GOST 2176-77
ГОСТ 2176-77
|
|
High-alloy steel castings with special qualities. General specifications
Отливки из высоколегированной стали со специальными свойствами. Общие технические условия
Status: Not effective - Superseded
The standard applies to castings made of corrosion-resistant, heat-resistant, wear-resistant and cavitation-resistant steel.
Стандарт распространяется на отливки, изготавливаемые из коррозионностойкой, жаропрочной, износостойкой и кавитационностойкой стали.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
7/8/1977
SKU: RUSS238105
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V8 Casting of various metals »
V83 Castings with special properties (cast iron and steel) »
The Document is Replaced With:
GOST 977-88: Steel castings. General specifications
As a Replacement Of:
GOST 2176-67: High-alloy steel castings with special qualities. Grades and technical requirements
The Document References:
GOST 10145-62: Metals. Stress-rupture test method
GOST 11150-75: Metals. Tensile Test Method at Low Temperatures
GOST 12344-66: Steels (alloyed and highly alloyed). Method for determination of carbon content
GOST 12345-66: Steels (alloyed and highly alloyed). Sulphur content determination method
GOST 12346-66: Steels (alloyed and highly alloyed). Method for the determination of silicon content
GOST 12347-66: Steels (alloyed and highly alloyed). Method for the determination of phosphorus content
GOST 12348-66: Steels (alloyed and highly alloyed). Methods for determination of manganese content
GOST 12349-66: Steels (alloyed and highly alloyed). Methods for determining the content of tungsten
GOST 12350-66: Steels (alloyed and highly alloyed). Method for determination of chromium content
GOST 12351-66: Steels (alloyed and highly alloyed). Methods for determining the content of vanadium
GOST 12352-66: Steels (alloyed and highly alloyed). Method for the determination of the content of nickel
GOST 12354-66: Steels (alloyed and highly alloyed). Methods for determination of molybdenum content
GOST 12355-66: Steels (alloyed and highly alloyed). Methods of the determination of copper content
GOST 12356-66: Steels (alloyed and highly alloyed). Method for determination of titanium content
GOST 12357-66: Steels (alloyed and highly alloyed). Methods for determining aluminum content
GOST 12359-66: Steels (alloyed and highly alloyed). Methods for determination of nitrogen content
GOST 12360-66: Steels (alloyed and highly alloyed). Methods for determination of boron content
GOST 12361-66: Steels (alloyed and highly alloyed). Method for the determination of the content of niobium
GOST 12364-66: Steels (alloyed and highly alloyed). Method for the determination of the content of cerium
GOST 1497-73: Metals. Tensile test methods
GOST 2009-55: Castings, steel, shaped. Allowed deviations for the dimensions and weight and allowances for machining
GOST 3212-57: Casting patterns. Molding slopes
GOST 6032-75: Steel and alloys. Test methods for intergranular corrosion of ferritic, austenitic-martensitic, austenitic-ferritic and austenitic corrosion-resistant steels and alloys on an iron-nickel basis
GOST 6130-71: Metals and method of determining their heat resistance
GOST 7565-73: Steel and alloys. Sampling for determination of chemical composition
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9454-60: Metals. Method for determination of impact strength at normal temperature
GOST 9455-60: Metals. Method for determination of impact strength at low temperature
GOST 9456-60: Metals. Method for determination of impact strength at high temperature
The Document is Referenced By:
GOST 10194-78: The wedge gate valves with sliding spindle steel on Pd approximately 1.6 MPa (16 kgf / cm2). Specification
GOST 10738-76: The wedge gate valves with sliding spindle steel on Pd approximately 2.5 MPa (25 kgf / cm2). Specification
GOST 12375-70: Single-rotor crushers for coarse grinding
GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications
GOST 12495-77: Refrigerators, grate. Specification
GOST 12822-67: Flanges with a ledge or hollow, cast steel. Design, dimensions and technical requirements
GOST 12823-67: Flanges with a spike or groove cast of steel. Design, dimensions and technical requirements
GOST 12824-67: Flanges for the lens gasket, cast steel. Design, dimensions and technical requirements
GOST 12825-67: Flanges for lens oval sectional lining of cast steel. Design, dimensions and technical requirements
GOST 17535-77: Metal high precision parts of devices. Dimension stabilisation by heat treatment. Typical technological processes
GOST 18581-73: Check valves reverse flanged from corrosion-resistant steel to PN 4 MPa (40 kgf / cm2). Specification
GOST 18584-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 16 MPa (160 kgf / cm2). Specification
GOST 19740-74: Vertical centrifugal pumps
GOST 20572-83: Two-screw pumps and pump units. Specification
GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements
GOST 22446-77: Shut-off valves made of corrosion protection iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification
GOST 23229-78: Shut-off valves made of corrosion-resistant steel for Pd 4 MPa (40 kgf / cm2). Specification
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 7090-72: Single-rotor hammer crushers
GOST 977-88: Steel castings. General specifications
R 4.054.103-89: Instrument parts are precision metal. Stabilization of sizes by heat treatment. Typical Processes
RD 50-9.645-87: Guidelines. General requirements for the selection of metals and alloys used without coatings in atmospheric conditions
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.