imgalt

GOST 30673-2013

ГОСТ 30673-2013

Polyvinylchloride profiles for windows and doors. Specifications

Профили поливинилхлоридные для оконных и дверных блоков. Технические условия

Status: Effective - Supersedes. IUS 6-2015

The standard applies to PVC profiles used in the manufacture of window and door blocks, produced by extrusion of a composition based on unplasticized polyvinyl chloride. The standard establishes technical requirements, control methods, rules for the acceptance of profiles. The standard does not apply to profiles subjected to post-dyeing after fabrication.

Стандарт распространяется на поливинилхлоридные профили, применяемые при изготовлении оконных и дверных блоков, производимые способом экструзии из композиции на основе непластифицированного поливинилхлорида. Стандарт устанавливает технические требования, методы контроля, правила приемки профилей. Стандарт не распространяется на профили, подвергнутые после изготовления дополнительной обработке методом окрашивания.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 10/22/2014

SKU: RUSS242270

Price: $462.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.56 Windows, doors, gates and their appliances »

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.01 Rubber and plastic products in general »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.01 Rubber and plastic products in general »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh35 Constructions and parts from other materials »


As a Replacement Of:

GOST 30673-99: Polyvinylchloride profiles for windows and doors. Specifications

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11529-86: PVC materials for floors. Methods of control

GOST 15088-83: Plastics. Method of determination of the Vicat softening temperature of thermoplastics

GOST 166-89: Vernier callipers. Specifications

GOST 19111-2001: Polyvinylchloride shaped linear articles for interior finish. Specifications

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30402-96: Building materials Ignitability Test Meth

GOST 30778-2001: Rubber compression-types for windows and doors. Specifications

GOST 30973-2002: Polyvinylchloride profiles for windows and doors. Method of determination of resistance to climatic effects and estimation of life circle

GOST 31362-2007: Compression-type gaskets for window and blocks. Metnod of resistanse to exploitation effects determination

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4647-80: Plastics. Method for determination of Charpy's impact strength

GOST 5378-88: Vernier protractors. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8026-92: Levelling rules. Specifications

GOST 9416-83: Building levels. Technical requirements

GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending

GOST OIML R 76-1-2011: State system for ensuring the uniformity of measurements. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

The Document is Referenced By:

GOST 23166-2021: Translucent fencing window and balcony constructions. General specifications

GOST 23166-2024: Window and balcony blocks. General technical conditions

GOST 23747-2015: Door blocks of aluminium profiles. Specifications

GOST 30734-2020: Mansard window blocks. Specifications

GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications

GOST 30970-2023: Door blocks made of polyvinylchloride profiles. General technical conditions

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34914-2022: Windows for industrial buildings. General technical conditions

GOST R 56712-2015: Panel multilayer polycarbonate. Specifications

GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications

RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)

SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!