GOST 2.052-2015
ГОСТ 2.052-2015
|
|
Unified system for design documentation. Electronic geometric model of the product. General principles
Единая система конструкторской документации. Электронная геометрическая модель изделия. Общие положения
Status: Effective - Supersedes. IUS 2-2017
The standard establishes the general requirements for the implementation of electronic models of engineering products and instrument-making (hereinafter - electronic geometric models of products). On the basis of the standard it is allowed, if necessary, to develop standards that take into account
Стандарт устанавливает общие требования к выполнению электронных моделей изделий машиностроения и приборостроения (далее - электронных геометрических моделей изделий). На основе стандарта допускается, при необходимости, разрабатывать стандарты, учитывающи
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
8/30/2016
SKU: RUSS236348
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
01 General. Terminology. Standardization. Documentation »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.1 Ensuring product quality at stage of technical preparation of production »
2.1.1 Design preparation of production »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T52 Design Documentation System »
The Document is Replaced With:
GOST 2.052-2021: Unified system for design documentation. Electronic model of the product. General Provisions
As a Replacement Of:
GOST 2.052-2006: Unified system for design documentation. Electronic model of product. General
The Document References:
GOST 2.051-2013: Unified system for design documentation. Digital documents. General principles
GOST 2.058-2016: Unified system for design documentation. Rules for the implementation of the requisite part of electronic design documents
GOST 2.101-2016: Unified system for design documentation. Unified system for design documentation
GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation
GOST 2.103-2013: Unified system for design documentation. Stages of designing
GOST 2.109-73: Unified system for design documentation. Basic requirements for drawings
GOST 2.305-2008: Unified system for design documentation. Images - appearance, sections, profiles
GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 2.316-2008: Unified system for design documentation. Rules for placing of inscriptions, technical data and tables of graphical documents. General principles
GOST 2.317-2011: Unified system for design documentation. Axonometric projections
The Document is Referenced By:
GOST 2.055-2014: Unified system for design documentation. Electronic specification. General provisions
GOST 2.056-2014: Unified system for design documentation. Electronic model of a detail. General provisions
GOST 2.057-2014: Unified system for design documentation. Electronic model of assembly unit. General provisions
GOST 2.103-2013: Unified system for design documentation. Stages of designing
GOST 2.118-2013: Unified system for design documentation. Technical proposal
GOST 2.119-2013: Unified system for design documentation. Preliminary design
GOST 2.120-2013: Unified system for design documentation. Technical design
GOST 2.317-2011: Unified system for design documentation. Axonometric projections
GOST 3.1116-2011: Unified system for technological documentation. Norm control
GOST 34233.12-2017: Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer
GOST R 15.000-2016: System of product development and launching into manufacture. Basic provisions
GOST R 2.057-2019: Unified system of design documentation. Electronic model of an assembly unit. General Provisions
GOST R 2.610-2019: Unified system of design documentation. Rules for the implementation of operational documents
GOST R 21.101-2020: System of design documents for construction. Basic requirements for design and working documentation
GOST R 55386-2012: Intellectual property. Terms and definitions
GOST R 56874-2016: Control system of full life cycle of products of highly technological industries. Requirements to the organization of operations on development of electronic designer documents at a development cycle of the working designer documentation for manufacture of pre-production models. General provisions
GOST R 57412-2017: Computer models of product in design, manufacturing and maintenance. General
GOST R 57700.10-2018: Numerical modeling of physical processes. Determination of stress-strain state. Verification and validation of numerical models of complex structural elements in the elastic region
GOST R 57700.15-2018: Numerical modeling of physical processes. Numerical simulation of laminar flows of viscous liquids and gases. Software validation
GOST R 57700.5-2017: Numerical modeling of physical processes. Terms and definitions in the field of mechanics for flows in porous medium
GOST R 57700.6-2017: Numerical modeling of physical processes. Terms and definitions for numerical meshless methods
GOST R 57700.9-2018: Numerical modelling of physical processes. Numerical simulation of laminar flows of viscous liquids and gases. Software verification
GOST R 58054-2018: Aircraft items. Configuration management. General
GOST R 58301-2018: Product data management. Electronic layout of the product. General requirements
GOST R 58849-2020: Civil aviation equipment. The order of creation. Key Points
GOST R 59189-2020: Electronic design documentation. Using the JT format to represent the structure and geometric models of a product
RD 92-0115-87: Position. Normative control of documentation
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.