GOST 9012-59

ГОСТ 9012-59

Metals. Method of Brinell hardness measurement

Металлы. Метод измерения твердости по Бринеллю

Status: Effective - Introduced for the first time. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard establishes a method for measuring the Brinell hardness of metals and alloys with a hardness of not more than 650 units.

Стандарт устанавливает метод измерения твердости по Бринеллю металлов и сплавов с твердостью не более 650 единиц.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 44

Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR, 2/4/1959

SKU: RUSS21419

Price: $195.03




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 002/2011 TR TS. On safety of high-speed rail » Regulations and standards (to TR CU 002/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »


As a Replacement Of:

OST 10241-40: Metals. Test methods. Brinell Hardness Test

The Document References:

GOST 23677-79: Hardness meters for metals

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3722-81: Rolling bearings. Balls. Technical requirements

The Document is Referenced By:

DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants

FTS ZhT TsT 020-99: Federal certification requirements for rail transport. Technical rules. Brake disks of railcar rolling stock. Certification requirements

FTS ZhT TsT-TsV-TsL 018-99: Mechanical components of brakes of railway cars. Certification requirements

FTS ZhT TsT-TsV-TsL 062-2000: Rolling stock of railways. Springs cylindrical screw. Certification requirements

GOST 10025-2016: Tin-phosphor bronze rods. Specifications

GOST 10025-78: Tin-phosphor bronze rods. Specifications

GOST 10461-81: Shake-proof washers with teeth. General specifications

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 1051-73: Calibrated quality steel

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10702-63: Steel for cold setting. Grades and technical requirements

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10791-89: Solid rolled wheels

GOST 10851-94: Friction articles manufactured from retinax

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 11042-90: Construction steel hammers. Specifications

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11291-81: Carbide and hss tipped woodcutting disk grooving cutters

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11713-78: Tractor and combine diesels. Flywheels. General technical conditions

GOST 11996-79: Batch-type mixers for rubber. General specifications

GOST 1203-75: The key of the brake shoe for cars of the railways with broad gauge 1520 mm. Specifications

GOST 1208-2014: Pressed bronze tubes. Specifications

GOST 1208-73: Pressed bronze tubes

GOST 1208-90: Pressed bronze tubes

GOST 1215-79: Malleable iron castings

GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications

GOST 12253-88: Clips for the ball-and-socket joints of line accessories and insulators

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13585-68: Steel. The bead method for determining the allowed welding and building procedures.

GOST 13877-80: Sucker rods and couplings

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 13932-80: Combined arbor-type circular mills for woodcutting

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 1435-74: Non-alloyed tool steel. Specification

GOST 1435-90: Unalloyed tool steel bars, strips and coils

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 1452-69: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Technical requirements

GOST 1452-86: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1535-2006: Copper rods. Specifications

GOST 1535-2016: Copper rods. Specifications

GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 15835-2013: Beryllium bronze bars. Specifications

GOST 15835-70: Beryllium bronze bars. Specifications

GOST 1583-89: Aluminium casting alloys. Specifications

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 15891-70: Hot-rolled fashioned strip two layered steel for plough-shares. Specifications

GOST 16118-70: Cylindrical helical compression (extension) springs made of round steel. Specifications

GOST 16277-93: Plates of separate fastening for railway rails of types p50, p65 and p75

GOST 1628-78: Bronze rods. Specifications

GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 1759.5-87: Nuts. Mechanical properties and test methods

GOST 1759-70: Bolts, screws, pins and nuts

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18126-72: Bolts, studs and nuts with thread diameter over 48 mm. Specifications

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18267-82: Railway rails, types р50, р65, and р75 for wide-gage railways, heat-treated by through hardening in oil

GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications

GOST 18578-89: Builders axes. Specifications

GOST 18661-73: Steel. Method for measurement of hardness by shock indentation

GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19265-73: Bars and strips out of high-speed steel. Specifications

GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel

GOST 19657-84: Magnesium alloy pressed profiles. Specifications

GOST 20072-74: Heat-resistant steel

GOST 20223-74: Spray guns for pneumatic spraying. General specifications

GOST 2060-2006: Brass rods. Specifications

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21022-75: Chromic steel for precise bearings. Specifications

GOST 21053-75: Pipes, cast iron, under pressure with a butt joint for rubber sealing cuffs

