SP 290.1325800.2016
СП 290.1325800.2016
|
|
Water passageways hydraulic structures (discharge sluices, emptying and dewatering conduits). Rules of projecting
Водопропускные гидротехнические сооружения (водосбросные, водоспускные и водовыпускные). Правила проектирования
Status: Effective - Introduced for the first time
This set of rules establishes requirements for the design of culverts of waterworks under construction and reconstructed, and extends to structures that are part of energy, water-transport and land-reclamation waterworks, water supply systems, drainage an
Настоящий свод правил устанавливает требования к проектированию водопропускных трактов строящихся и реконструируемых водосбросных гидротехнических сооружений и распространяется на сооружения, входящие в состав энергетических, воднотранспортных и мелиорати
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/16/2016
SKU: RUSS220754
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.2 Hydraulic structures for industries »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
National standards »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
The Document References:
Federal Law 117-FZ: Safety of Hydraulic Structures
Federal Law 184-FZ: About technical regulation
GOST 13087-81: Concretes. Method of abrasion test
GOST 19173-80: Container-carrier semitrailer, 20,320 t load capacity. Parameters and dimensions. General specifications
GOST 19185-73: Hydraulic engineering. Basic concepts. Terms and definitions
GOST 24866-89: Sealed insulating glass units
P 76-2000: Handbook for the design of concrete compositions for wear-resistant facings of hydraulic structures
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SO 34.21.204-2005: Recommendations on the forecast of channel transformation in the downstream of waterworks
SP 102.13330.2012: Hydraulic tunnels
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 39.13330.2012: Rock fill dams
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 58.13330.2012: Hydraulic Structures. Basic statements
The Document is Referenced By:
Amendment 4: Amendment to SP 43.13330.2012 SNiP 2.09.03-85 Structures of industrial enterprises
GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards
Order 1077/pr: On approval of Amendment N 1 to SP 290.1325800.2016 "Diversion hydraulic structures (spillways, culverts and outlets). Design Rules".
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 909/pr: On approval of the Plan for development and approval of sets of rules and actualization of previously approved sets of rules for 2022.
SP 104.13330.2016: Ground protection from flooding and underflooding
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 43.13330.2012: Structures for industrial installations
SP 58.13330.2019: Waterworks. Key Points
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.