in the automotive industry. Repair shops of electrical equipment

ONTP 14-96 (I): Sectoral norms of technological design of enterprises in the automotive industry. Mechanical processing shops

ONTP 14-96 (II): Sectoral norms of technological design of enterprises in the automotive industry. Assembly shops

OST 1-42172-83: Control of protective environment during welding of parts from titanium alloys

OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements

OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements

OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements

OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.

OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.

OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 26.260.452-92: Occupational safety standards system. Rotor drum vacuum baking ovens in explosion-proof design. General safety requirements.

OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-06-2028-96: Labour safety standard system. General purpose industrial grade pumps. Safety requirements.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 35-23-83: Occupational safety standards system. Construction of highways. Asphalt and concrete and black coatings and foundations. Safety requirements.

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OST 68-12.0.01-02: Sectoral system of standards for labor safety. Main provisions

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

OTT 08042462: Instruments and automation equipment for nuclear power plants. General technical requirements

P 73-2000: Recommendations for field studies and ongoing monitoring of the vibration of hydraulic structures of power plants

P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements

PB: Safety regulations and industrial sanitation for loading and unloading operations on railway transport

PB: Safety regulations and industrial sanitation for the repair and maintenance of railway tracks and structures

PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises

PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

POT R M 001-97: Rules for labor protection in logging, woodworking industries and during forestry work. Part I

POT R M-001-97: Rules for labor protection in logging, woodworking and forestry operations

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations

POT R M-008-99: Intersectoral rules on labor protection during the operation of industrial vehicles (floor rail-free wheeled vehicles)

POT R M-009-99: Intersectoral labor protection regulations for the production and use of mercury

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R M-023-2002: Industry-Wide Occupational Safety and Health Requirements for Gas Flame Working of Materials

POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities

POT R M-026-2003: Intersectoral rules on labor protection during the operation of gas facilities of organizations

POT R M-027-2003: Intersectoral rules on labor protection in road transport

POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures

POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars

POT R O 29-001-93: Labor protection regulations for printing companies

POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry

POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations

POT R O-112-002-98: Rules for labor protection during the operation of trunk oil pipelines

POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport

POT R O-13153-TsT-926-02: Industry safety rules for railroad solid fuel bases

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

POT R O-29-002-94: Occupational Safety Rules for Publishers

POT R O-29-003-95: Occupational Safety Rules for Bookstores

POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock

POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway

POT R O-45-005-95: Occupational Safety and Health Requirements for Work on Cable Communications Lines and Closed-Circuit Radio Broadcasting (Installation of Closed-Circuit Radio Networks)

POT R O-78-001-96: Rules on labor protection in units of the state fire service of the Ministry of Internal Affairs of Russia

POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables

POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry

POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry

POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport

POT RO-32-TsV-406-96: Rules for labor protection during the current repair and preparation for filling tanks for oil products and bunker-type cars for oil bitumen

R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry

R 470-82: Safety Guide and Special Issues of Industrial Sanitation in Construction of Main Pipelines in Western Siberia

R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions

RD 03-85-95: Rules On the Certification of Controlled Goods for Potentially Hazardous Industrial Production, Objects and Works

RD 05-620-03: Procedural Guidelines for Conformity Assessment of Industrial Safety of Mechanized Treatment Facilities

RD 08-272-99: Safety requirements for drilling equipment for the oil and gas industry.

RD 12.23.102-85: Mountain cars. Method for establishing values of noise and vibration characteristics

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 153-12.2-003-99: Ensuring noise and vibration safety at coal enterprises

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant

RD 153-34.2-03.205-2001: Safety Requirements for Maintenance of Hydraulic Structures and Hydromechanical Equipment of Power Utility Organizations

RD 153-39.1-36-99: Recommendations for the unification of oil pumps for oil refineries

RD 153-39.4-113-01: Standards for technological design of main pipelines

RD 153-39TN-008-96: Guide to Operation, Maintenance, and Repair of Equipment and Facilities of Petroleum Pumping Stations

RD 153-39TN-009-96: Ordinance on the System for Maintenance and Repair of Electrical Installations of Trunk Petroleum Pipelines Part I

RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.

RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 31.31.41-86: Support Facilities for Loading/Offloading Operations. Design Standards

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities

RD 34.03.502-91: Data Sheet for Sanitary Working Conditions in a Shop

RD 34.21.306-96: Procedural Guidelines for Inspection of the Dynamic State of Structural Elements of Structures and Equipment Foundations at Facilities of the Energy Industry

RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 50-394-83: Guidelines. Vibration. General requirements for regulatory and technical documents. Valid Parameters

RD 51-00158623-06-95: The use of emergency sources of electricity at the KS MG, GPP and other gas industry facilities

RD 51-1-96: Instruction on protection of environment during construction of onshore wells at fields containing multicomponent hydrocarbons, including hydrosulphuric hydrocarbons.

RM 25 951-90: APCS. Tasks for the general designer to design in adjacent parts of the automation project. Part 3. Premises for automated process control systems and automation systems. Cable facilities. Openings and embedded devices

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RTM 108.021.102-85: Steam turbine power units. Foundation requirements

Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)

SanPiN 2.2.0.555-96: Hygienic Requirements for the conditions of Work of Women

SanPiN 2.2.2.540-96: Technological processes rawstock materials and equipment hand tools. Hygienic requirements for hand tools and organization of work

SanPiN 2.2.3.570-96: Hygienic Requirements for Coal Mining Industry and Organization of Work

SanPiN 5791-91: Sanitary rules and regulations on the design and operation of greenhouses and greenhouses

SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities

SN 2.5.2.048-96: Vibration levels on board marine ships. Sanitary norms

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-03-99: Occupational safety in construction part one. General safety requirements

SO 34.23.603: Guidelines for the testing of conveyor belts (feeders)

SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants

SP 11-102-97: Engineering environmental site investigations for construction

SP 2.2.1.1312-03: Occupational hygiene enterprise designing building reconstruction and maintenance. Hygienic requirements to the designing of new and reconstructible industrial enterprises

SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument

SP 20.13330.2011: Loads and impacts

SP 23-105-2004: Evaluation of vibration in the design, construction and operation of subway

SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling

SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing

SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

ST RK 1520-2006: Locomotives with gage 1520 mm. Requirements for application of ecological control

ST SSFZhT TsT-TsP 099-2003: Locomotives, engine wagon and special self-propelled rolling stock of railways. The driver's seat. Test methods for checking the indicator "Coefficient of vibration transmission of the driver's seat"

ST SSFZhT TsT-TsRB 089-2000: Cranes, type shooting on the course. Typical test methods for determining the levels: sound and sound pressure, external noise (sound) and vibration (mean square values of vibration accelerations)

STB 1208-2000: Construction and finishing machines. General safety requirements. Test methods

STB 1357-2002: Industrial sewing machines. General specifications

STB 1390-2003: Woodworking equipment. Compact moveable, transportable woodworking machines for individual use. General safety requirements

STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods

STO: Thermal power plants. Methods of assessing the condition of the main equipment

TR 162-04: Technical recommendations on the use of reinforced concrete pipes with an inner plastic sheath

TR 88-98: Technical recommendations on the installation technology of polymer concrete pipes for microtunnel laying of sewers with an internal diameter of 300-1200 mm

TSN 23-315-2000: Allowable Levels of Noise and Vibration and Soundproofing Requirements for Residential and Public Buildings

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 24.08.1144-79: Car Decker 12U6

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

TU 5712-001-01394484-00: Perlite Filtering Powder. Technical Specifications

VNTP 04-94: Engineering Design Standards for Wine Bottling Plants

VNTP 12-94K: Engineering Design Standards Facilities of the Canned Fruits and Vegetables Industry

VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)

VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities

VNTP 35-93: Engineering Design Standards for Alcoholic Beverage Plants/Distilleries

VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry

VRD 39-1.10-029-2001: Standard programs and methods for conducting preliminary, acceptance and operational tests of electrical units and power plants with a piston and gas turbine drive

VRD 39-1.10-071-2003: Rules of technical operation of power plants for the own needs of OAO Gazprom objects

VRD 39-1.13-008-2000: Requirements for ecological safety during the operation of power plants on offshore oil and gas platforms of the Arctic shelf

VRD 39-1.13-057-2002: Work Management Procedure for Environmental Protection During Well Construction

VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations

VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry

VSTP 6.01-92: Sanitary requirements for the design of dairy enterprises

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!