GOST 1050-60
ГОСТ 1050-60
|
|
High-grade constructional carbon steel. Grades and general technical requirements
Сталь углеродистая качественная конструкционная. Марки и общие технические требования
Status: Not effective - Superseded
Enclosed steel lifting ropes. The rope of spiral with one layer of zeta-like and one layer of x-shaped wires. Range
Стандарт распространяется на углеродистую качественную конструкционную горячекатаную и кованую сортовую сталь размером (диаметром или толщиной) до 250 мм. В части норм химического состава стандарт распространяется также на слитки, обжатую болванку, слябы, заготовки, лист, ленту, широкополосную сталь, трубы, проволоку, поковки и штамповки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
5/31/1960
SKU: RUSS223099
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
As a Replacement Of:
GOST 1050-57: High-quality carbon steel for machine-building. Brands and general specifications
The Document References:
GOST 1497-61: Metals. Tension test method
GOST 5639-65: Steel. Methods for detection and determination of grain size
GOST 5657-69: Steel. Methods for the determination of hardenability
GOST 7564-64: Rolled steel. Method of sampling (billet) for mechanical and technological tests
GOST 7565-66: Steel. Sampling for determination of chemical composition
GOST 7566-69: Steel. General rules for acceptance, packaging, marking and documentation
GOST 8817-73: Metals. Upsetting test method
GOST 9454-60: Metals. Method for determination of impact strength at normal temperature
The Document is Referenced By:
GOST 10411-74: Axles for diesel locomotives of narrow gauge railways. Technical requirements
GOST 10586-63: Lube PVK (gun oil). Technical requirements
GOST 10702-63: Steel for cold setting. Grades and technical requirements
GOST 10885-64: Hot-rolled thick-gauge steel, double-layered, corrosion-resistant
GOST 11059-64: Lubricant for conservation SCC. Technical requirements
GOST 11443-65: Steel calibrated strip. Range
GOST 11675-65: Crawler tractors. Zink (Rail) of track. Technical requirements
GOST 12492-67: Steel of special profiles for agricultural machinery. Range
GOST 1268-67: Steel flanges free on the welded ring. Design, dimensions and technical requirements
GOST 12717-67: Taper thread motor and tractor plugs. Technical requirements
GOST 1272-67: Steel flanges on the flanged tube free of Pd 1, 2,5 and 6 kgf / cm2. Design, dimensions and technical requirements
GOST 12830-67: Flanges with a connecting lug, flat, steel, butt welded. Design, dimensions and technical requirements
GOST 12831-67: Flanges with lug or recess, steel, butt welded. Design, dimensions and technical requirements
GOST 12832-67: Flanges with spike or groove cast steel butt welded. Design, dimensions and technical requirements
GOST 12833-67: Flanges for the lined oval sectional lining, steel butt welded. Design, dimensions and technical requirements
GOST 12834-67: Flanges with a lug or recess, steel, free on the welded ring. Design, dimensions and technical requirements
GOST 12835-67: Flanges for the lens gasket of steel butt welded. Design, dimensions and technical requirements
GOST 12836-67: Connecting blinds with a ledge of flanged steel. Design, dimensions and technical requirements
GOST 12837-67: Blinds with a ledge of flanged steel. Design, dimensions and technical requirements
GOST 12838-67: Plugs with spike of flanged steel. Design, dimensions and technical requirements
GOST 12839-67: Blanking plugs for the oval section of flanged steel. Design, dimensions and technical requirements
GOST 13058-67: Holders for disk cutters to lathes. Design and dimensions
GOST 13059-67: Holders for disk cutters with self-adjustments to lathe. Design and dimensions
GOST 13062-67: Carriage single-rolled holders for knurling. Design and dimensions
GOST 13063-67: Carriage holders double-rolled for net knurling. Design and dimension
GOST 13064-67: Carriage holders straight for bar cutters. Design and dimensions
GOST 13065-67: Carriage holders bent for bar cutters, left and right. Design and dimensions
GOST 13066-67: Carriage holder with skew fastening of bar cutters, open. Design and dimensions
GOST 13067-67: Carriage holder with cross fastening of bar cutters, open. Design and dimensions
GOST 13068-67: Carriage holder with cross fastening of bar cutters closed. Design and dimensions
GOST 13069-67: Carriage holders boring with straight fastening of a cutter. Design and dimensions
GOST 13070-67: Carriage holders boring with skew fastening of a cutter. Design and dimensions