GOST 2105-75: Forged and swaged hooks. Technical requirements

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 21437-95: Zinc antifriction alloys. Marks, technical requirements and test methods

GOST 21546-88: Hammer dies for die forging

GOST 2176-77: High-alloy steel castings with special qualities. General specifications

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications

GOST 22356-77: High strength bolts and nuts аnd washes. General specifications

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 23270-89: Tube-billets for machining

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23677-79: Hardness meters for metals

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 23979-2018: Subs for casing and tubing. Specifications

GOST 23997-80: Nozzles for pressure gauges. Technical requirements

GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications

GOST 24301-80: Bronze and brass cast bars and tubes. Technical conditions

GOST 24301-93: Bronze and brass cast bars and tubes. Specifications

GOST 24648-90: Pig iron for castings. Sampling and making the specimen for mechanical testing.

GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 25140-93: Zinc alloys for casting. Grades

GOST 25556-82: Set screws. Mechanical properties and test methods

GOST 25573-82: Freight handling rope slings for construction

GOST 25698-83: Powder articles. Methods of determination of hardness

GOST 25698-98: Sintered metal materials, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness

GOST 26007-83: Strength calculations and tests. Methods of mechanical testing of metals

GOST 26131-84: Heat-resisting steel forgings. General specifications

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 27217-2012: Soils. Field method for determining of frost-heave specific tangential forces

GOST 2744-79: Line accessories. Acceptance rules and methods of tests

GOST 27834-95: Tool joints for drill pipes. Specifications

GOST 27962-88: Industrial equipment

GOST 28186-89: Brake shoes for motor car of rolling stock. Specifications

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28378-89: Iron-based powder structural materials. Types

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 28648-90: Crane wheels

GOST 28813-90: Plain bearings. Metallic multilayer materials for thin-walled plain bearings

GOST 29202-91: Plain bearings. Hardness testing of bearing metals. Solid materials

GOST 29212-91: Plain bearings. Hardness testing of bearing metals. Compound materials

GOST 30249-97: Cast iron brake blocks for locomotives. Specifications

GOST 30311-96: Sponge titanium. Method for determination of Brinell hardness

GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method

GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications

GOST 307.1-95: Electric irons for every day use

GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods

GOST 30768-2001: Control head oil field equipment. Test methods

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 307-81: Domestic electric irons

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 31.1066.03-97: Central arbors for exact operations

GOST 31.1066.04-97: Attachments for metal-cutting tools. Cam arbors. General specifications

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32409-2013: Spring anchors to railway rails. Technical specification

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification

GOST 32696-2014: Steel drill pipes for oil and gas industry. Specifications.

GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications

GOST 33184-2014: Joint bars for rails of gauge railway. Specifications

GOST 33189-2014: Transmission tooth gears of the traction railway stock. Scales of standards of macro- and microstructures

GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 33532-2015: Saws frame and tare with cutting elements, welded with stellate, for vertical sawmills. Specification

GOST 33721-2016: Head sets of electric drives, external contactors for switches. Safety requirements and methods of checking

GOST 33722-2016: Switches of turnouts. General specifications

GOST 33724.1-2016: Pneumatic brake equipment of the railway rolling stock. Safety Requirements and Inspection Procedures. Part 1. Air distributors, brake valves, brake units, sealing rubber components

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 33986-2016: Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications

GOST 34387-2018: Side bearings of the freight wagon bogies. General specifications

GOST 34468-2018: Pyatniki freight cars of 1520 mm gauge railways. General technical conditions

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 398-2010: Rough tyres for railway rolling stock. Specifications

GOST 398-81: Carbon steel tires for rolling stock for broad gauge railways. Technical requirements

GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock

GOST 4.79-87: Product-quality index system. Friction products for brake assemblies. Nomenclature of indices

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4041-48: Hot-rolled thick-gauge high-quality carbon steel for automobile construction

GOST 4041-71: Rolled plates of high quality structural steel for cold stamping

GOST 4121-62: Crane rails

GOST 4121-76: Crane rails. Specifications

GOST 4121-96: Crane rails. Specifications

GOST 4133-73: Fishplates for wide gauge railway track

GOST 4134-2015: Copper alloys sections for collectors of electrical machines. Specifications

