GOST 19007-73
ГОСТ 19007-73
|
|
Paintwork materials. Method for determination of drying time and degree
Материалы лакокрасочные. Метод определения времени и степени высыхания
Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 3129 of 07.21.87.
The standard applies to paints and varnishes and establishes a method for determining the time and degree of drying of paints and varnishes.
Стандарт распространяется на лакокрасочные материалы и устанавливает метод определения времени и степень высыхания лакокрасочных пленок.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
7/20/1973
SKU: RUSS21396
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
Standards for pipe fittings (TPA) »
10. Production »
10.7 Coatings »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L19 Test methods. Packaging. Marking »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
Paints and varnishes »
The Document is Replaced With:
GOST 19007-2023: Paint and varnish materials. Method for determination of drying time and degree of drying
The Document References:
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 28498-90: Liquid-in-glass thermometers
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9095-89: Printing paper. Specification
GOST 9980.2-86: Paint materials. Test sampling
The Document is Referenced By:
GOST 10144-74: Enamels ХV-124 and ХV-125. Specification
GOST 10144-89: Enamels XB-124Specifications
GOST 10277-90: Putties. Specifications
GOST 10503-71: Oil paints, ready for use. Specifications
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12294-66: Electrical insulating impregnation varnish ФЛ-98. Specifications
GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 1347-77: Varnish БТ-783. Specifications
GOST 14147-80: Varnish ФЛ-559. Specifications
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15030-78: Varnish KФ-965. Specifications
GOST 15081-78: Silico-organic thermostable varnish KO-08. Specifications
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 1709-75: Coal-tar vanishes. Specifications
GOST 18099-78: Enamels ML-152. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 18856-81: Apparatuses for inhalation anesthesia and artificial pulmonary ventilation
GOST 19024-79: Enamels AC-182. Specifications
GOST 190-78: Drying oil
GOST 19214-80: Water dispersion paints for interior works. Specifications
GOST 19720-74: Details and work pieces made of wood and woody materials. Method for determination of resistance of varnish-and-paint coatings to the action of various temperatures
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20811-75: Paintwork materials. Methods for coating abrasion test
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 20833-75: Water-dispersion paints for exterior works. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22224-83: Hand flat spring dynamometers. Specifications
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22419-77: Universal platforms for railroad with gauge of 750 mm. Specification
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22564-77: Enamels KO-84 and KO-859. Specifications
GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications
GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23123-78: Silvery enamel KO-83. Specifications
GOST 23143-78: Enamels ЭП-773. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23171-78: Enamel AK-512. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 2346-78: Enamel BT-123. Specification
GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-2022: Enamels EP-140. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25129-82: Primer GF-031. Specifications
GOST 25148-82: Stationary dental units
GOST 25366-82: Enamel ЭП-5116. Specifications
GOST 25515-82: Enamels НЦ-256. Specifications
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 26080-84: Mould fungi protection of radio electronic equipment and electronic technique articles. General requirements
GOST 26141-84: Amplifiers of x-ray images for medical roentgen apparatuses
GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses
GOST 27037-86: Paint materials. Method of determination of stability to temperature changes
GOST 28131-89: Dentist` s chairs
GOST 28196-89: Water-dispersion paints
GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications
GOST 28603-90: Devices for uhf-therapy
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 28703-90: Automatic and semi-automatic instruments for indirect measurement of arterial pressure
GOST 29318-92: Paints and varnishes. Evaluation of compatibility of a product with a surface to be painted. Methods of test
GOST 30884-2003: Ready-mixed oil paints. General specifications
GOST 31093-2003: Paints and varnishes for furniture. General specifications
GOST 312-79: Varnish БТ-5100. Specifications
GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32389-2013: Boiled oils. General specifications
GOST 32753-2014: General use highways. Colored Anti-skid surface. Technical requirements
GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing
GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods
GOST 33290-2015: Paint materials used in building. General specifications
GOST 33354-2015: Paint materials being in contact with food products. General specifications
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications
GOST 482-77: Zink oxide oil paste. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications
GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 64-77: Enamels ГФ-230 BЭ. Specifications
GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications
GOST 6586-77: Black paste (oil base) MA-015. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 6993-79: Enamels HV-1100. Specification
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 7930-73: Enamels НЦ-1125. Specifications
GOST 7931-76: Natural drying oil
GOST 8017-74: Lacquer БT-99. Specifications
GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications
GOST 8292-85: Oil and paste color paints
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing
GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests
GOST 9.408-86: Unified system of corrosion and ageing protection. Paint coatings. Accelerated corrosion test for resistance in storage conditions
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9151-75: Enamels of types ГФ-92. Specifications
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification
GOST 9640-75: Enamels ЭП-51
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST R 51037-97: Protective polymer coatings for insulation, localization, localization dust suppression and deactivation. General technical requirements
GOST R 51102-97: Decontaminable protective polymeric coatings. General technical requirements
GOST R 51256-99: Traffic control devices. Road markings. Types and basic parameters. General technical requirements
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 51691-2008: Paint materials. Enamels. General specifications
GOST R 51692-2000: Boiled oils. General specifications
GOST R 51693-2000: Anticorrosion primers. General specifications
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 52165-2003: Paint materials. Varnishes. General specifications
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 52576-2006: General use highways. Road marking materials. Test methods
GOST R 53202-2008: Paint materials being in contact with food products. General specifications
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 55818-2013: Polymer base decorative coats for facade’s thermal insulation composite systems with external mortar's lays. Specifications
GOST R 55818-2018: Polymer base decorative coats for faсade’s thermo-insulation composite systems with external mortar’s lays. Specifications
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 59952-2021: Paint and varnish materials. Technical specifications. General requirements for design and execution
GOST R 70087-2022: Water-dispersion paints for facade thermal insulation composite systems with exterior plaster layers. Technical specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
MVN 7/2002: Temporary regulatory and technical requirements for horizontal road marking of public roads, urban and rural roads and streets managed by the UAV "Mosavtodor"
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.3.029-2013: Recommendations for the use of colored anti-skid coatings
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
ODM 218.3.073-2016: Recommendations for the use of impregnating compositions to improve the durability of asphalt concrete pavements
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs
PNST 408-2020: Green standards. Nanomodified paint and varnish materials with antibacterial effect. Criteria and indicators for confirming the conformity of "green" products
PNST 66-2015: Nanomodified antibacterial acrylic paint. Specifications
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.
RD 34.20.325: Procedural Guidelines for Bench Tests of Anticorrosion Coatings for Underground Heat Distribution Lines
RD 39-0147103-328-86: Process Guidelines for Application of Polymer Protective Coatings on the Interior Surface of Field Water Pipes Used for Transport of a Medium Containing Sulfur (Up to 100 mg/liter)
RD 39-3-387-80: Guidelines on Selection and Application of Paints/Coatings and Coating Systems for Interior Insulation of Piping for Field Water Flooding Systems
RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels
RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings
SanPiN 1.2.681-97: Hygienic requirements for production and safety of perfumes and cosmetics
SP 86.13330.2014: Main (Trunk) pipelines
ST TsKBA 021-2004: Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings
TR 84-98: Technical recommendations for the application of finishing systems of paints and varnishes on exterior wall panels that are molded "face down"
TR 85-98: Technical recommendations on input quality control of materials used for facade finishing
TR 89-99: Technical recommendations for the manufacture and use of building paints and varnishes from the Inteko system for factory and construction conditions
TR 94.11-05: Technological regulation of the operational quality control of construction, installation and special works during the construction of buildings and structures. 11. Painting and wallpaper production
TR 94.11-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 11: Painting and Wallpapering
TSN 66-301-99: Requirements for Paints and Coatings Used in Construction Practices in the Moscow Region
TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation
TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)
TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials
TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue
TU 2310-001-83568382-2008: Composition for the treatment of concrete surfaces "Monolith-20M"
TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions
TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 6-02-I-015-89: Silicone adhesive sealant Elastosil 137-182 heat-conducting
TU 6-10-1052-75: Enamel VL-515 red-brown
TU 6-10-1117-85: Primer EP-057 Protector
TU 6-10-1270-87: Varnish BT-5101
TU 6-10-1539-76: EP-572 Enamel of various colors
TU 6-10-741-79: PF-167 enamel of various colors
TU 6-10-778-76: Enamel FL-412 (former FL-723) FL-61 (former FL-724) silver
TU 6-10-866-85: Lucky VL-725, VL-725 G and enamel VL-725 aluminum
VRD 39-1.10-013-2000: Guidelines for the Use of Composite Materials Developed by Porseal Ltd (St. Petersburg) for Repair Purposes at Petroleum and Natural Gas Facilities (Includes "Analysis of Carrying Capacity of 530-1420-mm Pipelines Repaired with the Use of Composite Materi
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.