GOST 14771-76
ГОСТ 14771-76
|
|
Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
Дуговая сварка в защитном газе. Соединения сварные. Основные типы, конструктивные элементы и размеры
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 553 of 06/18/92
The standard establishes the main types, structural elements and dimensions of welded joints from steels, as well as alloys on iron-nickel and nickel bases, performed by arc welding in shielding gas. The standard does not establish the main types, structural elements and dimensions of welded joints of steel pipelines according to GOST 16037-80.
Стандарт устанавливает основные типы, конструктивные элементы и размеры сварных соединений из сталей, а также сплавов на железоникелевой и никелевой основах, выполняемых дуговой сваркой в защитном газе. Стандарт не устанавливает основные типы, конструктивные элементы и размеры сварных соединений стальных трубопроводов по ГОСТ 16037-80.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
7/28/1976
SKU: RUSS21392
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
25 Mechanical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Welding materials »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Gases »
Standards for pipe fittings (TPA) »
10. Production »
10.3 Welding »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National standards »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V05 Welding and cutting of metals. Soldering, riveting »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
One-piece connections (welding, riveting, soldering, etc.) »
As a Replacement Of:
GOST 14771-69: Seams of welded connections. Arc welding in shielding gases. Main types and structural elements
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
Letter 18878-IK/03: About the typo in GOST 14771-76
The Document is Referenced By:
ATK 24.218.02-90: Reinforcing Rings for Vessels and Apparatus. Design, Dimensions, and Technical Requirements
GOST 10512-78: Magnetic and electromagnetic separators. Specification
GOST 11265-73: Bitts. Specifications
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 12393-2013: Line fittings for overhead system of railways. General common requirements
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 13531-74: Concrete placers for precast reinforced concrete factories
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications
GOST 15850-84: Mine parachutes for cages
GOST 15851-84: Suspension devices for mine cages
GOST 16098-80: Welded joints of clad corrosion resistant steel. Main types, design elements and dimensions
GOST 16140-77: Collapsible racks. Specifications
GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications
GOST 17032-2022: Horizontal steel tanks for petroleum products. Specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 19822-88: Industrial container. Specifications
GOST 20131-80: Pattern plates
GOST 2021-90: Ship's steel manholes. Specifications
GOST 20259-74: General-purpose containers. General technical requirements
GOST 20259-80: Universal containers
GOST 20386-74: Bottom boards. Specifications
GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements
GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications
GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification
GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
Specifications
GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications
GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23092-78: Sectional pallet box for topographical maps. Specifications
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-78: Structural metalwork. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23173-96: Garden wheel barrows
GOST 23410-78: Shield box viewing windows. Types, construction and dimensions
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23484-79: Electrohydraulic-plants for removing of cores. Technical requirements
GOST 23682-79: Steel stepped columns for buildings with general-purpose overhead electric cranes of 50 ton capacity. Specifications
GOST 23982-85: Fertilizing machinery
GOST 24138-80: Pipe-line fastening parts. Welded clamps. Design and dimensions
GOST 24537-80: Protective housings. Design and dimensions
GOST 24538-80: Telescopic protective housings. Design and dimensions
GOST 24539-80: Quick changeable telescopic protective housings. Design and dimensions
GOST 25088-81: Ship's doors. Specifications
GOST 25088-98: Ship's doors. Specifications
GOST 25309-94: Covers of access hatches. Specifications
GOST 25310-94: Covers of skylights. Specifications
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 26314-84: Stationary ship's ladders. Specifications
GOST 26314-98: Stationary ship's ladders. Specifications
GOST 26346-84: Lighting buses for the ac voltage up to 660 v
GOST 26429-2018: Steel structures of suspended transport tracks. Specifications
GOST 26429-85: Steel structures of suspended transport tracks. Specifications
GOST 26756-2016: Furniture for trade enterprises. General technical conditions
GOST 26756-85: Furniture for trade enterprises. General specifications
GOST 27204-87: Steel moulds for reinforced concrete members. Sides. Construction and dimensions
GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications
GOST 28408-89: Manual hoists and trolleys. General specifications
GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design
GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods
GOST 30765-2001: Metal transport packagings. General specifications
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 31173-2003: Steel doors. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31522-2012: Food processing machinery. Dough and pastry brakes. Specifications
GOST 31523-2012: Food processing machinery. Dough mixers. Specifications
GOST 31524-2012: Food processing machinery. Moulders. Specifications
GOST 31526-2012: Food processing machinery. Circular saw machines. Specifications
GOST 31527-2012: Food processing machinery. Intermediate provers. Specifications
GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing
GOST 31832-2012: Well sucker rod pump drives. General technical requirements
GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods
GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications
GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34282-2017: Armor protection of cars. General technical requirements
GOST 34329-2017: Formworks. General specifications
GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications
GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements
GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications
GOST 5465-75: Ball joints for floating and soil pressure pipelines
GOST 6247-79: Steel welded barrels with rolling hoops on the shell
GOST 6899-75: Manual hoists and trolleys. General specifications
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7496-84: Beet harvesters
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 7890-93: Travelling single girder suspended cranes. Specifications
GOST 9062-89: Chaplets for iron and steel castings.
