imgalt

GOST 1435-74

ГОСТ 1435-74

Non-alloyed tool steel. Specification

Сталь нелегированная инструментальная. Технические условия

Status: Not effective - Superseded

Semi-cylinders, heat-insulating, from mineral wool on synthetic binder

Стандарт распространяется на углеродистую инструментальную горячекатаную, кованую, калиброванную сталь, сталь со специальной отделкой поверхности и сталь для сердечников.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 6/27/1974

SKU: RUSS229730

Price: $475.20



imgalt

The Product is Contained in the Following Classifiers:

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


The Document is Replaced With:

GOST 1435-90: Unalloyed tool steel bars, strips and coils

As a Replacement Of:

GOST 1435-54: Carbon tool steel. Specification

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 1051-73: Calibrated quality steel

GOST 1133-71: Forged round and square steel. Dimensions

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions

GOST 7417-75: Calibrated round steel

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-81: Rolled stock and products for further treatment

GOST 8559-75: Square bar steel. Products sizes

GOST 8560-78: Calibrated hexahedral rolled stock

GOST 8817-82: Metals. Upsetting test method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

The Document is Referenced By:

GOST 11042-90: Construction steel hammers. Specifications

GOST 11310-90: Asbestos cement pipes and couplings. Methods of test

GOST 12206-66: Holding devices. Fit shanks. Design

GOST 12209-66: Holding devices. Cylindrical locating pins of permanent type. Design

GOST 12210-66: Holding devices. Cut locating pins of permanent type. Design

GOST 12211-66: Holding devices. Cylindrical locating pins of changeable type. Design

GOST 12212-66: Holding devices. Cut locating pins of changeable type. Design

GOST 12213-66: Holding devices. Locating pins. Design

GOST 12214-66: Holding devices. Bushes for indexes and locating pins with bead. Design

GOST 12215-66: Holding devices. Bushes for indexes and locating pins. Design

GOST 12268-79: Electrical insulating board. Methods for determination of test voltage resistance, surface discharge resistance and compressibility under pressure

GOST 12509-75: Carbide tipped counterbores. Technical requirements

GOST 13157-67: Cone bushes for indexes of machine retaining devices. Design and dimensions

GOST 13215-79: Thrust centers and semi-centers

GOST 13440-68: Flat head rest buttons for machine retaining devices. Design

GOST 13441-68: Spherical head rest buttons for machine retaining devices. Design requirements

GOST 13443-68: Jig rest buttons for machine retaining devices. Design

GOST 13995-78: Steel rustic tool. Specifications

GOST 1465-80: Files

GOST 1513-77: Needle files. Technical conditions

GOST 15863-81: Plate blanks of die sets for plate blanks of die sets for sheet presswork for shearing operations

GOST 15876-90: Gauges for products made from wood and wooden materials

GOST 15936-70: Quick-changing stiff adapters for taps. Design and dimensions

GOST 16158-70: Quick-change jaw chucks for broaches of horizontal broaching machine tools. Design and dimensions

GOST 16159-70: Quick-change chucks with locating pin for broaches of horizontal broaching machine tools. Design and dimensions

GOST 16160-70: Chucks for splined broaches of horizontal broaching machine tools. Design and dimensions

GOST 16211-70: Centre cone arbors. Design and dimensions

GOST 16212-70: Cylindrical centre arbors. Design and dimensions

GOST 16213-70: Cylindrical stepped centre arbors. Design and dimensions

GOST 16245-70: Chill moulds. Spring pushers. Construction and dimensions

GOST 16246-70: Chill moulds. Pushers. Construction and dimension

GOST 16247-70: Chill moulds. Devices for push of castings. Construction and dimensions

GOST 16262-70: Chill moulds. Technical requirements

GOST 16379-70: Blanks of details of sizing dies inserts. Construction and dimensions

GOST 16622-80: Punches round with a conic flange and without flange. Design and dimensions

GOST 17179-71: Turret lathe with cylindrical collets. Design and dimensions

GOST 17180-71: Turret lathe collets with eccentrically positioned cylindrical hole. Design and dimensions

GOST 17182-71: Turret lathe collets with eccentrically positioned hole for double nests. Design and dimensions

GOST 17183-71: Turret lathe collets with displaced cylindrical hole for double nests. Design and dimensions

GOST 17184-71: Turret lathe collets with rib and concentrically positioned cylindrical hole. Design and dimensions

GOST 17185-71: Turret lathe collets with rib and eccentrically positioned cylindrical hole. Design and dimensions

