SP 72.13330.2016
СП 72.13330.2016
|
|
Protection of buildings, facilities and structures against corrosion
Защита строительных конструкций и сооружений от коррозии
Status: Effective
This set of rules applies to the production of works on corrosion protection during the construction of new, expansion, reconstruction and technical re-equipment of existing enterprises, buildings and structures and must be observed when building anti-cor
Настоящий свод правил распространяется на производство работ по защите от коррозии при строительстве новых, расширении, реконструкции и техническом перевооружении действующих предприятий, зданий и сооружений и должен соблюдаться при устройстве антикоррози
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/16/2016
SKU: RUSS220769
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.99 Protection of buildings, inside and out, other aspects »
As a Replacement Of:
SP 72.13330.2011: Protection of building structures and structures from corrosion
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.1.6.2309-07: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10146-74: Filter fabrics made of glass twisted complex threads. Specifications
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.3.005-75: Painting works
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.029-76: Special aprons
GOST 12.4.034-2001: Individual respiratory protective devices
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 1347-77: Varnish БТ-783. Specifications
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 1532-81: Viscosimeters of relative viscosity. Specifications
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 19170-2001: Fibre glass. Constructive woven fabrics. Specifications
GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings
GOST 22266-2013: Sulphate-resistant cements. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24444-87: General assembly and technological requirements
GOST 25192-2012: Concretes. Classification and general technical requirements
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 30515-2013: Cements. General specifications
GOST 31108-2016: General structural Portland clinker cements. Specifications
GOST 31189-2015: Dry building binder mixes. Classification
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31814-2012: Conformity assessment. General sampling rules for products testing during attestation assessment
GOST 31893-2012: Conformity assessment. Standards System in Conformity Assessment
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8736-2014: Sand for construction works. Specifications
GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance
GOST 9.052-88: Unified system of corrosion and ageing protection. Oils and greases. Laboratory test methods for mould resistance
GOST 9.053-75: Unified system of corrosion and ageing protection. Non-metallic materials and articles with their application. Method of microbiological resistance tests under natural and atmospheric conditions
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST R 12.4.230.1-2007: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST R 51693-2000: Anticorrosion primers. General specifications
GOST R 55224-2012: Cements for the transport construction. Specifications
GOST R 56592-2015: Mineral Admixtures for Concretes and mortars. General specifications
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 56727-2015: Self-stressing cements. Specifications
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R ISO 14040-2010: Environmental management. Life cycle assessment. Principles and framework
GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
GOST R ISO 8501-1-2014: Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 1. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SP 112.13330.2011: Fire safety of buildings and works
SP 131.13330.2011: BUILDING CLIMATOLOGY
SP 131.13330.2012: Building climatology
SP 16.13330.2011: Steel structures
SP 17.13330.2011: Roofs
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 29.13330.2011: Floors
SP 48.13330.2011: Organization of construction
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
VSN 214-82: Collected volume of instructions on rust-proofing
The Document is Referenced By:
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 24767-2018: Aluminium and aluminium alloys cold-formed sections for enclosing structures. Specifications
GOST 26429-2018: Steel structures of suspended transport tracks. Specifications
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading
GOST R 58520-2019: Cargo gripping means. Classification and General Specifications
GOST R 59626-2022: Public roads Special auxiliary structures and devices for bridge construction. Design rules. General requirements
GOST R 59963-2021: Monolithic steel-fiberconcrete waterproofing of underground reinforced concrete structures of nuclear power plants. Manufacturing technology and quality control
GOST R 70188-2022: Construction works and typical technological processes. Corrosion protection of steel structures in the conditions of the construction site. Rules and control of work performance
GOST R 70237-2022: Unified power system and isolated power systems. Electrical installations. Rules of arrangement. Overhead power transmission lines up to 1 kV. General requirements
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
SP 122.13330.2023: Railroad and road tunnels
SP 129.13330.2019: External networks and water supply and sewerage facilities
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 32.13330.2018: Sewerage. Outdoor networks and facilities
SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire
SP 336.1325800.2017: Ventilation and conditioning systems. Operating rules
SP 381.1325800.2018: Retaining structures. Design rules
SP 389.1326000.2018: Technical operation of seaport infrastructure facilities
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 447.1325800.2019: Railways in permafrost areas. Design Fundamentals
SP 470.1325800.2019: Steel structures. Work Rules
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 483.1325800.2020: Field pipelines made of ductile cast iron with spheroidal graphite for oil and gas fields. Design, construction, operation rules
SP 71.13330.2017: Insulation and finish coatings
SP 74.13330.2023: Heat networks.
ST RK 1857-2008: Motor roads. Requirements at designing of supporting walls
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.