GOST 4134-75: Copper alloys sections for collectors of electrical machines. Specifications

GOST 434-53: Wire of rectangular cross-section, tape and bus of copper for electrical purposes

GOST 434-71: Wire of rectangular cross-section, tape and bus of copper for electrical purposes

GOST 434-78: Wire with rectangular cross-section and copper busbar wire for electrotechnical purposes

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4751-73: Screw rings. Specifications

GOST 493-54: Non-tin bronze. Types

GOST 5006-83: Toothed clutches. Specifications

GOST 5090-2016: Hardware devices for wooden windows and doors. Specification

GOST 5257-89: Rough carbon steel tires for tramway rolling stock

GOST 5257-98: Rough carbon steel tyres for tramway rolling stock. Specifications

GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5524-75: Saws for vertical gang mills

GOST 5525-61: Pipes of cast-iron, for pressure, manufactured by stationary casting in sand molds, and connecting parts

GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds

GOST 5641-66: Prisms for testing and marking

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5761-74: Valves for nominal pressure

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications

GOST 5876-82: Types P18 and P24 narrow-gauge railway rails

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications

GOST 5950-51: Alloy tool steel. Specification

GOST 5950-73: Bars and strips from a toolhouse steel alloy

GOST 613-79: Tin foundry bronzes. Grades

GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications

GOST 6939-85: Marsh and bush-and-bog plaws

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7360-2015: Drill-stem subs. Technical specification

GOST 7360-82: Subs for drilling strings

GOST 7370-2015: Railway frogs. Specifications

GOST 7524-2015: Steel grinding balls for ball mills. Specifications.

GOST 7524-89: Steel grinding balls for the ball mills

GOST 7769-82: Alloyed cast iron for castings with special properties

GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications

GOST 8.335-2004: State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification

GOST 8.335-78: State system for ensuring the uniformity of measurements. Harness standard blocks. Methods and means of verification

GOST 8.398-80: State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification

GOST 800-78: Bearing tubes. Technical requirements

GOST 801-78: Bearing steel. Specifications

GOST 8026-92: Levelling rules. Specifications

GOST 8319.0-75: Hot-rolled steel periodical lengthwise-rolled profiles. Specifications

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 9031-75: Reference hardness standards

GOST 9131-75: Safety valves lever-load flanged cast iron for Pd 1.6 MPa (16 kgf / cm2) and steel for Pd 2,5 MPa (25 kgf / cm2). Technical requirements

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting

GOST 9650-80: Pins. Specifications

GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)

GOST 980-80: Flat ring saws for wood sawing

GOST 9853.8-79: Sponge titanium. Method for the determination of Brinell hardness

GOST ISO 10432-2014: Oil and gas industry. Downhole equipment. The downhole safety valve with accessories. General specifications

GOST ISO 11439-2014: Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications

GOST ISO 16070-2015: Oil and gas industry. Downhole equipment. Mounting mandrels and landing nipples. General technical requirements

GOST ISO 17078-1-2014: Oil and gas industry. Drilling and production equipment. Part 1. Mandrels for the removable valve. General specifications

GOST ISO 2531-2012: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications

GOST ISO 3183-2012: Steel pipes for pipelines of petroleum and natural gas industries. General specifications

GOST ISO 3183-2015: Steel pipes for pipelines of petroleum and natural gas industries. General specifications

GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs

GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts

GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch

GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes

GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure

GOST R 50271-92: Prevailing torque type steel hexagon nuts. Mechanical and performance properties

GOST R 50426-92: Zinc alloys for casting. Grades

GOST R 50864-96: Tool-joint tapered thread for drill string elements. Profile, dimensions, technical requirements

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51045-2014: Rails of ways technological railways transport. General specifications

GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications

GOST R 51155-2017: Line accessories. Acceptance rules and test methods

GOST R 51155-98: Line accessories. Acceptance rules and methods of tests

GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51178-98: Clips for ball-socket couplings of line hardware and insulators. Specifications

GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications

GOST R 51321.5-2011: Low-voltage switchgear and control gear assemblies. Part 5. Particular requirements for low-voltage assemblies for power distribution in public networks (distribution cabinets and boards)

GOST R 51321.5-99: Low-voltage switchgear and control gear assemblies. Part 5. Particular requirements for assemblies intended to be installed outdoors in public places. Cable distribution cabinets (CDCs) for power distribution in networks

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51685-2000: Railway rails. General specifications.

