GOST R 55495-2013
ГОСТ Р 55495-2013
|
|
Railway multiple units. Durability and dynamics requirements
Моторвагонный подвижной состав. Требования к прочности и динамическим качествам
Status: Not effective - Canceled. Information about the registration of 800-st dated July 4, 2016 (the official website of Rosstandart); IUS 12-2016
Railway multiple units. Durability and dynamics requirements
Железнодорожные несколько единиц. Требования к прочности и динамике
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/29/2013
SKU: RUSS21444
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
1 Basic requirements for quality of products and services »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D53 Electric rolling stock »
The Document References:
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 1497-84: Metals. Methods of tension test
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 18855-94: Rolling bearings. Dinamic load ratings and rating life
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 23207-78: Fatigue strength. Terms, definitions and symbols
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 25.101-83: Strength calculation and testing. Representation of random loading of machine elements and structures and statistical evaluation of results
GOST 25.502-79: Methods of mechanical testing of metals
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 26388-84: Welded joints. Test methods on resistance to cold crack formation under fusion welding
GOST 26389-84: Welded joints. Test methods on resistance to shrinkage crack formation under fusion welding
GOST 380-2005: Common quality carbon steel. Grades
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 6331-78: Industrial and medical liquid oxygen
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7871-75: Aluminum and aluminium alloy welding wire
GOST 8050-85: Carbon dioxide,
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9087-81: Welding melted fluxes
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 977-88: Steel castings. General specifications
GOST R 27.002-2009: Dependability in technics. Terms and definitions
GOST R 52944-2008: Live-cycle of railway rolling stock. Terms and definitions
The Document is Referenced By:
GOST 31666-2014: Diesel-multiple unit train. General technical requirements
GOST R 55496-2013: Motor railway rolling stock. Methodology of dynamic-strength tests
Letter 1681/05-SM: About the application of the standards
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.