SP 284.1325800.2016
СП 284.1325800.2016
|
|
Instructions for design, construction and redesign of field oil and gas pipelines
Трубопроводы промысловые для нефти и газа. Правила проектирования и производства работ
Status: Effective - Introduced for the first time
This set of rules applies to the design, production and acceptance of construction and installation work during the construction, reconstruction and overhaul of industrial steel pipelines (hereinafter referred to as pipelines) with a nominal diameter of u
Настоящий свод правил распространяется на проектирование, производство и приемку строительно-монтажных работ при сооружении, реконструкции и капитальном ремонте промысловых стальных трубопроводов (далее – трубопроводы) номинальным диаметром до 1400 мм вкл
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/16/2016
SKU: RUSS220748
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.34 Main and field pipelines »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Code 200-FZ: Forest Code of the Russian Federation
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 1412-85: Flakish graphite cast iron
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 25225-82: Non-destructive testing. Welded joints of tubing. Magnetographic method
GOST 26775-97: Clearances of navigable bridge spans in the inland waterways. Norms and technical requirements
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control
GOST 9.315-91: Unified system of corrosion and ageing protection. Hot-dip aluminium coatings. General requirement and methods of checking
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9238-2013: Construction and rolling stock clearance diagrams
GOST EN 826-2011: Thermal insulating products for building applications. Methods for determination of compression behaviour
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
OST 34-13-881-86: Plywood plates. Technical conditions (restriction GOST 8673-82)
PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.
PB 03-498-02: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SN 452-73: Standards for the Allocation of Land for Trunk Pipelines
SP 121.13330.2012: Aerodromes
SP 121.13330.2019: Airdromes
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 18.13330.2011: Master plans for industrial enterprises
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 36.13330.2012: Trunk pipelines
SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control
SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities
SP 422.1325800.2018: Pipelines trunk and field for oil and gas. Construction of underwater crossings and work control
SP 424.1325800.2019: Pipelines trunk and field for oil and gas. Corrosion protection works by means of electrochemical protection and work execution control
SP 45.13330.2012: Earth structures, bases and foundations
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 47.13330.2016: Engineering survey for construction. Basic principles
SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines
SP 86.13330.2014: Main (Trunk) pipelines
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VSN 014-89: Construction of Trunk and Field Pipelines. Environmental Protection
The Document is Referenced By:
GOST R 59411-2021: Field pipelines made of fiberglass pipes. Design and operation rules
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
Order 850/pr: On approval of Amendment No. 1 SP 284.1325800.2016 "Field pipelines for oil and gas. Rules for design and production of work"
Order 887-r: On the date of entry into force of the provisions of the codes of practice
SP 409.1325800.2019: Main and field pipelines for oil and gas. Work on the installation of thermal and anti-corrosion insulation, control of work performance
SP 366.1325800.2017: Field pipelines. Grade of design based on the risk analysis
SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control
SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities
SP 422.1325800.2018: Pipelines trunk and field for oil and gas. Construction of underwater crossings and work control
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 483.1325800.2020: Field pipelines made of ductile cast iron with spheroidal graphite for oil and gas fields. Design, construction, operation rules
SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.