GOST 22790-83
ГОСТ 22790-83
|
|
Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
Сборочные единицы и детали трубопроводов на Ру св. 10 до 100 МПа (св. 100 до 1000 кгс/см2). Общие технические условия
Status: Not effective - Superseded. IUS 10-1989
This standard applies to assembly units and parts of pipelines according to GOST 22791-83 - GOST 22826-83 and establishes requirements for assembly units and parts of pipelines for the petrochemical industry and for the production of mineral fertilizers. 10 to 100 MPa (over 100 to 1000 kgf
Настоящий стандарт распространяется на сборочные единицы и детали трубопроводов по ГОСТ 22791-83 — ГОСТ 22826-83 и устанавливает требования к сборочным единицам и деталям трубопроводов для отраслей нефтехимической промышленности и для производства минеральных удобрений, на Ру св. 10 до 100 МПа (св. 100 до 1000 кгс/см2) и Dу от 6 до 200 мм при температуре среды от минус 50 до плюс 510 °С.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/25/1983
SKU: RUSS238969
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document is Replaced With:
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
As a Replacement Of:
GOST 22790-77: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General technical requirements
The Document References:
GOST 10006-80: Metal pipes
GOST 10198-78: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10354-82: Polyethylene film Specifications
GOST 1050-74: High-grade constructional carbon steel
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners
GOST 14192-77: Marking of cargoes
GOST 1497-73: Metals. Tensile test methods
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16295-77: Packaging paper, anticorrosive. Specification
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 20072-74: Heat-resistant steel
GOST 21105-75: Non-destructive testing. Method of magnetic particle testing
GOST 21140-75: Package. System of dimensions
GOST 22791-83: Assembly units and pipeline parts. Dead lenses with indicator for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22792-83: Assembly units and pipeline parts. Unions for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22793-83: Assembly units and pipeline parts. Bend arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22794-83: Assembly units and pipeline parts. Flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22795-83: Assembly units and pipeline parts. Abutment and flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22796-83: Assembly units and pipeline parts. Unequal flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22797-83: Assembly units and pipeline parts. Abutment for bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22798-83: Assembly units and pipeline parts. Flanged double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22799-83: Assembly units and pipeline parts. Flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22800-83: Assembly units and pipeline parts. Armed and flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22801-83: Assembly units and pipeline parts. Flanged reducing and open branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22802-83: Assembly units and pipeline parts. Flanged and armed open T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22803-83: Assembly units and pipeline parts. Flanged asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22804-83: Assembly units and pipeline parts. Flanged reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22805-83: Assembly units and pipeline parts. Flanged inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22806-83: Assembly units and pipeline parts. Flanged fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22807-83: Assembly units and pipeline parts. Flanged lens metering diaphragms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions
GOST 22808-83: Assembly units and pipelines parts. Flanged lens arms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions
GOST 22809-83: Assembly units and pipeline parts. Flanged lenses with two arms for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22810-83: Assembly units and pipeline parts. Pocket angles for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22811-83: Assembly units and pipeline parts. Arms for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22812-83: Assembly units and pipeline parts. Pockets for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22813-83: Assembly units and pipeline parts. Reducing flanges for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22814-83: Assembly Units and Pipeline Parts. Armed reducing flanges. For Pn above 10 to 40 МPа
. ( above 100 tо 400 кgf/сm2)
GOST 22815-83: Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22816-83: Assembly units and pipeline parts. Flanged plugs with inserts for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22817-83: Assembly units and pipeline parts. Flanged bent arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22818-83: Assembly units and pipeline parts. Elbow bends with abutments for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22819-83: Assembly units and pipeline parts. Double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22820-83: Assembly units and pipeline parts. Angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22821-83: Assembly units and pipeline parts. Armed angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22822-83: Assembly units and pipeline parts. Reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22823-83: Assembly units and pipeline parts. Open armed T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22824-83: Assembly units and pipeline parts. Asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22825-83: Assembly units and pipeline parts. Inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 2991-76: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4543-71: Structural alloyed steel
GOST 515-77: Bitumized and tarred packaging paper
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6032-75: Steel and alloys. Test methods for intergranular corrosion of ferritic, austenitic-martensitic, austenitic-ferritic and austenitic corrosion-resistant steels and alloys on an iron-nickel basis
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.