SP 96.13330.2016
СП 96.13330.2016
|
|
Ferrocement structures
Армоцементные конструкции
Status: Effective
The code of rules in development SP 63.13330 establishes requirements for the design of reinforced cement structures - thin-walled reinforced concrete structures (not more than 30 mm thick inclusive) made of fine-grained concrete, in which as a reinforcem
Свод правил в развитие СП 63.13330 устанавливает требования к проектированию армоцементных конструкций - тонкостенных железобетонных конструкций (толщиной не более 30 мм включительно), изготовляемых из мелкозернистого бетона, в качестве арматуры в которых
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/16/2016
SKU: RUSS220779
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.99 Other building structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.40 Fiber-reinforced cement products »
As a Replacement Of:
SNiP 2.03.03-85: Ferro cement structures
SP 96.13330.2011: Reinforced cement structures
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 19281-2014: High strength rolled steel. General specification
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25192-2012: Concretes. Classification and general technical requirements
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 2715-75: Metal wire screens. Types, basic parameters and dimensions
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST R 53772-2010: Reinforced steel low-relaxation 7-wire strands. Specifications
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SNiP 2.03.03-85: Ferro cement structures
SP 112.13330.2011: Fire safety of buildings and works
SP 20.13330.2011: Loads and impacts
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 72.13330.2011: Protection of building structures and structures from corrosion
The Document is Referenced By:
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements
SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.