|
SP 20.13330.2016
СП 20.13330.2016
|
|
Loads and actions
Нагрузки и воздействия
Status: Effective
This set of rules establishes requirements for the assignment of loads, impacts and their combinations, taken into account when calculating buildings and structures for the limiting conditions of the first and second groups, in accordance with the provisi
Настоящий свод правил устанавливает требования по назначению нагрузок, воздействий и их сочетаний, учитываемых при расчетах зданий и сооружений по предельным состояниям первой и второй групп, в соответствии с положениями ГОСТ 27751.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/3/2016
SKU: RUSS220714
|
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.01 Structures of buildings in general »
As a Replacement Of:
SP 20.13330.2011: Loads and impacts
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
GOST 27751-2014: Reliability for constructions and foundations. General principles
SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings
SP 131.13330.2012: Building climatology
SP 20.13330.2011: Loads and impacts
SP 296.1325800.2017: Buildings and structures. Accidental actions
Federal Law 184-FZ: About technical regulation
The Document is Referenced By:
GOST 34329-2017: Formworks. General specifications
GOST R 57818-2017: Design standards of buildings and constructions for gas processing industry
GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards
GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements
GOST R 58283-2018: Oil and gas industry. Arctic operations. Accounting for ice loads in the design of offshore platforms
GOST R 58322-2018: Contact network for high-speed rail lines. Technical requirements and control methods
ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
SP 107.13330.2012: Greenhouses and hotbeds
SP 109.13330.2012: Cold storage units
SP 119.13330.2017: Railways with 1520 mm track
SP 123.13330.2012: Underground storages of natural gas, oil and processing product
SP 126.13330.2017: Geodetic works in building
SP 14.13330.2018: Seismic building design code
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2017: Steel structures
SP 17.13330.2017: The roofs
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 24.13330.2011: Pile foundations
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 294.1325800.2017: The construction of steel. Design rules
SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules
SP 296.1325800.2017: Buildings and structures. Accidental actions
SP 307.1325800.2017: Buildings and premises for the storage and processing of agricultural products the rules of operation
SP 309.1325800.2017: Buildings of theaters and entertainment. Regulations of design
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 320.1325800.2017: Polygons for solid communal waste. Projecting, operation and reclamation
SP 327.1325800.2017: Exterior masonry walls with brick veneer. Rules of design, operation and repair
SP 332.1325800.2017: Sport constructions. Rules of design
SP 339.1325800.2017: Designs from cellular concrete. Rules of design
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 359.1325800.2017: Vertical cylindrical steel silos for bulk products storaging. Design rules
SP 360.1325800.2017: Steel fiber reinforced concrete structures. Design rules
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 362.1325800.2017: Fencing structures made of sandwich panels. Design rules
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 370.1325800.2017: Solar Shading Devices in Buildings. Design rules
SP 371.1325800.2017: Formwork. Design rules
SP 374.1325800.2018: Buildings and premises for the storage and processing of agricultural products. Accidental actions
SP 375.1325800.2017: Industrial chimneys. Design rules
SP 378.1325800.2017: Offshore pipelines. Design and construction rules
SP 379.1325800.2018: Buildings of dormitory and hostels. Rules of design
SP 381.1325800.2018: Retaining structures. Design rules
SP 383.1325800.2018: Facilities for sports and health. Desing rules
SP 384.1325800.2018: Tent structures. Design rules
SP 385.1325800.2018: Protection of buildings and structures against progressive collapse. Design code. Basic statements
SP 386.1325800.2018: Light transparent polycarbonate structures. Design rules
SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements
SP 43.13330.2012: Structures for industrial installations
SP 55.13330.2016: Detached houses
SP 56.13330.2011: Industrial buildings
SP 60.13330.2016: Heating, ventilation and air conditioning
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 64.13330.2017: Timber structures
SP 71.13330.2017: Insulation and finish coatings
SP 88.13330.2014: The protective shelters of civil defense
ST RK 2068-2010: Motor roads of public use. General requirements General requirements
GOST R 53301-2019: Valves for fire ventilation systems. Fire test method
GOST R 56439-2019: Set of frame tent awning for sports fields. General requirements
GOST R 58359-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Technical specifications
GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications
GOST R 58622-2019: The main pipeline transport of oil and oil products. Methodology for assessing the strength, stability and durability of a vertical steel tank
GOST R 58757-2019: Fiberglass products for the installation of decorative and facing elements of building facades. Technical specifications
GOST R 58768-2019: Plastic anchors for fastening in concrete and masonry. Test methods
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 58875-2020: Green standards. Greened and maintained roofs of buildings and structures. Technical and environmental requirements
GOST R 58883-2020: Hinged facade ventilated systems. General rules for calculating substructures
