GOST 10354-73
ГОСТ 10354-73
|
|
Polyethylene film
Пленка полиэтиленовая
Status: Not effective - Superseded
Deviations of form and location of surfaces. Basic definitions. Limit deviations
Отклонения формы и расположения поверхностей. Основные определения. Предельные отклонения
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS222809
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L27 Artificial resins and fiber, plastics and plasticizers »
The Document is Replaced With:
GOST 10354-82: Polyethylene film Specifications
As a Replacement Of:
GOST 10354-63: Polyethylene film
The Document is Referenced By:
GOST 10.79-74: Meat. Frozen in blocks trimmed horse - flesh for export. Technical requirements
GOST 10499-78: Heat insulating products made of glass staple fibre. Technical requirements
GOST 10581-82: Ready-made sewing goods and knitted garments. Marking, packing, transportation and storage
GOST 10718-81: Hydrocyclones. Specification
GOST 11838-75: Frozen hypothises of cattle, sheep, goats and pigs. Specifications
GOST 12453-77: Linen and half-linen fabrics and piece goods, primary packing and marking
GOST 12852.3-77: Cellular concrete. Method for determining shrinkage upon drying
GOST 12926-77: Cattle. Parathyroid glands, frozen. Specifications
GOST 12927-77: Cattle and hog adrenal glands, frozen. Specifications
GOST 12929-67: Frozen testicles of mature bulls, rams and goats. Specifications
GOST 13004-77: Polyethylsiloxane fluids. Specifications
GOST 13215-79: Thrust centers and semi-centers
GOST 14791-79: Sealing non-hardening
GOST 16301-80: Incandescent lamps, for beacons. Specification
GOST 1641-75: Paper. Packing marking, transportation and storage
GOST 16965-71: Protection covers. General specifications
GOST 1713-79: Barium nitrate technical. Technical conditions
GOST 18435-73: Jig bushes. Technical requirements
GOST 18518-80: Automatic machines
GOST 18864-82: Drawing devices. Specification
GOST 18865-82: Drafting machines. Specification
GOST 19691-80: Nitroammophoska. Specification
GOST 19910-74: Water heater instantaneous appliances burning town gas
GOST 20022.4-75: Wood protecting. Panel method of impregnation
GOST 2036-77: Vertical bucket excavators. Specification
GOST 2037-82: Auger conveyors, stationary, general purpose. General specifications
GOST 20477-75: Polyethylene tape with adhesive layer
GOST 21064-75: Paint and lacquer materials. The method of testing coatings for resistance to the action of mineral oil and gasoline
GOST 21469-82: Drawing tools and sets thereof. Specification
GOST 21769-84: Tree verdure
GOST 2197-78: Tungsten acid. Specification
GOST 22160-76: Two layer domes of organic plastic. Specifications
GOST 22281-76: Plate conveyors, stationary, general purpose. Specification
GOST 22379-77: Gauze cotton-wool products. Specification
GOST 22860-77: Cadmium of high purity. Technical requirements
GOST 22861-77: Lead of high purity. Technical requirements
GOST 22982-78: Electrochemical paper
GOST 23173-78: Garden barrows. General technical conditions
GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 25227-82: Silk and half-silk fabrics. Primary packing marking
GOST 25255-82: Rolling bearings. Long cylindrical rollers. Technical requirements
GOST 26569-85: Motion picture films for professional cinematography and television. Marking, packing transportation and storage
GOST 27834-88: Tool joints for drill pipers. Specifications
GOST 3028-78: Mica splitting. Specification
GOST 3575-75: Hoses flexible metal hermetic with a movable seam
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 4601-73: Steel wire tweel mesh cloth with square apertures
GOST 5.1300-72: The water-cooled diode type НМДО-025-1 (НОРД-250) sputter-ion pump with the power supply type БП-100. Quality requirements for certified products
GOST 5.1800-73: Plants for water final refinements of УФ-400А type. Quality requirements of certified products
GOST 6436-75: PE-insulated plastic-sheathed block-signalling cables. Specifications
GOST 7360-82: Subs for drilling strings
GOST 8037-80: Hose branchings. Specifications
GOST 8494-73: Wheaten rusks
GOST 9.028-74: Unified system of corrosion and ageing protection. Interoperational anticorrosive protection of billets, parts and assemblies of metal products. General requirements
GOST 9.059-75: Unified corrosion and ageing protection system. Protective polymer coatings, insulating, decontaminating and accumulating. Classification and designations
GOST 9294-83: Primary cells and batteries. Marking, packing, transporting and storing
GOST 9933-75: Absolute pressure gauges and u-tubes combined pressure vacuum gauges
Guidelines 4077-86: Methodological instructions on sanitary-hygienic evaluation of rubber and latex medical devices
MU 2613-82: Guidelines for gas chromatographic determination of benzene, toluene, ethylbenzene and xylenes in atmospheric air
OST 34-13-879-79: Polyethylene film (limited by GOST 10354-73)
OST 48-286-86: Single-stage Thickeners. Specifications.
P 82-79/VNIIG: Recommendations for the design and construction of anti-filter screens for ash dumps and drives for industrial waste water from power plants
RD 31.55.02.02-80: Spare parts of ship auxiliary mechanisms of foreign construction. Centrifugal pumps. Technical requirements
RD 39-3-308-79: Methods of calculating consumption rates and analysis of polyethylene consumption
RST RSFSR 457-79: Harmonics wind and labial. General technical conditions
RTU BSSR 1573-69: Wallpaper glue
SNiP II-26-76: Roofing
TU 6-05-1274-73: Insulating adhesive tape type-70 for VAZ cars
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.