Vernier callipers. Specifications
Штангенциркули. Технические условия
Status: Not effective - Superseded
Vernier callipers. Specifications
Штангенциркуль. Характеристики
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS232876
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P53 Instruments for measuring lengths (outer and inner dimensions) »
The Document is Replaced With:
GOST 166-89: Vernier callipers. Specifications
As a Replacement Of:
GOST 166-73: Vernier callipers. Types. The main parameters. Technical requirements
The Document is Referenced By:
GOST 10.55-71: Birch plywood. Technical requirements for export products
GOST 10134.2-82: Glass inorganic and glass-crystal materials. Method for determination of acid resistance
GOST 10279-80: Glass settling vessels for automobile and tractor engines
GOST 10377-78: Colorless glass for gas masks and goggles. Specifications
GOST 10381-75: High-refractory mullite bricks for blast furnace bottom lining
GOST 1059-72: Felted high boots. Rules of acceptance and test methods
GOST 10598-82: Air-water coolers for diesels and gas engines with supercharging
GOST 10918-82: Micaceons plates and micaceons details. Test methods
GOST 11042-90: Construction steel hammers. Specifications
GOST 11101-73: Air-foam nozzle. Specifications
GOST 11103-85: Inorganic glass and glass crystal materials. Method for the determination of thermal stability
GOST 11235-75: Phenolformaldehyde resins. Methods for determination of free phenol
GOST 11310-90: Asbestos cement pipes and couplings. Methods of test
GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements
GOST 1180-71: Zinc anodes. Specifications
GOST 12.2.002-91: Occupational safety standards system. Agricultural machinery. Methods of safety evaluation.
GOST 12.4.091-80: Plastic miner's helmets
GOST 12.4.162-85: Occupational safety standards system. Industrial polymeric boots for protection from mechanical effect. General technical requirements. Test methods
GOST 1208-73: Pressed bronze tubes
GOST 1208-90: Pressed bronze tubes
GOST 13206-78: Ellipsoid reflector for searchlight railway signal lights. Specification
GOST 13448-82: Plastic ventilation grilles. Technical conditions
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 13996-84: Facade ceramic tiles and carpets thereof. Specifications
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 14286-69: Wrenches for fire connecting equipment. Specifications
GOST 14839.13-69: Industrial explosives. Method of waterproofness determination
GOST 14839.18-69: Industrial explosives. Methods of density determination
GOST 14906-77: Fluoroplastic-4D. Specifications
GOST 1525-91: Rods of monel. Specifications
GOST 15613.1-84: Glued massive wood. Methods for determination of glued joint of ultimate strength while shearing palong grain
GOST 15613.2-77: Massive glued wood. Method for determination of glued joint cleavage strength
GOST 15613.3-77: Massive glued wood. Method for determination of ultimate strength in tension of glued butt joint
GOST 15885-77: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 16136-80: Thermal insulating Perlite bitumen slabs. Specifications
GOST 16475-81: Polyvinylchloride floor tiles. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17000-71: Packaging consumer, of polymers, for lubricants. Specification
GOST 17005-82: Wooden laminated structures. Methods to determinate water-stability of adhesive joints
GOST 17041-77: Rulers for drawing instruments. Specifications
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17177.10-81: Heat insulating construction materials and products. The method for determination of compression strength
GOST 17177.11-81: Heat insulating construction materials and products. The method for determining the ultimate bend strength
GOST 17177.15-81: Heat insulating construction materials and products. Method for determining the linear shrinkage temperature
GOST 17177.1-81: Heat insulating construction materials and products. Methods for determining size and appearance
GOST 17177.2-81: Heat insulating construction materials and products. Methods for determining the correctness of geometric shapes
GOST 17177.3-81: Heat insulating construction materials and products. Method for determination of density
GOST 17177-87: Heat insulating construction materials and products. Methods of control
GOST 17358-80: Polymeric returnable boxes for bottles with food liquids. Specifications