GOST 1530-66: Carbon hot-rolled steel strips of high quality in rolls for structural parts. Technical requirements
GOST 1631-61: Grease 1-13 of fat. Technical requirements
GOST 1642-50: Spindle oil AU. Specification
GOST 17380-72: Details of pipelines made of carbon steel seamless welded to Pn from 1 to 100 kgf / cm2 (from 0.1 to 10 MPa). General technical requirements
GOST 1759-70: Bolts, screws, pins and nuts
GOST 19257-73: Holes for threading metric thread. Diameters
GOST 19258-73: Bars for threading metric thread. Diameters
GOST 19271-73: Machine full-length cylinder end readers for processing details from light alloys. Technical requirements
GOST 1957-52: Grease universal refractory UT (fat konstalin). Specification
GOST 19597-74: Garden rake. Specifications
GOST 19598-74: Garden hoes, weeders and cultivators. Specifications
GOST 19733-74: Pipe point opening socket wrenches
GOST 19826-74: Chain pipe tongs
GOST 20122-74: Centering pins for pattern plates. Design and dimensions
GOST 20123-74: Guide pins for pattern plates. Design and dimensions
GOST 20124-74: Fastening centering pins for pattern plates. Design and dimensions
GOST 20125-74: Fastening guide pins for pattern plates. Design and dimensions
GOST 20126-74: Centering bushes for pattern plates. Design and dimensions
GOST 2015-53: Limit gauges, smooth, unregulated. Specification
GOST 2284-43: Cold-rolled steel strip of engineering steel
GOST 2287-61: Flat thread chasers
GOST 2591-57: Hot-rolled steel square. Types and sizes
GOST 2649-52: Ammunition lube. Specification
GOST 2712-52: Grease АМС. Specifications
GOST 2967-52: Lubrication for instruments AF-70 (grease UNMA). Specification
GOST 3005-51: Lubrication for cannon (lubrication UNZ). Specification
GOST 3045-51: Gun oil VO. Specification
GOST 3257-53: Industrial lubrication for rolling mills (IP-1 grease). Specification
GOST 3260-54: Ammo grease (grease VS). Specification
GOST 3276-63: Lube GOI-54p. Technical requirements
GOST 3632-47: Band steel for bicycle and motorcycle chain bushings
GOST 4041-48: Hot-rolled thick-gauge high-quality carbon steel for automobile construction
GOST 4096-62: Petrolatum. Technical requirements
GOST 4113-48: Composition for the protection of ammunition (lubricant PP-95/5). Specification
GOST 4294-62: Portholes and shields. Technical requirements
GOST 4366-64: Synthetic grease. Technical requirements
GOST 4874-49: Lubrication rotary (lubrication IR). Specification
GOST 4952-49: Lubrication for textile (lubrication IT). Specification
GOST 5.1650-72: ПРВН-53 device for plantage at vineyards. Quality requirements for certified production
GOST 5.191-69: Bending-unbending machine, type РЗМ-2 for the home preserving. Quality requirements for certified products
GOST 503-67: Cold-rolled steel strip of low-carbon steel
GOST 5078-49: Grease VL. Specification
GOST 542-50: Car transmission oil. Specification
GOST 5443-50: Rolled steel. Flange elbows. Assortment
GOST 5573-50: Grease for airplane refractory ST (lubricant NK-50). Specification
GOST 5649-51: Industrial Lubrication for bearings of Karetnikova IPK. Specification
GOST 5702-51: Safety Grease SP-3 (grease 59c). Specification
GOST 5703-65: Synthetic constaline Specification
GOST 5730-51: Automobile grease for the front drive axle AM (cardan). Specification
GOST 6422-52: Rolled steel strips for nuts
GOST 6708-53: Industrial lubrication for rolling mills (IP-2 grease). Specification
GOST 6953-54: Greases. Method for determining the ability of a lubricant to keep a continuous layer on the surface of the metal
GOST 7041-71: Fire snaphook
GOST 7131-64: Bridge cranes. Technical requirements
GOST 7171-63: Petrol-resisting grease. Technical requirements
GOST 782-59: Grease UN (technical vaseline). Technical requirements
GOST 8107-64: Valves for pneumatic tires of constant pressure
GOST 8275-57: Bent steel profiles. Formed profile. Range
GOST 8281-57: Bent steel profiles. U-shaped non-equal profiles. Range
GOST 8282-57: Bent steel profiles. C-shaped profile. Range
GOST 8551-57: Grease ЦИАТИМ-205. Technical requirements
GOST 9.040-74: Unified system of corrosion and ageing protection. Calculated and experimental method for accelerated test of corrosion losses in atmospheric conditions
GOST 9185-59: Conservation lube K-15. Technical requirements
GOST 9246-59: Wheel pairs for wide gauge trunk railroad cargo wagons. Main parameters, sizes and technical specifications
GOST 9488-60: Tin plate, cold rolled sheets, hot-dip tinning
