GOST 20295-74
ГОСТ 20295-74
|
|
Steel welded pipes for main gas and oil pipelines
Трубы стальные сварные для магистральных газонефтепроводов
Status: Not effective - Superseded
The standard applies to steel welded longitudinal and spiral welded pipes with a diameter of 159 - 820 mm, used for the construction of gas and oil pipelines, oil pipelines, process, field and other pipelines, compressor
Стандарт распространяется на стальные сварные прямошовные и спиральношовные трубы диаметром 159 - 820 мм, применяемые для сооружения магистральных газонефтепроводов, нефтепродуктопроводов, технологических, промысловых и других трубопроводов, компрессорных
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
11/19/1974
SKU: RUSS236710
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
The Document is Replaced With:
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
The Document References:
GOST 1.9-67: State System of Standardization. State Quality Mark. Form, dimensions and application rules
GOST 10006-80: Metal pipes
GOST 1050-74: High-grade constructional carbon steel
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 12344-78: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-80: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-66: Steels (alloyed and highly alloyed). Methods for determining the content of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-66: Steels (alloyed and highly alloyed). Methods for determining the content of vanadium
GOST 12352-66: Steels (alloyed and highly alloyed). Method for the determination of the content of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-66: Steels (alloyed and highly alloyed). Methods for determination of molybdenum content
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-66: Steels (alloyed and highly alloyed). Method for determination of titanium content
GOST 12357-66: Steels (alloyed and highly alloyed). Methods for determining aluminum content
GOST 12358-66: Steels (alloyed and highly alloyed). Methods of the determination of arsenic content
GOST 12359-66: Steels (alloyed and highly alloyed). Methods for determination of nitrogen content
GOST 12360-66: Steels (alloyed and highly alloyed). Methods for determination of boron content
GOST 12361-66: Steels (alloyed and highly alloyed). Method for the determination of the content of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-66: Steels (alloyed and highly alloyed). Method for the determination of the content of cerium
GOST 12365-66: Steels (alloyed and highly alloyed). Method for determination of zirconium content
GOST 1497-73: Metals. Tensile test methods
GOST 19281-73: Low alloyed sorted and shaped steel
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 2.115-70: Specifications. The procedure for coordination, approval and state registration
GOST 20560-75: Alloy and high-alloy steels. General requirement for methods of chemical analysis
GOST 22536.0-77: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.13-77: Carbon steel and unalloyed cast iron. Methods of spectral analysis
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
The Document is Referenced By:
VSN 51-3-85: Design of field steel pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.