imgalt

VSN 10-83/Minhimprom

ВСН 10-83/Минхимпром

Instruction on designing of oxygen gas pipelines

Инструкция по проектированию трубопроводов газообразного кислорода

Status: Effective

Temporary instruction for the development of projects and cost estimates for agricultural construction

Требования Инструкции распространяются на трубопроводы, работающие в диапазоне температур от минус 200 градусов Цельсия до плюс 200 градусов Цельсия, под давлением до 42 МПа, предназначенные для газообразного кислорода, а также для газообразных смесей кислорода с инертными газами при объемной доле кислорода более 23 %, за исключением трубопроводов для смесей инертных газов с кислородом с объемной долей кислорода не более 40 %, работающих под давлением не более 0,6 МПа, на которые действие настоящей Инструкции не распространяется.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR Ministry of Chemical Industry, 10/17/1983

SKU: RUSS221951

Price: $282.81



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of chemical facilities »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.020 Manufacture in chemical industry »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.99 Other chemical industry equipment »


The Document References:

GOST 10493-81: Rigid and compensating

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions

GOST 12850-80: Cylindrical notched pins with engaged ends. Sizes and technical requirements

GOST 14097-77: Blocks roller rolling supports of steel pipelines. Types and basic dimensions

GOST 14911-82: Steel pipeline parts. Pipe movable supports. Types and main dimensions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 16127-78: Steel piping details. Hangers. Types and principal dimensions

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 1779-83: Asbestos cord

GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 380-71: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 494-90: Pipes of brass

GOST 5152-84: Gland Packing Specifications

GOST 5494-71: Pegmentary aluminium powder

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 6824-76: Distilled glycerine. Specifications

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 8295-73: Graphite of lubricants. Specifications

GOST 859-78: Copper. Grades

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-72: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

OST 26-04-1250-75: Ranks of pipes for pipelines.

OST 26-04-2158-78: Occupational safety standards system. Consumption and pressure measuring equipment. Safety requirements at application in the gas oxygen medium.

OST 26-04-312-71: Oxygen equipment. Methods for degreasing. Materials used

OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.

SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa

SNiP 2.01.01-82: Construction climatology and geophysics

SNiP 3.05.05-84: Processing equipment and process pipelines

SNiP II-A.11-62: Loads and Impacts. Design Standards

TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa

VSN: Rules for protection against static electricity in the chemical, petrochemical and refinery industries

The Document is Referenced By:

IN 4-7-92: Index of regulatory and technical documents (as of 01.03.92)

OMU 42-21-26-88: Departments of hyperbaric oxygenation, rules of operation and repair

OMU 42-21-27-88: Hyperbaric oxygenation devices. Operation and repair rules

ORD 14.370-44-87: Guidelines for the design of oxygen facilities in metallurgical plants

OST 290.004-02: Rules of air division product production design.

RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment

SNiP 3.05.07-85: Automated systems

SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!