GOST 9634-64: Apparatus of column type. Cap capsules of steel. Design and dimensions. Technical requirements
GOST 9762-61: Grease МС-70. Technical requirements
GOST 9811-61: Liquid gun grease RZ. Technical requirements
GOST 9974-62: Lubricant, industrial, metallurgical № 137. Technical requirements
MN 1401-61: Staples and sheet templates. Double-sided staples with a handle for lengths from 2 to 250 mm
MN 1402-61: Staples and sheet templates. Double-sided staples with handle and elongated jaws for lengths from 20 to 150 mm
MN 1403-61: Staples and sheet templates. Double-sided brackets for heights from 3 to 6 mm
MN 1404-61: Staples and sheet templates. Double-sided brackets for heights over 6 to 100 mm
MN 1405-61: Staples and sheet templates. Double-sided staples with extended jaws for heights above 6 to 100 mm
MN 1406-61: Staples and sheet templates. Double-sided templates for heights from 1 to 100 mm
MN 1407-61: Staples and sheet templates. Unilateral brackets for heights from 6 to 200 mm
MN 1408-61: Staples and sheet templates. Single side brackets with extended jaws for heights from 6 to 100 mm
MN 1409-61: Staples and sheet templates. One-sided templates for heights from 1 to 75 mm
MN 1410-61: Staples and sheet templates. Double-sided templates for depths from 1 to 100 mm
MN 1411-61: Staples and sheet templates. One-sided templates for depths from 1 to 70 mm
MN 1412-61: Staples and sheet templates. Double-sided templates for steps from 3 to 300 mm
MN 1413-61: Staples and sheet templates. Risk templates for lengths from 3 to 300 mm
MN 1414-61: Staples and sheet templates. Step templates for lengths from 20 to 300 mm
MN 1415-61: Staples and sheet templates. Patterns for external chamfers with an angle of 30 degrees
MN 1416-61: Staples and sheet templates. 45 ° Bevel Patterns
MN 1417-61: Staples and sheet templates. 60 ° Bevel Chamfer Templates
MN 1418-61: Staples and sheet templates. Scale patterns for external chamfers with an angle of 30 degrees
MN 1419-61: Staples and sheet templates. Scale patterns for external chamfers with an angle of 45 degrees
MN 1420-61: Staples and sheet templates. Scale templates for external chamfers with an angle of 60 degrees
MN 1421-61: Staples and sheet templates. Scale patterns for internal chamfers with a 120 degree angle
MN 1422-61: Staples and sheet templates. Patterns for internal chamfers with a 90 degree angle
MN 1423-61: Staples and sheet templates. Chamfer templates with 75 degree angle
MN 1424-61: Staples and sheet templates. 60 ° angle chamfer patterns
MN 1425-61: Staples and sheet templates. 45 ° angle chamfer templates
MN 1811-61: Staples for monitoring lengths over 500 to 2000 mm. Sponges to tubular brackets for length control
MN 4010-62: Piping Components. Supports for Steel Pipes, Clamp-Type, Fixed
MN 4011-62: Details of pipelines. Support clamp sliding steel pipelines
MN 4012-62: Details of pipelines. Supports clamp sliding elongated steel pipelines
MN 4014-62: Details of pipelines. Support clamp sliding steel pipelines with refrigerant
MN 4019-62: Details of pipelines. Supports steel pipelines. Squares
MN 4021-62: Details of pipelines. Supports steel pipelines. Technical requirements
MN 471-64: Gauge braces with beveled lips. Compound brackets for controlling diameters of grooves from 1 to 6 mm
MN 472-64: Gauge braces with beveled lips. Staples sheet to control the diameters of the grooves of St. 3 to 10 mm
MN 473-64: Gauge braces with beveled lips. Staples sheet to control the diameters of the grooves of St. 10 to 100 mm
MN 478-64: Gauge braces with beveled lips. Staples sheet with replaceable jaws to control the diameters of the grooves of St. 100 to 360 mm
MN 4969-63: Details of pipelines. Pipes with flanges on Ru from 200 to 1000 kgf
MN 4970-63: Details of pipelines. Deaf lenses with a pointer to Ru from 200 to 1000 kgf
MN 4971-63: Details of pipelines. Fittings on Ru from 200 to 500 kgf
MN 4972-63: Details of pipelines. Branches bent with flanges on Ru from 200 to 1000 kgf
MN 4973-63: Details of pipelines. Elbow with a 90 degree angle with flanges on Ru from 200 to 1000 kgf
MN 4975-63: Details of pipelines. Elbow with a 90 degree angle inequality with flanges on Ru from 200 to 1000 kgf
MN 4976-63: Details of pipelines. An elbow with an angle of 86 degrees unequal with flanges and a support on the Ru from 200 to 1000 kgf
MN 4977-63: Details of pipelines. Elbow with an angle of 94 degrees unequal with flanges and bearing on the Ru from 200 to 1000 kgf
