GOST 10144-74
ГОСТ 10144-74
|
|
Enamels ХV-124 and ХV-125. Specification
Эмали ХВ-124 и ХВ-125. Технические условия
Status: Not effective - Superseded. IUS 1-1990
Birch logs and chunks for the production of plywood
Стандарт распространяется на эмали ХВ-124 различных цветов и ХВ-125. Эмали предназначаются для окраски загрунтованных металлических поверхностей изделий, а также деревянных поверхностей, эксплуатируемых в атмосферных условиях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
10/14/1974
SKU: RUSS222414
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L24 Varnish and enamel »
The Document is Replaced With:
GOST 10144-89: Enamels XB-124Specifications
As a Replacement Of:
GOST 10144-62: Enamels of perchlorvinyl grade ХВ-124 and grade ХВ-125
The Document References:
GOST 1127-72: Black hot-rolled tin
GOST 12.3.005-75: Painting works
GOST 12707-77: Wash primers. Specifications
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 18187-72: Solvents of РЭ type for electrocoating. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 21531-76: Coatings for paintwork intended for use in areas with a cold climate. General technical requirements
GOST 3584-73: Wire mesh woven with square check and high precision. Specification
GOST 5233-67: Paints and varnishes. Method for determining the hardness of the coating on a pendulum device
GOST 5494-71: Pegmentary aluminium powder
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6613-73: Wire cloth with square cells of normal accuracy
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings
The Document is Referenced By:
GOST 10144-89: Enamels XB-124Specifications
GOST 12962-80: Medium expansion foam-making branch pipes. Specifications
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25130-82: Luminescent fire protective wood coating. Technical requirements
GOST 25131-82: Luminescent fire protective steel coating. Technical requirements
GOST 27544-87: Liquid-in-glass thermometers. General specifications
GOST 28836-90: Resistive strain-gauge
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 8037-80: Hose branchings. Specifications
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 26-01-957-85: Gummed capacitive devices
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.