GOST R 51685-2013: Railway rails. General specifications.

GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications

GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications

GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

GOST R 52628-2006: Nuts. Mechanical properties and test methods

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests

GOST R 53558-2009: Motor vehicles. Aluminium pistons of engines. General technical requirements and test methods

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods

GOST R 53813-2010: Automobile engines. Connecting rods. Technical requirements and test methods

GOST R 53866-2010: Crane rails. Specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54383-2011: Steel drill pipes for petroleum and natural gas industries. Specifications

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55497-2013: Check railway rails. Specifications

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

GOST R 55820-2013: Switch and crossing rails. Specifications

GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements

GOST R 55877-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for determination of resistance to wear by abrasive wheels

GOST R 55941-2014: Grooved rails. Specifications

GOST R 55951-2014: Modified wood. Method for determining the wear resistance and friction coefficient

GOST R 56030-2014: Pipes for details of bearings. Technical specifications

GOST R 56232-2014: Determination of B«stress-strainB» diagram in the course of ball instrumental indentation. General requirements

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications

GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications

GOST R 57910-2017: Materials for additive process. Control and tests methods

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

GOST R 58195-2018: Internal combustion engines. Piston pins. Part 2. Inspection measuring principles

GOST R ISO 11439-2010: Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications

GOST R ISO 13533-2013: Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment. General technical requirements

GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements

GOST R ISO 22034-1-2013: Steel wire and wire products. Part 1. General test methods

GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties

GOST R ISO 2531-2008: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications

GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications

GOST R ISO 3183-2-2007: Steel pipes for pipelines. Specifications. Part 2. Requirements for class B pipes

GOST R ISO 3506-1-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs

GOST R ISO 3506-2-2009: Mechanical properties of corrosion-resistant stainless steel fasteners Part 2. Nuts

GOST R ISO 3506-3-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress

GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread

GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GOST R ISO 898-5-2009: Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses

MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications

NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.

NB ZhT TsSh 136-2003: Headsets electric drives for switches. Safety standards

NB ZhT TsT 023-2001: Shaft cardan main drive diesel locomotives and diesel trains. Safety standards

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.

OST 108.961.02-79: Carbon and alloy steel castings for components of stationary steam turbines with secured strength properties at high temperatures. Specifications.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 108.961.05-80: Billets of rotors and discs for stationary gas turbines and compressors. Technical conditions.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-01-152-82: Aluminium and Aluminium alloy forgings for chemical equipment. General specification.

OST 26-01-86-88: fixed metal seals for vessels and apparatus for pressure over 10 to 100 MPa (100 to 1000 kgf / cm2). Types. Design and dimensions. Technical requirements . Acceptance rules. Control methods.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-07-1114-74: Aluminium-alloy castings for pipeline valves and its drive arrangements.

OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).

OST 26-07-790-73: Devices for control of pipeline armature. General specifications.

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 302-07-1152-92: Cylindrical helical compression springs. General specifications.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 34 001-73: Lifting equipment. Requirements for materials

OST 34 002-73: Equipment and general-purpose machines. Requirements for materials

OST 34-13-910-86: Cargo rope slings for construction. Technical conditions

OST 35-02-72: High-strength bolts, nuts and washers for them.

OST 36-39-80: Steel technological pipelines made of carbon and alloy steels for pressure Ру up to 9.81 MPa (100 kgf / cm2). Shielded manual metal arc welding. Typical technological process.

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

OST 95-10-72: Billets made of corrosion-resistant steels of 12Х13, 20Х13, 30Х13, 40Х13, 95Х18, 14Х17Н2, 07Х16Н4Б and 07Х16Н4Б-Ш types.

PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNST 112-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method of sample preparation by rotary seal (Gyrator)

PNST 14-2012: Machine nanostructured springs. Specifications

R 50-54-36-88: Recommendations. Ensuring the durability of products. Method and instruments for measuring the wear of parts from materials based on modified wood

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 24-SZK-01-01: Freight slings for general use on a textile basis. Requirements for the device and safe operation

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 26-11-08-86: Welded Joints. Mechanical Tests

RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment

RD 302-07-20-93: Determination of steel mechanical properties by means of indenter pressing-in method.

