imgalt

GOST 31385-2016

ГОСТ 31385-2016

Vertical cylindrical steel tanks for oil and oil-products. General specifications

Резервуары вертикальные цилиндрические стальные для нефти и нефтепродуктов. Общие технические условия

Status: Effective - Supersedes. IUS 2-2017

The standard establishes requirements for the design, manufacture, installation and testing of vertical cylindrical steel tanks with a nominal volume of 100 to 120000 cubic meters, including those with a protective wall used in the extraction, transportation, processing and storage of oil and oil products, as well as to ensure mechanical and industrial safety. The requirements of the standard apply to steel structures of the tank, limited to the first flange or welded (threaded) connection of technological devices or pipelines outside the body (steel protective wall) of the tank. The standard is allowed to be used in the construction of reservoirs for storing reservoir and fire water, oil-containing effluents, liquid mineral fertilizers, food and other liquid products (subject to sanitary and hygienic standards).

Стандарт устанавливает требования к проектированию, изготовлению, монтажу и испытанию вертикальных цилиндрических стальных резервуаров номинальным объемом от 100 до 120000 м куб., в том числе с защитной стенкой, используемых при добыче, транспортировании, переработке и хранении нефти и нефтепродуктов, а также требования, направленные на обеспечение механической и промышленной безопасности. Требования стандарта распространяются на стальные конструкции резервуара, ограниченные первым фланцевым или сварным (резьбовым) соединением технологических устройств или трубопроводов снаружи корпуса (стальной защитной стенки) резервуара. Стандарт допускается применять при строительстве резервуаров для хранения пластовой и пожарной воды, нефтесодержащих стоков, жидких минеральных удобрений, пищевых и других жидких продуктов (при условии обеспечения санитарно-гигиенических норм).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 8/31/2016

SKU: RUSS242461

Price: $678.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.01 Storage tanks for liquids and gases in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.01 Storage tanks for liquids and gases in general »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh34 Metal structures and parts »


The Document is Replaced With:

GOST 31385-2023: Vertical cylindrical steel tanks for oil and petroleum products. General technical conditions

As a Replacement Of:

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

ATK 24.200.02-90: Album typical designs. Flanged steel plugs. Design, dimensions and specifications

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 14019-2003: Metallic materials. Bend test method

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 1497-84: Metals. Methods of tension test

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 19281-2014: High strength rolled steel. General specification

GOST 19903-2015: Hot-rolled sheet. Range

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 3242-79: Welded joints

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 6356-75: Petroleum products. Method of test for flash point boy closed cup

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8240-97: Hot-rolled steel channels. Assortment

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST ISO 9001-2011: Quality management systems. Requirements

Order 982-st: On the introduction into effect of the interstate standard

PB 03-273-99: Rules for qualification test of welders and welding production specialists

RD 03-606-03: Instructions for visual and measuring control

RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities

RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications

SP 11-105-97: Engineering and geological survey for construction

SP 128.13330.2012: Aluminium structures

SP 131.13330.2012: Building climatology

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 16.13330.2011: Steel structures

SP 20.13330.2011: Loads and impacts

SP 22.13330.2011: Buildings and structures foundations

SP 24.13330.2011: Pile foundations

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 47.13330.2012: Engineering survey for construction. Basic principles

SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

Decision 162: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for main pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020), and the list of international and regional (interstate) standards, and in their absence - national (state) standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On requirements for pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020) and conformity assessment of technical regulation objects

Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and

GOST 34366-2017: Main pipeline transport of oil and oil products. Quality control of construction and installation works. Main provisions

GOST 34563-2019: The main pipeline transport of oil and oil products. Rules for technological design

GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading

GOST 35054-2023: Main pipeline transportation of oil and oil products. Buildings and structures. Design rules

GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications

GOST R 58622-2019: The main pipeline transport of oil and oil products. Methodology for assessing the strength, stability and durability of a vertical steel tank

GOST R 58623-2019: The main pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Technical Operation Rules

GOST R 70203-2022: Aluminum roofs for tanks. Specifications

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 462-st: On the introduction into effect of the interstate standard

Order 982-st: On the introduction into effect of the interstate standard

Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SP 359.1325800.2017: Vertical cylindrical steel silos for bulk products storaging. Design rules

SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation

SP 43.13330.2012: Structures for industrial installations

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!