SP 294.1325800.2017
СП 294.1325800.2017
|
|
The construction of steel. Design rules
Конструкции стальные. Правила проектирования
Status: Effective - Introduced for the first time
This set of rules establishes requirements and extends to the design of steel building structures of buildings and structures for various purposes, operating at a temperature not higher than 100 ° C and not lower than minus 60 ° C.
Настоящий свод правил устанавливает требования и распространяется на проектирование стальных строительных конструкций зданий и сооружений различного назначения, работающих при температуре не выше 100 °С и не ниже минус 60 °С.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
5/31/2017
SKU: RUSS220758
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Wire »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.10 Designations of publicly available information »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.10 Designations of publicly available information »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
GOST 10157-2016: Gaseous and liquid argon. Specifications
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10906-78: Square taper washers. Specifications
GOST 11371-78: Washers. Specifications
GOST 11474-76: Bent-steel sections. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 14954-80: Two lay rope type ЛK-P construction 6x19(1+6+6/6)+7x7(1+6). Dimensions
GOST 1497-84: Metals. Methods of tension test
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 18123-82: Washers
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18901-73: Steel wire ropes. Locked conveying wire rope with two layers of Z-wire and type TK core. Dimensions
GOST 19281-2014: High strength rolled steel. General specification
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23118-2012: Building steel structures. General specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications
GOST 24379.0-2012: Foundation bolts. General specifications
GOST 24379.1-2012: Foundation bolts. Structure and dimensions
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 28548-90: Steel tubes. Terms and definitions
GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications
GOST 3062-80: One lay rope type ЛК-О construction 1x7 (1+6). Dimensions
GOST 3064-80: One lay rope type ТК construction 1x37 (1+6+12+18). Dimensions
GOST 3066-80: Two lay rope type ЛК-О construction 6x7 (1+6)+1x7 (1+6). Dimensions
GOST 3068-88: Two lay steel rope type ТК construction 6x37 (1+6+12+18)+1x37 (1+6+12+18). Dimensions
GOST 3081-80: Two lay rope type LK-O construction 6x19(1+9+9)+7x7(1+6). Dimensions
GOST 3090-73: Steel wire ropes. Locked conveying wire rope with one layer of Z-wire and type ТК cope. Dimensions
GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies
GOST 380-2005: Common quality carbon steel. Grades
GOST 3822-79: Bimetallic steel-copper wire
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 6402-70: Lock washers. Specifications
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7372-79: Steel wire for ropes
GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
GOST 7675-73: Steel wire ropes. Locked conveying wire rope with one layer of V-shaped wire, one layer of Z-wire and type ТК cope. Dimensions
GOST 7676-73: Steel wire ropes. Locked conveying wire rope with two layers of V-shaped wire, one layer of Z-wire and type TK core. Dimensions
GOST 8050-85: Carbon dioxide,
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9087-81: Welding melted fluxes
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B
GOST ISO 8673-2014: Hexagon regular nuts (style 1) with fine pitch thread. Product grades A and B
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
GOST R ISO 4014-2013: Hexagon head bolts. Product grades A and B
GOST R ISO 4017-2013: Hexagon head screws. Product grades A and B
GOST R ISO 4759-3-2009: Tolerances for fasteners – Part 3: plain washers for bolts, screws and nuts – product grades A and C
GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions
GOST R ISO 8765-2013: Hexagon head bolts with metric fine pitch thread. Product grades A and B
GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements
OST 36-122-85: Steel building structures. Field connections on dowels. General requirements.
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SP 112.13330.2011: Fire safety of buildings and works
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 16.13330.2017: Steel structures
SP 17.13330.2011: Roofs
SP 20.13330.2016: Loads and actions
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 28.13330.2017: Protection against corrosion of construction
SP 43.13330.2012: Structures for industrial installations
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
GOST R 70571-2022: Welded steel T-beams with transversely corrugated wall for building structures. Range
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
Order 1073/pr: On approval of Amendment N 3 to SP 294.1325800.2017 "Steel structures. Design rules".
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
Order 909/pr: On approval of the Plan for development and approval of sets of rules and actualization of previously approved sets of rules for 2022.
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.