SP 293.1325800.2017
СП 293.1325800.2017
|
|
Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
Системы фасадные теплоизоляционные композиционные с наружными штукатурными слоями. Правила проектирования и производства работ
Status: Effective - Introduced for the first time
This set of rules applies to composite facade insulation systems with exterior plaster layers (SFCT) used for thermal protection from the outside of enclosing wall structures of buildings and structures for various purposes and the level of responsibility
Настоящий свод правил распространяется на системы фасадные теплоизоляционные композиционные с наружными штукатурными слоями (СФТК), применяемые при тепловой защите с наружной стороны ограждающих стеновых конструкций зданий и сооружений различного назначен
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
7/10/2017
SKU: RUSS220757
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.10 Walls. Partitions. Facades »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.10 Walls. Partitions. Facades »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10528-90: Geodetic levels
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 24258-88: Different types of scaffolding. General specifications
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 27321-87: Demountable tubular scaffold for construction works. Specification.
GOST 28196-89: Water-dispersion paints
GOST 28498-90: Liquid-in-glass thermometers
GOST 29231-91: Cords. Specifications
GOST 31251-2008: Facades of buildings. Fire hazard test method
GOST 32310-2012: Factory made termal insulation products of extruded polystyrene foam (XPS) for building. Specifications
GOST 32314-2012: Factory made mineral wool products used for thermal insulation of buildings. General specifications
GOST 33739-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7948-80: Steel construction plumbs-lines. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 55225-2012: Meshes of glass fibre for building-faces, reinforcing, alkali-resistant. Specifications
GOST R 55412-2013: Faсade’s thermo insulation composite systems with external mortar’s lays. Test methods
GOST R 55818-2013: Polymer base decorative coats for facade’s thermal insulation composite systems with external mortar's lays. Specifications
GOST R 55936-2014: Polymer-cement base adhesives, base coats and patching putties for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 56387-2015: Dry-mix cement based adhesives for tiles. Specifications
GOST R 56623-2015: Non-destructive testing. Methods of determination of thermal resistance of enclosing structures
GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications
GOST R 57270-2016: Building materials. Methods for combustibility tests
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
Resolution 390: Fire safety rules in the Russian Federation
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
SP 11-105-97: Engineering and geological survey for construction
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 17.13330.2017: The roofs
SP 20.13330.2016: Loads and actions
SP 230.1325800.2015: Construction enclosing of buildings characteristics of thermal conductive of inclusions
SP 48.13330.2011: Organization of construction
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 71.13330.2017: Insulation and finish coatings
The Document is Referenced By:
GOST R 56707-2023: Facade thermal insulation composite systems with external plaster layers. General technical conditions
GOST R 58359-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Technical specifications
GOST R 58892-2020: Primer compositions for facade thermal insulation composite systems with external plaster layers. General specifications
GOST R 58937-2020: A decorative and protective finishing layer made of piece materials for facade thermal insulation composite systems with external plaster layers. Specifications
GOST R 58937-2023: Facade thermal insulation composite systems with decorative and protective finishing layer made of piece materials. General technical conditions
GOST R 70309-2022: Grouting compositions for the finishing decorative and protective layer of piece materials for facade thermal insulation composite systems with external plaster layers. Technical conditions
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