GOST 17774-72: Pins locating cylindrical high. Design

GOST 17775-72: Pins locating cut high. Design

GOST 18069-72: Clamping bushings with a slider for tools with a cylindrical tail. Design and dimensions

GOST 18070-72: Clamping bushings with a shoulder for tools with a cylindrical tail. Design and dimensions

GOST 18259-72: Thrust centres with cone 1:10 and 1:7. Design and dimensions

GOST 18260-72: Thrust centres with screwed-off nut and cone 1:10 and 1:7. Design and dimensions

GOST 18435-73: Jig bushes. Technical requirements

GOST 18578-89: Builders axes. Specifications

GOST 18718-73: Guide posts for changeable sheet stamping dies. Construction and dimensions

GOST 18719-73: Guide posts with shoulders for changeable sheet stamping dies. Construction and dimensions

GOST 18732-80: Sections for female dies (punches). Design and dimensions

GOST 18734-80: Scrap cutters. Design and dimensions

GOST 18735-80: Rectangular scrap cutters. Design and dimensions

GOST 18736-80: Overrunning stop cutting blades. Design and dimensions

GOST 18737-80: Overrunning stop cutting blades with lugs. Design and dimensions

GOST 18738-80: Stops for overrunning stop cutting blades. Design and dimensions

GOST 18748-80: Stepped countersunk stops with a plate. Design and dimensions

GOST 18760-80: Rollers for blank holders. Design and dimensions

GOST 18844-73: Non-slaving taps. Technical requirements

GOST 18975-86: Knife for finishing works. Specification

GOST 19246-82: Sheets and slabs from rolled slag-cobalt. Specification

GOST 19579-80: Units of general purpose adjusting hammer dies for precision die forging by means of crank presses. Design and dimensions

GOST 19671-81: Tungsten wire for light sources. Specification

GOST 19826-74: Chain pipe tongs

GOST 19859-74: Plates for sheet stamping cupping dies (blanks). Specifications

GOST 19936-74: Bases of dies for die casting. Design and dimensions

GOST 19938-74: Rectangular pushers of dies for die casting. Design and dimensions

GOST 19939-74: Cylindrical pushers of dies for die casting. Design and dimensions

GOST 19940-74: Locks for slides of dies for die casting. Design and dimensions

GOST 19941-74: Wedges for slides of dies for die casting. Design and dimensions

GOST 19949-74: Pins for wax-pattern dies. Design and dimensions

GOST 19950-74: Bushes for wax-pattern dies. Design and dimensions

GOST 19951-74: Guide columns for wax-pattern dies. Design and dimensions

GOST 19952-74: Guide bush for wax-pattern dies. Design and dimensions

GOST 19953-74: Rests for wax-pattern dies. Design and dimensions

GOST 19954-74: Compensators for wax-pattern dies. Design and dimensions

GOST 19955-74: Counter ejectors for wax-pattern dies. Design and dimensions

GOST 19958-74: Cylinder ejectors for wax-pattern dies. Design and dimensions

GOST 19959-74: Rectangular ejectors for wax-pattern dies. Design and dimensions

GOST 19962-74: Stops for wax-pattern dies. Design and dimensions

GOST 19963-74: Locks for wax-pattern dies. Design and dimensions

GOST 19987-74: Pouring date bushing of wax-pattern dies. Design and dimensions

GOST 19988-74: Centre rods for wax-pattern dies. Design and dimensions

GOST 19989-74: Centre buch for wax-pattern dies. Design and dimensions

GOST 19990-74: Ejector return rod of wax-pattern dies. Design and dimensions

GOST 19992-74: Inclined pins for wax-pattern dies. Design and dimensions

GOST 19995-74: Pin cams for wax-pattern dies. Design and dimensions

GOST 20329-74: Cutting off saws for cutting thermosetting plastics and thermoplast. Specifications

GOST 20925-75: Units of changeable press-moulds with low positioned loading chamber for moulding thermoset articles. Construction and dimensions

GOST 20930-75: Spreaders. Construction and dimensions

GOST 20932-75: Loading moulding for loose press-moulds. Construction and dimensions

GOST 21088-75: Pushers with threaded shank for chill moulds with fluid cooling. Construction and dimensions

GOST 21089-75: Quick detachable pushers for chill moulds with fluid cooling. Construction and dimensions

GOST 21189-75: Prismatic supports for automatic lathe holders. Design and dimensions

GOST 21528-76: Solid carbide reamers for machining corrosion-proof and heat-resisting steels and alloys. Technical requirements