GOST 17580-82: Wooden laminated structures. Method to determinate stability of glued joints against cyclic temperature- and humidity influences
GOST 17612-89: Ceramic acid-resistant pocking rings. Specifications
GOST 1786-88: Friction linings. Specifications
GOST 1789-70: Beryllium bronze strips and ribbons. Specifications
GOST 18066-72: Laminated glued wood. Method of determining bending ability
GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification
GOST 1824-88: Elements and assembly units of upper wooden construction of bridging parks. General specifications
GOST 18351-73: Magnesium alloy extruded rods. Specifications
GOST 18491-90: Spectacle frames for corrective eye glasses
GOST 18599-83: Polyethylene pressure pipes
GOST 18623-82: Cast ceramic tiles and carpets thereof
GOST 18631-87: Sound pick-up heads. General specifications
GOST 1908-82: Condenser paper. General specifications
GOST 19177-81: Rubber porous sealing gaskets
GOST 19246-82: Sheets and slabs from rolled slag-cobalt. Specification
GOST 19316-73: Centrifugal moulds. Specifications
GOST 19609.20-89: Concentrated kaolin. Method for determination of shrinkage
GOST 19921-74: Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 19922-74: Wood. Glued and bent blanks
GOST 19946-74: Dies for casting of non-ferrous alloys. Specifications
GOST 20182-74: Glued asbestos-cement constructions. Method for determination of glued joints shear strength
GOST 20386-74: Bottom boards. Specifications
GOST 20492-87: Tape recorder cassette. General specifications
GOST 21174-75: Prestressed reinforced concrete sleepers for the wide-gauge tramways
GOST 21291-75: Coal briquettes. Method for the determination of width of the belt edge
GOST 21523.11-79: Modified wood. Method of density determination
GOST 21523.8-87: Modified wood. Method for determination of modulus of elasticity in compression
GOST 21554.1-81: Sawn timber and blanks. Methods for determination of modulus of elasticity in static bending
GOST 21554.2-81: Sawn timber and blanks. Method for determination of ultimate strength in static bending
GOST 21554.5-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain
GOST 21554.6-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in shearing parallel to grain
GOST 21554.7-78: Sawn timber and semi-manufactures. Method of determination of ultimate strength in bearing perpendicular
GOST 21836-88: Sight glasses for industrial units. Specifications
GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications
GOST 22290-76: Vitreous silica transparent glass. Crystallization stability test method
GOST 22292-76: Silica transparent glass. The method for determination of stability to darkening after thermal treatment
GOST 22357-87: Figure skates. General specifications
GOST 22358-87: Racing and hockey skates. General specifications
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 22379-77: Gauze cotton-wool products. Specification
GOST 22524-77: Glass density bottles. Specifications
GOST 22685-77: Forms for making control samples of concrete. Specification
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23404-86: Lightweight enclosure panels with foam plastic thermal insulation. Method of determining modulus of elasticity and shear modulus of foam plastic
GOST 23496-86: Endoscopes with fiber optics. General specifications
GOST 23932-79: Laboratory glassware and equipment. General technical requirements
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 23982-85: Fertilizing machinery
GOST 23987-80: Canal excavators. Test methods
GOST 24039-80: Seal sheet materials, asbestos polymer. Method of measurements of sizes and density
GOST 24145-80: Domestic containers for bread. General specifications
GOST 24301-80: Bronze and brass cast bars and tubes. Technical conditions
GOST 24586-90: Soils. Laboratory methods for determining strength and strain characteristics of frozen soils
GOST 24641-81: Cable sheaths of lead and aluminium
GOST 24866-81: Sealed insulating glass units. Specifications
GOST 24866-89: Sealed insulating glass units
GOST 25015-81: Plastics cellular and foam rubber. Method for measuring linear dimensions
GOST 25130-82: Luminescent fire protective wood coating. Technical requirements
GOST 25493-82: Rocks. Method for determination of specific heat and temperature conductivity coefficient