RD 31.28.09-93: Ship bearing bushes with antifriction layer of tin and lead alloy. Technical requirements on materials. Typical technological processes.

RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants

RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing

SP 40-109-2006: Code of practice for design and installation of water and sewer systems with pipes made of high-strength ductile iron and nodular graphite

SS-05: Method for determining the penetration of shaped charges at atmospheric pressure and ambient temperature of the Federal Service for Environmental, Technological and Atomic Supervision (SS-05)

ST RK 1416-2005: Macro- and micro-structures of cog wheels of tractive transmissions of traction rolling stock. Evaluation scales and control procedure

ST RK 1643-2007: Freight cars cast iron brake shoes. Specification

ST RK 1677-2007: Resilient rail fasteners with resilient terminals of SKL 12 (with cushions) and SKL 14 (no cushions) types. Specification

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method

ST SSFZhT TsT-TsV-TsL 084-2000: Rolling stock of railways. Springs cylindrical screw carriages. Typical test method.

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

ST TsKBA 091-2011: Pipe fittings. Determination of mechanical properties of steel based on hardness measurement

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STB 1274-2001: Suspensions for road vehicles made of sheet metal. General specifications

TU 0921-057-01124328-98: New welded railway rails. Technical conditions

TU 0921-077-01124328-99: Old-fashioned repaired welded rails

TU 1317-233-0147016-02: Seamless hot-deformed oil and gas pipes of increased reliability during operation for the fields of OAO Tomskneft VNK

TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

TU 14-3R-62-2002: Seamless hot-deformed steel pipes made of 15X5M steel for the petroleum refining industry. Technical conditions

TU 14-4-87-72: High-strength thermally treated bolts and nuts with a diameter of M16 - M27 for building steel structures. Technical conditions

TU 1461-037-50254094-2004: High-strength cast iron pressure pipes. Technical conditions

TU 1461-062-50254094-2003: High-strength cast iron pressure pipes for the electrochemical protection of underground metal structures. Technical conditions

TU 1461-064-50254094-2003: High-strength cast iron pipes for storm sewer free-flow systems

TU 1-92-156-90: Forgings and forgings of carbon and alloy structural steel. Technical conditions

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1

VSN 51-3-85: Design of field steel pipelines

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

VSN 70-79: Guidelines for the Installation and Testing of Piping with Nominal Bore of up to 400 mm (inclusive) in Diameter Operating at Pressures over 9.8 MPa to 245 MPa (over 100 kgf per sq.m to 2500 kgf per sq.m)

GOST 1628-2019: Bars are bronze. Technical conditions

GOST 33421-2015: Composite and ceramic-metal brake shoes for railway rolling stock. General specifications

GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods

GOST 34497-2018: Steam turbine blades. Basic replacement requirements

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST 977-88: Steel castings. General specifications

GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure

GOST R 58377-2019: Alpine skiing and bindings. Mounting area. Technical requirements and test methods

GOST R 58401.13-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Rotary seal sample preparation method

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

GOST R 58518-2019: Steel construction hammers. Technical conditions

GOST R 58753-2019: Cargo rope slings for construction. Technical specifications

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 8.977-2019: State system for ensuring the uniformity of measurements. Standard hardness measures. Verification Method

GOST R IEC 61210-99: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements

I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

ODM 218.5.008-2019: Guidelines for the preparation of asphalt concrete samples with a rotary compactor (gyrator)

OST 32.156-2000: Spring bar terminals for fastening rails. Specifications (with Amendment No. 1)

PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels

R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes

R 4.054.103-89: Instrument parts are precision metal. Stabilization of sizes by heat treatment. Typical Processes

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials

RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements

RD 31.55.01.02-80: Spare parts for marine diesel engines of foreign construction. Bearing shells. Technical requirements

RD EO 0027-2005: Instructions for determining the mechanical properties of metal of equipment of nuclear power plants using gumless methods according to hardness characteristics

ST CKBA 125-2020: Pipe fittings. Types of control and testing

ST SSFZhT TsT 042-99: Certification system standard for the federal rail transport. Brake discs of engine carrying equipment applied for railways. Standard testing procedure.

ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TU 108.11.853-87: Procurement of parts from purchased long products

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!