imgalt

GOST 27772-2015

ГОСТ 27772-2015

Structural steel structure rolled products. General specifications

Прокат для строительных стальных конструкций. Общие технические условия

Status: Effective - Supersedes. IUS 11-2016

The standard applies to hot-rolled sheet, broadband universal, shaped steel and curved sections made of hot-rolled sheet metal, intended for building steel structures with welded and other joints.

Стандарт распространяется на горячекатаный листовой, широкополосный универсальный, фасонный прокат и гнутые профили, изготовленные из горячекатаного листового проката, предназначенные для строительных стальных конструкций со сварными и другими соединениями.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 4/7/2016

SKU: RUSS241480

Price: $247.00


National keywords: гарантии изготовителя; испытания; испытания и контроль; классификация; контроль; металлопродукция; металлургическая продукция; металлургия; металлы; металлы и металлические изделия; метизы; методика контроля и оценки механических свойств проката; методы контроля; механические свойства; правила приемки; продукция из чугуна и стали; продукция металлургической промышленности; прокат горячекатаный листовой; прокат стального листа; сортамент; сталь углеродистая обыкновенного качества; стальной листовой прокат и полуфабрикаты; стальные полуфабрикаты; стальные профили; строительство; термины и определения; техническое регулирование; требования безопасности и охраны окружающей природной среды; фасонный и гнутые профили проката для строительных стальных конструкций; химический состав стали; широкополосный универсальный;

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.70 Steel profiles »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.70 Steel profiles »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V20 Classification, nomenclature and general rules »


The Document is Replaced With:

GOST 27772-2021: Rolled steel for building steel structures. General technical conditions

As a Replacement Of:

GOST 27772-88: structural steel structure rolled products. General specifications

The Document References:

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation

GOST 10551-75: Steel roll-formed corrugated sections. Range

GOST 11474-76: Bent-steel sections. Specifications

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 13229-78: Steel bent Z-shaped sections. Dimensions

GOST 14019-2003: Metallic materials. Bend test method

GOST 14635-93: Special roll-formed steel sections for railway car building

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 1497-84: Metals. Methods of tension test

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions

GOST 19771-93: Roll-formed steel equal leg angles. Dimensions

GOST 19772-93: Roll-formed steel unequal les angles. Dimensions

GOST 19903-2015: Hot-rolled sheet. Range

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications

GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage

GOST 7566-94: Metal products

GOST 8239-89: Steel hot-rolled I-beams

GOST 8240-97: Hot-rolled steel channels. Assortment

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8278-83: Roll-formed steel equal channels. Dimensions

GOST 8281-80: Roll-formed steel unequal channels Dimensions

GOST 8282-83: Bent-steel С-shaped equal flange sections. Dimensions

GOST 8283-93: Bent steel hat equal profiles

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions

GOST 8568-77: Corrugated steet rhombic and lentil form steel. Technical requirements

GOST 9234-74: Steel bent sheet sections with trapezoid-shaped corrugation. Dimensions

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

The Document is Referenced By:

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 21.502-2016: System of building design documents. Rules for the implementation of working documentation for metal structures

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST IEC 62841-2-1-2019: Electric, manual, portable and garden machines. Safety and test methods. Part 2-1. Particular requirements for manual drilling and hammer drilling machines

GOST R 12.3.050-2017: Occupational safety standards system. Construction. Works at height. Safety regulations

GOST R 12.3.051-2017: Occupational safety standards system. Construction. Design of protective and trapping grids. Specifications

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications

GOST R 58336-2018: Anchor angles. Test methods

GOST R 58599-2019: Technical diagnostics. Diagnostics of steel structures. Magnetic coercimetric method. General requirements

GOST R 58622-2019: The main pipeline transport of oil and oil products. Methodology for assessing the strength, stability and durability of a vertical steel tank

GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications

GOST R 70571-2022: Welded steel T-beams with transversely corrugated wall for building structures. Range

Letter 15153/05-DG: About the application of the standards

ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules

SP 266.1325800.2016: Composite steel and concrete structures. Design rules

SP 267.1325800.2016: High rise buildings and complexes. Design rules

SP 294.1325800.2017: The construction of steel. Design rules

SP 338.1325800.2018: High-speed railways noise protection. Design and construction regulations

SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction

SP 359.1325800.2017: Vertical cylindrical steel silos for bulk products storaging. Design rules

SP 369.1325800.2017: Fixed offshore platforms. Design principles

SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules

SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules

SP 494.1325800.2020: Spatial metallic coatings. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!