GOST 25499-82: Rocks. Method for determination of coefficient of thermal conductivity
GOST 25579-83: Modified wood. Method for determination of dimensions stability
GOST 25640-83: Foam rubber products for industrial, agricultural and transport mechanical engineering specifications
GOST 25665-83: Phosphates fire protective steel coating of the mineral fibres. Technical requirements
GOST 25884-83: Glue laminated wood structures. Method of determination of the interlayer strength of the glue joints
GOST 25885-83: Glue laminated wood structures. Method of determination of the interlayer strength of the wood materials with wood glue joints
GOST 25966-83: Agricultural pedigree cattle. Methods of determination of productivity parameters of horned cattle of milk and combined directions
GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications
GOST 26157-84: Taking lenses. General specifications
GOST 26220-84: Aerosol aluminum mono-block bulbs
GOST 26231-84: Wild rose seedlings. Specifications
GOST 26429-85: Steel structures of suspended transport tracks. Specifications
GOST 26450.0-85: Rocks. General requirements for sampling and sample preparation for determination of collecting properties
GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications
GOST 26518-85: Soils. A laboratory method for determining of the strength and deformation characteristics by the triaxial compression tests
GOST 26584-85: Motorcycle helmets
GOST 26816-86: Cement-bonded wood boards. Specifications
GOST 27019-86: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties
GOST 27072-86: Diagnostic acoustic generators of signals. Audiometers
GOST 27180-86: Ceramic tiles. Test methods
GOST 27321-87: Demountable tubular scaffold for construction works. Specification.
GOST 27324-87: Returnable polymeric boxes. General specifications
GOST 27356-87: Synthetic materials for low soling. Method of determination of hardness under static bending
GOST 27610-88: Evergreen foliage tree and shrub seedlings. Specifications
GOST 27635-88: Sortal rose and lilac seedling. Specifications
GOST 27637-88: Semi-finished products of wrought aluminium thermo-hardened alloys. Control of microstructure for presence of overburning by metallographic method
GOST 27820-88: Elements, products of wood and wooden materials. Method for determining resistance to wear of protective and decorative coatings
GOST 28015-89: One-layer wooden floor panels. Technical requirements
GOST 28055-89: Tree and shrub planting stock. Garden and architectural forms. Specifications
GOST 28679-90: Steam-water heaters for heat supply systems
GOST 28829-90: Seedlings of decorative trees and bushes in containers. Specification
GOST 3056-90: Casein glue powder. Specifications
GOST 3317-90: Seedlings of trees and shrubs. Specifications
GOST 3548-79: Photographic film spool 61,5 mm wide. Specifications
GOST 3579-89: Seedlings of lavender. Specifications
GOST 3814-81: Texfile fabrics. Methods for the determination of falling out
GOST 3916.1-89: Plywood with outer layers of deciduous veneer for general use. Specifications
GOST 3916.2-89: Plywood with outer layers of coniferous veneer for general use. Specifications
GOST 4070-83: Refractory products and materials. Test methods. Determination of strain under load at high temperatures
GOST 4442-72: Strips and bands of lead brass. Specifications
GOST 4515-81: Copper-phosphorus alloy. Specifications
GOST 473.7-81: Chemically resistant and heat resistant ceramic wapes. The method for determination of tensile strength
GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes
GOST 5541-76: Corking means
GOST 5627-87: Automatic wire nail machines. Parameters and dimensions. Norms of accuracy
GOST 5709-86: Paper used for cigarettes
GOST 6128-81: Metal cans for chemical products
GOST 6266-89: Gypsum plasterboards. Specifications
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST 6557-89: Rubber rings for connection fitting. Specifications
GOST 6799-80: Glass for furniture. Specifications
GOST 7498-75: Fire hydraulic elevator. Specifications
GOST 7838-75: Closing plugs for hunting cartridges of calibres 10, 12, 16, 20, 28 and 32. General specifications
GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods
GOST 8.406-80: State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means
GOST 8.439-81: State system for ensuring the uniformity of measurements. Water flow rate in closed conduits. Technique of measuring by velocity-area method