GOST R 58900-2020: Bent steel sheet profiles with trapezoidal corrugations for construction. Load-bearing test method
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
Methodical manual: Building Design for Refrigerators
MRR 6.4-17: Requirements for ensuring the safe operation of capital construction facilities
ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction
ODM 218.2.098-2018: Guidelines for the use of a prestressed homogeneous system for strengthening slopes based on a high-strength steel network (more than 1770 N
ODM 218.2.103-2020: Guidelines for the use of expanded polystyrene in the design, construction and reconstruction of lightweight embankments on soft soils
ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads
RB-022-01: Recommendations to Assessment of Tornado Characteristics in Respect to Nuclear Facilities
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
SP 152.1325800.2018: Buildings of federal courts. Design rules
SP 335.1325800.2017: Large-panel construction system. Design rules
SP 337.1325800.2017: Composite precast and in-situ reinforced concrete construction. Design rules
SP 338.1325800.2018: High-speed railways noise protection. Design and construction regulations
SP 342.1325800.2017: Protection of railway track and structures from the adverse natural phenomena. Rules of engineering and construction
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 345.1325800.2017: Residential and public buildings. Thermal performance design
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design
SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
SP 38.13330.2018: Loads and impacts on hydraulic structures (wave, ice and from ships)
SP 397.1325800.2018: Buildings and facilities of equestrian complexes. Design rules
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 403.1325800.2018: Industrial territories. Rules for the design of landscaping
SP 414.1325800.2018: Fixed formwork. Design rules
SP 417.1325800.2018: Buildings of railway stations. Design rules
SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules
SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules
SP 430.1325800.2018: Monolithic structural systems. Design rules
SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules
SP 436.1325800.2018: Engineering protection of territories, buildings and structures from landslides and landslides. Design rules
SP 441.1325800.2019: Protection of buildings against vibration generated by rail. Design rules
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
SP 451.1325800.2019: Public buildings with the use of wooden structures. Design rules
SP 452.1325800.2019: Residential multi-apartment buildings with the use of wooden structures. Design rules
SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 459.1325800.2019: Sports facilities for rowing sports. Design rules
SP 461.1325800.2019: Biotransitions at transport infrastructure facilities. Design rules
SP 461.1325800.2019: Biotransitions at transport infrastructure facilities. Design rules
SP 462.1325800.2019: Bus station buildings. Design rules
SP 462.1325800.2019: Bus station buildings. Design rules
SP 463.1325800.2019: Buildings of river and sea stations. Design rules
SP 463.1325800.2019: Buildings of river and sea stations. Design rules
SP 465.1325800.2019: Buildings and constructions. Subway vibration protection. Design rules
SP 466.1325800.2019: Mercenary houses. Design rules
SP 466.1325800.2019: Mercenary houses. Design rules
SP 467.1325800.2019: Car parking. Terms of Use
SP 467.1325800.2019: Car parking. Terms of Use
SP 468.1325800.2019: Concrete and reinforced concrete structures. Rules for ensuring fire resistance and fire safety
SP 469.1325800.2019: The construction of livestock, poultry and animal husbandry enterprises. Terms of Use
SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules
SP 478.1325800.2019: Air terminal buildings and complexes. Design rules
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 482.1325800.2020: Engineering and hydrometeorological surveys for construction. General rules for the production of work
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
Customers Who Viewed This Item Also Viewed:
 |
Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Seismic building design code
Language: English |
Steel welded vessels and apparatus. General specifications.
Language: English |
Welded butt joints of npp pipelines. Types and basic dimensions
Language: English |
Welded seams for CHP plant pipeline joints. Types and main dimensions.
Language: English |
Parts and components of nuclear power plants pipelines made of pearlitic steels for pressure up to 2.2 MPa (22 kgf/cm2). Welds. Types and dimensions
Language: English |
Technical regulations of Customs Union. On the safety of the package
Language: English |
Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
Language: English |
Steel and alloys. Methods for detection and determination of grain size
Language: English |
Metals. Methods of tension tests at elevated temperatures
Language: English |
Liquid filters periodic action, working under pressure. Safety requirements and test methods
Language: English |
Vacuum oils. Method for determination of vapour pressure and boiling point
Language: English |
Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications
Language: English |
Petroleum fuel. Mazut. Specifications
Language: English |
Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock
Language: English |
Canned foods. Juice products. Juices from fresh fruit. General specifications
Language: English |
Diesel fuel. Specifications
Language: English |
Meat. Dressing of beef into cuts. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.