GOST 9078-84: Flat pallets
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9570-84: Box and post pallets
GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements
GOST R 50059-92: Travelling single-girder suspended cranes. Specifications
GOST R 50608-93: Refrigerating equipment. Steel apparatus. Welded joints. Technical requirements and checking methods
GOST R 50963-96: Armour protection cars. General technical requirements
GOST R 51110-97: Equipment for bank protection. General technical requirements
GOST R 51177-2017: Overhead line hardware. General technical requirements
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 51559-2022: Power oil transformers of 110 and 220 kV voltage classes and autotransformers of 27,5 kV voltage class for AC traction railway power supply systems. General specifications
GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements
GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing
GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing
GOST R 51763-2001: Well sucker rod pump drives. General technical requirements
GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods
GOST R 52085-2003: Formworks. General specifications
GOST R 52153-2003: Radiation-protective boxes. General specifications
GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions
GOST R 52212-2004: Shooting-galleries. Armoured protection and technical resistance to burglary. General technical requirements
GOST R 52400-2005: Air reservoirs for railway brakes. General specifications
GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods
GOST R 52664-2006: Welded pipe sheet piles. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods
GOST R 53140-2008: Food processing machinery. Intermediate provers. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53473-2009: Food processing machinery. Moulders Specifications
GOST R 53475-2009: Food processing machinery. Circular saw machines. Specifications
GOST R 53477-2009: Food processing machinery. Dough and pastry brakes. Specifications
GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications
GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55525-2013: Storage systems. Adjustable pallet racking. General specification
GOST R 55525-2017: Storage systems. Adjustable pallet racking. General specifications
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 56367-2015: Safes and steel cabinets for storage of civilian weapons and ammunition. General specifications
GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
GOST R 56622-2015: Removable insulating towers for operation on the railway contact network. Specifications
GOST R 57381-2017: Storage systems. Hand loaded steel static shelving. General specifications
GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
GOST R 58037-2017: Safe boxes. Specifications
GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications
GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications
GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications
GOST R 58174-2018: Basket trolleys. Specifications
GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements
GOST R 58362-2019: The main pipeline transport of oil and oil products. Automation and telemechanization of technological equipment. Key Points, Terms and Definitions
GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications
GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications
GOST R 58654-2019: Automobile roads for general use. Spiral corrugated metal pipes. Specifications
GOST R 58684-2019: Fireproof ship doors. General specifications
GOST R 58721-2019: Welded joints from steel grades 10ГН2МФА, 15Х2НМФА of equipment parts and pipelines of nuclear power plants. Requirements for welding, surfacing and heat treatment
GOST R 58863-2020: Production tables. Metal workbenches. General specifications
GOST R 58864-2020: Tool cabinets made of metal. General specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications
GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
L8-138.000 - L8-200.000: Supports and suspensions of fixed pipelines with the parameters of the medium RR <= 2.2 MPa (22 kgf / cm2) and ter. <= 425 degrees Celsius of TPP, nuclear power plant and dust and gas pipelines of TPP from unified parts. Part 2. Supports movable and fixed
Letter 18878-IK/03: About the typo in GOST 14771-76
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
MDK 4-04.2002: Model Guidelines for Operation of Hot Water Storage Tanks in Public Piped Heat Supply Systems
MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
OST 102-55-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf
OST 108.030.30-79: Stationary structural steel boilers. General specifications.
OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.
OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.
OST 153-34.0-970-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Sleeve for passage through the ceiling. Design and dimensions
OST 153-34.0-970-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 2,5 MPa. The plug for passage through the ceiling. Design and dimensions.
OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions
OST 153-34.0-972-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 1.6 MPa (16 kgf/cm2). Support welded sliding, directing and motionless. Design and dimensions
OST 153-34.0-972-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 1,6 MPa. The support is welded and sliding, guide rail and fixed. Design and dimensions.
OST 153-34.0-973-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Welded sliding bearing, guide and fixed. Design and dimensions
OST 153-34.0-973-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 2,5 MPa. Sliding support is welded guide rail and the fixed. Design and dimensions.
OST 153-34.0-974-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Support clamp sliding, guide and fixed. Design and dimensions
OST 153-34.0-976-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Shells welded sliding supports, guides and fixed. Design and dimensions
OST 153-34.0-976-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure no more than 2,5 MPa. The holder of the welded and sliding, guide rail and fixed supports. Design and dimensions.
OST 153-34.0-977-99A: Assembly units and support parts for station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Plates guides. Design and dimensions
OST 153-34.0-977-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The guide rail plates. Design and dimensions.