GOST 8.549-86: The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with non-specified tolerances
GOST 8142-89: Rail soles for R18, P24, P33 rail types
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements
GOST 8747-83: Asbestos-cement products. Methods of tests
GOST 8894-86: Glass pipes and shaped parts thereto
Technical requirements
GOST 9.505-86: Unified system of corrosion and ageing protection. Inhibitors of acid corrosion. Methods of testing the protective ability during acid pickling of metals
GOST 9.712-86: Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesive bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid aggressive media
GOST 9371-90: Timber laminated switch sleepers for wide rail track. Specifications
GOST 9506.1-74: Brushes for electrical machines. The method for determination of sizes
GOST 9626-90: Laminated glued wood. Method for determination of impact viscosity in bending
GOST 9639-71: Sheets from unplasticized polyvinylchloride (sheet vinyplast). Specifications
GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests
GOST 9933-75: Absolute pressure gauges and u-tubes combined pressure vacuum gauges
GOST R 51669-2000: Pit hydraulic props. Test methods
GOST R 51670-2000: Armoured faze conveyors. Test methods
MI 1740-87: State system for ensuring uniformity of measurements. Viscometer for determining the conditional viscosity of paints VZ-246. Method of verification
MI 1782-87: GSI. Calibration procedure
MI 1875-88: Guidelines. State system for ensuring uniformity of measurements. Plates are plane-parallel glass. Method of verification
MI 936-85: Guidelines. State system for ensuring uniformity of measurements. Measures the length of the stroke model of the 3rd category (meters-comparators). Method of verification
MU 34-70-034-83: Guidelines for disassembling, inspecting and measuring the elements of cable samples with impregnated paper insulation for a voltage of 1 - 35 kV
OST 113-03-4001-90: Nickel-chromium catalysts.
RD 34.20.322-89: Procedural Guidelines for Inspection of Smokestacks with Metal Gas Discharge Flues
RD 34.21.341: Procedural Guidelines for Scope and Schedule for Operational Monitoring of Condition of Hydraulic Structures at Hydroelectric and Thermal Power Stations
RD 50-482-84: Procedural Guidelines. Tensile-Testing Machines and Universal Machines for Static Testing of Metals and Structural Plastics. Verification Methods
RD 52.08.24-84: Conservation of Nature. Hydrosphere. Methodical instructions. Rules for keeping records of surface waters. Monitoring the correctness of the accounting of surface land waters in quantitative terms. State Hydrological Institute (GGI)
RST RSFSR 131-87: Metal folding beds. Technical conditions
RST RSFSR 161-88: Cooper products. General technical conditions
RST RSFSR 328-89: Metal stationery cabinets. General technical requirements
RST RSFSR 38-87: Paper wire clips. Technical conditions
RST RSFSR 391-86: The pencils. General technical conditions
RST RSFSR 392-86: Pencil pencil. General technical conditions
RST RSFSR 56-81: Duga harness. General technical conditions
RST RSFSR 608-79: Mushrooms Fresh cultivated champignons. Technical conditions
RST RSFSR 624-88: Fresh green onions. Technical conditions
RST RSFSR 644-80: Prosthetic and Orthopedic Products. General Technical Specifications
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
RST RSFSR 657-81: Siberian fresh apples. Technical conditions
RST RSFSR 658-81: Fresh Siberian pears. Technical conditions
RST RSFSR 678-82: Cast-iron stoves. General technical conditions
RST RSFSR 736-86: Crutches and Canes. Technical Specifications
RST RSFSR 748-88: Parsley fresh. Technical conditions
RST RSFSR 749-88: Fresh celery. Technical conditions
RTM 16.689.169-75: Explosion-proof and mine electrical equipment repair
SanPiN 42-125-4148-86: Sanitary rules and regulations for the production and sale of games and toys
TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 301-05-17-89: Fluoroplast-40
TU 3-1002-77: Corrosion-resistant high-strength spring wire
TU 35-1385-81: Span metal railway buildings with riding on top 18.2 - 33.6 m
TU 36-1762-84: Cable Mounts II
TU 5216-021-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided
TU 5216-024-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided
VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.