SP 299.1325800.2017
СП 299.1325800.2017
|
|
Ventilation systems of highway tunnels. Design rules
Системы вентиляции тоннелей автодорожных. Правила проектирования
Status: Effective - Introduced for the first time
This set of rules applies to the design of ventilation systems for road tunnels of all types, including those using jet fans or their combination with tunnel fans.
Настоящий свод правил распространяется на проектирование систем вентиляции автодорожных тоннелей всех типов, в том числе использующих струйные вентиляторы или их комбинацию с тоннельными вентиляторами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
8/16/2017
SKU: RUSS220822
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.54 Wooden structures »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.20 Wooden structures »
The Document References:
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
GOST 1144-80: Half-round head wood screws. Construction and dimensions
GOST 1146-80: Raised countersunk head wood screws. Construction and dimensions
GOST 11539-2014: Bakelized plywood. Specifications
GOST 13913-78: Laminated wood plastics. Specifications
GOST 16483.0-89: Wood. General requirements to physical and mechanical tests
GOST 16483.1-84: Wood. Method for determination of density
GOST 20850-2014: Wooden glued load bearing structures. General specifications
GOST 26816-2016: Cement-bonded wood boards. Specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 33080-2014: Timber structures. Strength classes of structural sawn timber and methods of its determination
GOST 33082-2014: Timber structures. Methods of determining the bearing capacity of the joints
GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use
GOST 3916.2-96: General purpose plywood with coniferous veneer
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 9462-88: Round timber of broadleaf sorts
GOST 9463-2016: Round timber of coniferous species. Specification
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SP 16.13330.2011: Steel structures
SP 20.13330.2011: Loads and impacts
SP 64.13330.2011: Wooden structures.
The Document is Referenced By:
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
Order 807/pr: On the approval of Amendment No. 1 to SP 299.1325800.2017 "Wooden structures with screw assemblies. Design rules"
SP 451.1325800.2019: Public buildings with the use of wooden structures. Design rules
SP 452.1325800.2019: Residential multi-apartment buildings with the use of wooden structures. Design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
