SP 27.13330.2017
СП 27.13330.2017
|
|
Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
Бетонные и железобетонные конструкции, предназначенные для работы в условиях воздействия повышенных и высоких температур
Status: Effective
This set of rules applies to the design of concrete and reinforced concrete structures that are systematically exposed to elevated (from 50 ° C to 200 ° C inclusive) and high (over 200 ° C) process temperatures (hereinafter referred to as temperatures) an
Настоящий свод правил распространяется на проектирование бетонных и железобетонных конструкций, подвергающихся систематическим воздействиям повышенных (от 50°С до 200°С включительно) и высоких (свыше 200°С) технологических температур (далее - воздействия
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
5/15/2017
SKU: RUSS220732
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.99 Other building structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.99 Other building structures »
As a Replacement Of:
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10499-95: Heat insulating products made of glass staples fibre. Technical requirements
GOST 10888-93: Periclasechromite refractories products for the steel melting furnace roofs. Specifications
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 12865-67: Expanded vermiculits.
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 20901-2016: Refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 21880-2011: Thermoinsulating mineral wool broached mats. Specifications
GOST 24704-2015: Corundum and high alumina refractory products. Specifications
GOST 24748-2003: Heat insulation lime-siliceous products. Specifications
GOST 25192-2012: Concretes. Classification and general technical requirements
GOST 2694-78: Foamed diatomite and diatomite thermo insulating products. Technical requirements
GOST 2850-95: Asbestos paperboard
GOST 390-96: Fireclay and semiacidic refractory articles general-purpose and mass production. Specifications
GOST 4157-79: Silica brick refractories. Specifications
GOST 4543-71: Structural alloyed steel
GOST 4689-94: Periclase refractories. Specifications
GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications
GOST 530-2012: Ceramic brick and stone. General specifications
GOST 5381-93: High refractory chromepericlase products. Specifications
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 16.13330.2011: Steel structures
SP 20.13330.2016: Loads and actions
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules
SP 360.1325800.2017: Steel fiber reinforced concrete structures. Design rules
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 83.13330.2016: Industrial furnaces and brick chimneys
The Document is Referenced By:
GOST R 57818-2017: Design standards of buildings and constructions for gas processing industry
GOST R 59652-2021: Oil and gas industry. Lining of thermal equipment. Basic requirements for materials, construction, application and acceptance
GOST R 59664-2021: Oil and gas industry. Abrasion resistant linings. Basic requirements for materials, construction, application and acceptance
GOST R 70416-2023: Reinforced Concrete Protective Shells of Nuclear Power Plant Units. Strength calculation at the design stage
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70520-2022: Reinforcement for reinforced concrete structures. Methods for determining the mechanical properties at high temperatures
GOST R 71504-2024: Concretes. Methods of determination of mechanical properties at high temperatures
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
Methodical manual: Building Design for Refrigerators
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
SP 375.1325800.2023: Industrial flue pipes. Design rules
SP 43.13330.2012: Structures for industrial installations
SP 98.13330.2018: Tram and trolley lines
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.