GOST 22733-2016
ГОСТ 22733-2016
|
|
Soils. Laboratory method for determination of maximum density
Грунты. Метод лабораторного определения максимальной плотности
Status: Effective - Supersedes. IUS 12-2016
This standard applies to assembly units and parts of pipelines according to GOST 22791-83 - GOST 22826-83 and establishes requirements for assembly units and parts of pipelines for the petrochemical industry and for the production of mineral fertilizers. 10 to 100 MPa (over 100 to 1000 kgf
Стандарт распространяется на глинистые, песчаные и гравийные грунты и устанавливает метод лабораторного определения максимальной плотности скелета грунта и оптимальной влажности грунта, используемых при назначении требуемой плотности грунтов, а также при контроле влажности уплотняемых грунтов и качества уплотнения их в земляных сооружениях и основаниях зданий и сооружений. Стандарт не распространяется на грунты, содержащие более 30 % зерен крупнее 10 мм, а также на заторфованные грунты.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/28/2016
SKU: RUSS238920
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.50 Foundations and foundations of buildings and structures »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
1 Basic provisions of product testing and control system »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.01 Soil quality and soil science in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.01 Soil quality and soil science in general »
As a Replacement Of:
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
The Document References:
GOST 1.0-2015: Interstate system for standardization. Basic principles
GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation
GOST 12071-2014: Soils. Sampling, packing, transportation and keeping of samples
GOST 166-89: Vernier callipers. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25100-2011: Soils. Classification
GOST 29329-92: Balance for static weightings
GOST 30416-2012: Soils. Laboratory testing. General requirements
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
The Document is Referenced By:
GOST 12071-2014: Soils. Sampling, packing, transportation and keeping of samples
GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters
GOST 25584-2023: Soils. Methods of laboratory determination of filtration coefficient
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST R 58397-2019: General automobile roads. Rules for the production of work. Conformity assessment
GOST R 70037-2022: Public roads. Geosynthetic materials. Test methods for determining the pulling resistance of geosynthetic materials from the ground
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
ODM 218.2.086-2019: Guidelines for geocryological forecasting of the stability of road structures in the design, construction and operation of roads
ODM 218.2.094-2018: Guidelines for the design of the subgrade of the public roads from the local thawed and frozen wet clay and peat soils in areas of permafrost
ODM 218.2.095-2019: Guidelines for the design of subgrade permafrost using local soils
ODM 218.3.1.002-2020: Typical technical solutions for embankments on pile foundations with a flexible grillage made of geosynthetic materials
ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
PNST 269-2018: Automobile roads of general use. Geosynthetic materials for road construction. Method for determination of filtration coefficient for the system «soil-geosynthetic material-soil»
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
PNST 324-2019: General automobile roads. Soils. Determination of optimum humidity and maximum density by the Proctor method
PNST 338-2018: General automobile roads. Subgrade. Methods for determining geometric and physical parameters
PNST 371-2019: Public roads with low traffic density. Road clothes. Design and calculation
SP 23.13330.2011: Foundation of hydraulic structures
SP 23.13330.2018: Foundations of hydraulic structures
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 342.1325800.2017: Protection of railway track and structures from the adverse natural phenomena. Rules of engineering and construction
SP 381.1325800.2018: Retaining structures. Design rules
SP 445.1325800.2023: Culverts and drainage systems in permafrost areas. Design rules
SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work
SP 45.13330.2017: Earthworks, grounds and footings
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.