GOST 31842-2012
ГОСТ 31842-2012
|
|
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Нефтяная и газовая промышленность. Теплообменники кожухотрубчатые. Технические требования
Status: Effective - Introduced for the first time. IUS 11-2013
The standard establishes requirements for the design, materials, manufacturing, control, testing and preparation for shipment of steel shell-and-tube heat exchangers for use in the oil, petroleum, petrochemical, chemical, gas and other related industries. The standard is applicable to the following types of shell-and-tube steel heat exchangers: heat exchangers, condensers, refrigerators and evaporators operating at a design pressure of not more than 21 MPa, under vacuum with a residual pressure of not less than 665 Pa (5 mmHg). At a wall temperature of not less than minus 70 ° C. The standard does not apply to surface water vapor vacuum condensers and feed water heaters.
Стандарт устанавливает требования к конструкции, материалам, изготовлению, контролю, испытаниям и подготовке к отгрузке стальных кожухотрубчатых теплообменных аппаратов, предназначенных для применения в нефтяной, нефтеперерабатывающей, нефтехимической, химической, газовой и других смежных отраслях промышленности. Стандарт применим к следующим типам аппаратов теплообменных кожухотрубчатых стальных: теплообменникам, конденсаторам, холодильникам и испарителям, работающим под расчетным давлением не более 21 МПа, под вакуумом с остаточным давлением не ниже 665 Па (5 мм рт. Ст.) при температуре стенки не ниже минус 70 °С. Стандарт не применим к поверхностным вакуумным конденсаторам водяного пара и нагревателям питательной воды.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/21/2012
SKU: RUSS21406
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.20 Equipment for oil and gas processing »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.20 Equipment for oil and gas processing »
The Document References:
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 28759.2-90: Steel flat welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.3-90: Steel butt welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.4-90: Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections. Design and dimensions
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 28759.6-90: Gaskets from nonmetallic materials.
GOST 28759.7-90: Asbestos-metal gaskets
GOST 28759.8-90: Metal gaskets of octagonal cross-section
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
The Document is Referenced By:
ATK-RE 2013: Shell-and-tube heat exchangers and pipe-in-tube heat exchangers manufactured according to TU 3612-005-00220302, TU 3644-006-00220302, TU 3612-017-00220302, TU 3612-013-00220302, TU 3612-014-00220302, TU 3612-013 023-00220302, TU 3612-024-00220302, TU 3612-100-00220302. Manual
ATK-RE 2015: Shell-and-tube heat exchangers and tube-in-tube heat exchangers. Manual
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST 34233.7-2017: Vessels and apparatus. Norms and methods of strength calculation. Heat exchangers
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Fastening parts for detachable connections of nuclear power plants. Specifications.
Language: English |
Environment. Water quality. Waste water to supply to the sewerage system. General requirements
Language: English |
Hot-rolled sheet. Range
Language: English |
Unified system for design documentation. Specifications
Language: English |
Electomagnetic compatibility of technical equipment. Railway systems and equipment. Part 3-1. Railway rolling stock. Requirements and test methods
Language: English |
The liquids for electronic nicotine delivery systems. General specifications
Language: English |
Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
Language: English |
Metals. Method for testing the impact strength at the low, room and high temperature
Language: English |
Carbon structural quality steel gauged bars with special surface finish. General specifications
Language: English |
Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
Language: English |
Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
Language: English |
Slotters. Standards of accuracy and rigidity
Language: English |
Crane rails. Specifications
Language: English |
Construction in seismic regions
Language: English |
Loads and impacts
Language: English |
Cocoa-powder. Specifications
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