OST 153-34.0-978-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Housings for clamp clamping, guides and fixed. Design and dimensions
OST 153-34.0-978-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The holders of the saddles, sliding, guide rails and fixed supports. Design and dimensions.
OST 153-34.0-979-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Half holders and gaskets. Design and dimensions
OST 153-34.0-979-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Semi-saddles and laying. Design and dimensions.
OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 24.940.02: Seams of welded connections. Weight per meter of weld of metal seam
OST 24.940.09-74: Welded joint seams. Main types and design elements.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.
OST 26-04-1037-74: Holders and fasteners of cold pipes to each other. Construction and dimensions.
OST 26-04-1216-75: Cryogenic pipelines. Parts of disk supports. Design and dimensions.
OST 26-04-2388-79: Welding by melting of the steels. Welded connections. Types, constructive elements and dimensions.
OST 26-04-2563-79: Labour safety standard system. Cryogenic product equipment. Protection against static electricity. General safety requirements.
OST 26-2091-93: Horizontal support vessels and equipment. Design.
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-570-93: Axial two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-571-93: Axial three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-572-93: Axial four-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-574-93: Corner two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-575-93: Corner three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-576-93: Corner four-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-577-93: Angular, single-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions
OST 34-10-578-93: Angular, double-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions
OST 34-10-579-93: Angular, three-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions
OST 34-10-580-93: Angular, four-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions
OST 34-10-743-93: Spring unit. Design and dimensions.
OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.
OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-58-81: Steel building structures. Welding. Basic requirements.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 36-62-81: Hoisting equipment. General technical requirements.
OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PGVU 021-92: Unified dust and air duct elements. Welded assemblies of blocks and elements of ducts of dust and gas air ducts of thermal power plants. Design and dimensions
PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts
PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts
PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts
PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts
PGVU 246-92: Compensator, rectangular single lens for gas and air ducts
PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts
PGVU 248-92: Three-slip rectangular compensator for gas and air ducts
PGVU 249-92: Four-sided rectangular compensator for gas and air ducts
PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 22-207-88: Lifting machines. General requirements and production standards
RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions
RD 24.031.17-88: Methodological instructions. Type selection and methods of calculation of I-beams and channels welded joints of s of stationary steam boilers steelworks.
RD 24.090.97-98: Materials handling equipment. Requirements for construction, repair and reconstruction of steel structures of cranes.
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance
RD 26-02-77-88: Columnar devices. Installation of plates. Technology, equipment, accessories
RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.10.130-96: Instructions for visual and measuring control.
RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities
RD 34.17.203-76: Technological guidelines for the use of mechanized methods of welding with flux-cored wires in the manufacture and installation of steel structures and non-standard equipment in the construction of thermal power plants
RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water
RD 34.27.202: Guidelines for Installation of Electric Filters Type UG
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 5.0679-91: Certification of welders and gas cutters. rules
RD 50-551-85: Guidelines. Calculations and tests of strength. Calculated and experimental methods for assessing the fatigue resistance of welded joints
RD EO 1.1.2.25.0286-2014: Nomenclature of groups of the same type of pile connections and overlays of equipment and pipelines of the NPP systems with the VVER-440, VVER-1000 and RBMK-1000 RP. Requirements
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD RTM 0352-76-81: Methods of welding in the manufacture of vessels and apparatus
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RST RSFSR 45-86: Sledge for children. Technical conditions
RST RSFSR 655-81: Ice screws fishing. General technical conditions
RST RSFSR 698-83: Ovens made of sheet steel. Technical conditions
RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design
RTM 36.15-89: Integrated Labor Rates for Fabrication of Steel Structures for Upright Cylindrical Tanks
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.
SP 16.13330.2011: Steel structures
SP 294.1325800.2017: The construction of steel. Design rules
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 46.13330.2012: Bridges and pipes
SP 470.1325800.2019: Steel structures. Work Rules
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 53-102-2004: General rules for steel structure design
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TR 88-98: Technical recommendations on the installation technology of polymer concrete pipes for microtunnel laying of sewers with an internal diameter of 300-1200 mm
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-314-81: Boxing unified for production and auxiliary buildings of land objects of the oil and gas industry
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 35-1385-81: Span metal railway buildings with riding on top 18.2 - 33.6 m
TU 36.1395905-016-96: Three-layer frame panels with steel facings and mineral wool insulation
TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
TU 3680-001-04698606-04: Pipe Support
TU 5210-001-25432924-2008: Fences, road, metal, barrier type
TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type
TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions
TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided
TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal
TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions
VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges
VSN 191-79: Guidelines for Machine Oxygen Cutting of Rolled Carbon and Low-Alloy Steel for Bridge Structures
VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1
VSN 41.88: Design of ice-resistant stationary platforms
VSN 416-81: General Specified Quantity Allowances for Building Materials. Compendium 30: Welding Operations
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.