MN 4978-63: Details of pipelines. Support for knees on Py from 200 to 1000 kgf
MN 4979-63: Details of pipelines. Double knees with flanges on Py from 200 to 1000 kgf
MN 4980-63: Details of pipelines. Squares with branches and flanges on Py from 200 to 1000 kgf
MN 4981-63: Details of pipelines. Reducing tees with flanges on Py from 200 to 1000 kgf
MN 4982-63: Details of pipelines. Tees through passage with branches and flanges on Ru from 200 to 1000 kgf
MN 4983-63: Details of pipelines. Asymmetrical transition tees with flanges on Ru from 200 to 1000 kgf
MN 4984-63: Details of pipelines. Transition tees with flanges on Ru from 200 to 1000 kgf
MN 4985-63: Details of pipelines. Tees-inserts with flanges on Ru from 200 to 1000 kgf
MN 4986-63: Details of pipelines. Transitions turned with flanges on Ru from 200 to 1000 kgf
MN 4987-63: Details of pipelines. Transitions stamped with flanges on Ru from 200 to 1000 kgf
MN 4988-63: Details of pipelines. Lens measuring diaphragms with flanges on Ru from 200 to 640 kgf
MN 4989-63: Details of pipelines. Branches lens with flanges on Ru from 200 to 640 kgf
MN 4990-63: Details of pipelines. Squares on resistance thermometers and thermocouples on Py from 200 to 1000 kgf
MN 4991-63: Details of pipelines. Flanges for resistance thermometers and thermocouples on Py from 200 to 1000 kgf
MN 4992-63: Details of pipelines. Pockets for resistance thermometers and thermocouples on Py from 200 to 1000 kgf
MN 4993-63: Details of pipelines. Transitional flanges on Py from 200 to 1000 kgf
MN 4994-63: Details of pipelines. Transitional flanges with an insert on Py from 200 to 320 kgf
MN 4995-63: Details of pipelines. Plugs on Py from 200 to 1000 kgf
MN 4996-63: Details of pipelines. Plugs with an insert on Py from 200 to 320 kgf
MN 4997-63: Details of pipelines. Pipes on Ru from 200 to 1000 kgf
MN 4998-63: Details of pipelines. Branches bent on Ru from 200 to 1000 kgf
MN 4999-63: Details of pipelines. Knee with an angle of 90 degrees and a support on the Ru from 200 to 1000 kgf
MN 5000-63: Details of pipelines. An elbow with an angle of 86 degrees, unequal support with a support on the Ru from 200 to 1000 kgf
MN 5001-63: Details of pipelines. An elbow with an angle of 94 degrees unequal support with a support on Ru from 200 to 1000 kgf
MN 5002-63: Pipeline parts. Double knee on Ru from 200 to 1000 kgf
MN 5003-63: Pipeline parts. Squares with branches on Ru from 200 to 1000 kgf
MN 5004-63: Pipeline parts. Tees transitional to Ru from 200 to 1000 kgf
MN 5005-63: Pipeline parts. Tees through passage with branches on Ru from 200 to 1000 kgf / cm2. Design and dimensions
MN 5006-63: Pipeline parts. Transition tees asymmetric on Ru from 200 to 1000 kgf / cm2. Design and dimensions
MN 5007-63: Pipeline parts. Tees inserts on Ru from 200 to 1000 kgf / cm2. Design and dimensions
MN 5008-63: Pipeline parts. Transitions turned to Ru from 200 to 1000 kgf / cm2. Design and dimensions
MN 5009-63: Pipeline parts. Transitions stamped on Ru from 200 to 1000 kgf / cm2. Design and dimensions
MN 5010-63: Details of pipelines on the Ru from 200 to 1000 kgf / cm2. Technical requirements
ON 025 283-66: Constipation of the sides of the truck platforms
ON 025 314-68: Trucks and buses. Friction clutches hydromechanical gears. Types and basic parameters
OST 23.328-71: Plank-type clips. Construction and dimensions.
OST 24.540.02: Pipelines of thermal power plants for parameters Ru 64 - 400. Butt weld flanges with a protrusion
OST 34 001-73: Lifting equipment. Requirements for materials
OST 37.001.041-72: Bolts of pivot leaf springs of automobile rolling stock. Types and main sizes
RD 34.21.142: Guidelines for the Design of Steel Pipelines for Hydraulic Structures
RD 34.24.601: Instructions for repair of dust preparation equipment of power plants
SN 101-60: Specifications for the installation of boiler equipment
SN 363-66: Guidelines for the design, manufacture and installation of building steel structures intended for use in low temperature conditions
SN 393-69: Instructions on welding of reinforcement joints and embedded parts of reinforced concrete structures
TU 84-20-68: Organosilicate materials
U 347-00-4: Guidelines for the design and installation of oxygen gas pipelines
Zh3-139: Recommendations for the design of pipelines for water treatment plants. Assortments of pipeline parts. Construction and laying of pipelines
Zh3-78: Temporary recommendations for the design of boiler plants in the northern building-climate zone
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.