GOST 21542-76: Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 22072-76: Guide pins of injection moulds. Design and dimensions

GOST 22077-76: Spring bushings of injection moulds. Design and dimensions

GOST 22078-76: Central bushings of injection moulds. Design and dimensions

GOST 22357-87: Figure skates. General specifications

GOST 22358-87: Racing and hockey skates. General specifications

GOST 23159-78: Dies and cams for angular tap wrench technical conditions

GOST 23461-84: Diamond broach files

GOST 24317-80: Blocks of cassettes press moulds for producing the rubber technical parts. Design and dimensions

GOST 24474-80: Marking tools

GOST 24516-80: Packets quick-changing with horizontal break of press-moulds for manufacturing of rubber O-rings section. Construction and dimensions

GOST 24526-80: Sections for female dies (punches) with pin plug. Design and dimensions

GOST 24528-80: Flanged overrunning stop cutting blades. Design and dimensions

GOST 24529-80: Flanged overrunning stop cutting blades with lugs. Design and dimensions

GOST 24531-80: Wedge holder. Design and dimensions

GOST 24532-80: Unstuckers. Design and dimensions

GOST 24533-80: Pin-hole punches. Design and dimensions

GOST 24534-80: Bushes for pin-hole punches. Design and dimensions

GOST 24541-80: Locks of removable die parts. Design and dimensions

GOST 24733-81: Single pole sockets and plugs with contact diameter 1,6 and 4,0 mm. Specifications

GOST 25084-89: Universal dies with replaceable built-up tool sets

GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification

GOST 26238-84: Normal and high precision jig bushes. Technical requirements

GOST 26396-84: Tools for cold upset automatic machines. Dies for cutting off bolt blanks. Construction and dimensions

GOST 26397-84: Tools for cold upset automatic machines. Bolt heading dies. Construction and dimensions

GOST 26506-85: Tools for cold-forming machines. Dies for cutting ofnut blanks. Construction and dimensions

GOST 26507-85: Tools for cold-forming machines. 1 St station dies. Construction and dimensions

GOST 26508-85: Tools for cold-forming machines. 2Nd station dies. Construction and dimensions

GOST 26509-85: Tools for cold-forming machines. 3rd station dies. Construction and dimensions

GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions

GOST 26511-85: Tools for cold-forming machines. 5Th station dies. Construction and dimensions

GOST 26512-85: Tools for cold-forming machines. 1St station punches. Construction and dimensions

GOST 26514-85: Tools for cold-forming machines. 3rd station punches. Construction and dimensions

GOST 26516-85: Tools for cold-forming machines. 5Th station punches. Construction and dimensions

GOST 27266-87: Molybdenum wire for light sources

GOST 27702-88: Steel and alloys. Unified grades

GOST 28010-88: Mould guide pillars, straight and shouldered, locating guide pillars, shouldered

GOST 28011-88: Mould guide bushes, headed and locating guide bushes, headed

GOST 28037-89: Wire cutters

GOST 3497-74: Wearing plates for cutter bars of agricultural machines

GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions

GOST 4545-88: Explosives, high. Sensitivity characteristics determination for impact

GOST 5468-88: Needle wire

GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines

GOST 5524-75: Saws for vertical gang mills

GOST 5735-81: Carbide tipped machine reamers. Specifications

GOST 5984-80: Explosives. Methods for determination of brisance

GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods

GOST 8.236-77: State system for ensuring the uniformity of measurements. Measuring knives. Methods and means of verification

GOST 8781-71: Low-temperature clock oils. Specifications

GOST 8925-68: Flat clearance gauges for machine retaining devices. Design

GOST 8926-68: Cylindrical clearance gauges for machine retaining devices. Design

MI 1782-87: GSI. Calibration procedure

MI 1812-87: Gages threaded tapered. Methods of control

MI 1946-88: Methodical instructions. GSI Normalyzers. Models БВ-5045, БВ-5046, 22202. Verification procedure

MI 516-84: Methodical instructions. Caliper of the traveling PShV type. Verification Method

MU 34-13-21-86: Methods of determining the sizes and classes of helical compression and tension coil springs made of round steel

MU 342: Methodical instructions. The device for checking PPI-3 indicators. Methods and means of verification

OST 4 G0.059.297: Clamps. Construction and dimensions

R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes

R 4.054.103-89: Instrument parts are precision metal. Stabilization of sizes by heat treatment. Typical Processes

RDMU 80-76: Guidelines for designing sheet metal stamping for separation operations

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

TU 301-05-17-89: Fluoroplast-40

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!