imgalt

GOST 12.2.026.0-2015

ГОСТ 12.2.026.0-2015

Woodworking machinery. Construction safety requirements

Оборудование деревообрабатывающее. Требования безопасности к конструкции

Status: Effective - Supersedes. IUS 10-2016

The standard applies to woodworking equipment for industrial purposes, intended for use in climatic conditions UHL 1-UHL 4 according to GOST 15150 and establishes general and special safety requirements for the design of machine tools of all types and specific groups, as well as devices used in conjunction with them, designed for connection to AC mains with voltage up to 660 V and frequency up to 200 Hz.

Стандарт распространяется на деревообрабатывающее оборудование производственного назначения, предназначенного для использования в климатических условиях УХЛ 1-УХЛ 4 по ГОСТ 15150 и устанавливает общие и специальные требования безопасности к конструкции станков всех типов и конкретных групп, а также на применяемые совместно с ними устройства, рассчитанные на подключение к питающей сети переменного тока напряжением до 660 В и частотой до 200 Гц.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 5/12/2016

SKU: RUSS225855

Price: $669.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 79 WOOD PROCESSING TECHNOLOGY » 79.120 Woodworking equipment » 79.120.10 Woodworking machines »

National standards » 79 WOOD PROCESSING TECHNOLOGY » 79.120 Woodworking equipment » 79.120.10 Woodworking machines »


As a Replacement Of:

GOST 12.2.026.0-93: Woodworking equipment safety requirements for design

The Document References:

GOST 12.0.002-80: Occupational safety standards system. Terms and definitions

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.028-80: System of the standards for safety of work

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.017-93: The forging and pressing equipment general safety requirements

GOST 12.2.022-80: Conveyers.

GOST 12.2.029-88: Machine tool attachments

GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.036-78: Press moulds for mechanical-rubber articles

GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors

GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements

GOST 12.2.101-84: Pneumatic drives

GOST 12.3.001-85: System of labor safety standards pneumatic drives

GOST 12.4.026-76: Signal colors and safety signs

GOST 12.4.040-78: Industrial equipment controls

GOST 13837-79: General purpose dynamometers

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 17677-82: Light fixtures

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 21021-2000: Numerical control units. General technical requirements

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 21753-76: Man -machine system control levers

GOST 21889-76: Man-machine system. Operator's arm-chair. General ergonomic requirements

GOST 22269-76: Man-machine system Operator workplace layout of workplace elements General ergonomic requirements

GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements

GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements

GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements

GOST 23511-79: Industrial radio frequency interference generated by domestic electrical appliances used in residential buildings, or connected to domestic power sources

GOST 25166-82: Machines for the pulp and paper industry

GOST 25223-82: Wood-working equipment

GOST 26583-85: Maintenance system for technological equipment of engineering work. Metal cutting, forge-and-pressing, casting and woodworking operational and

GOST 26642-85: Numerical control units for metalworking machines. External communication with machines

GOST 28288-89: Light fixtures with built-in

GOST 29037-91: Electromagnetic compatibiliтy of technical means. Certification tests. Ceneral rules

GOST 31206-2012: Woodworking equipment. Woodworking-transportable machines, semi-fixed, for individual use. General safety requirements

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 9146-79: Machines. Controls. Direction of action

GOST EN 1070-2003: Safety of machinery. Terms and definitions

GOST EN 1218-1-2013: Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table

GOST EN 1218-2-2014: Safety of woodworking machines. Tenon cutting machines. Part 2. Machines for bilateral tendon cutting and / or profiling with chain conveyor feed

GOST IEC 60204-1-2002: Safety of machinery. Electrical equipment of machines. Part 1. General requirements

GOST ISO 12100-2013: Safety of machine tools. General principles for design. Risk assessment and risk reduction

GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 51318.14.1-99: Electromagnetic compatibility of technical equipment. Radio disturbance from household appliances, electric tools and similar apparatus. Limits and test methods

GOST R 52543-2006: Hydraulic drives. Safety requirements

GOST R 52869-2007: Pneumatic drives. Safety requirements

GOST R 55701.1-2013: Luminaire. Part 1. General requirements for performances

GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements

GOST R ISO 3746-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey methods using an enveloping measurement surface over a reflecting plane

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!