GOST 31610.32-1-2015
ГОСТ 31610.32-1-2015
|
|
Explosion hazardous media. Part 32-1. Electrostatics. Dangerous manifestations. Manual
Взрывоопасные среды. Часть 32-1. Электростатика. Опасные проявления. Руководство
Status: Effective - Introduced for the first time. IUS 11-2016
The standard provides guidance on testing the properties of equipment, products and processes necessary to prevent ignition hazards and electrostatic discharges, as well as the operational requirements necessary to guarantee the safe use of equipment, products or a process. The standard can be used in assessing the risk of electrostatic discharges or for the preparation of standards by product group or specific products for electrical and non-electric machines or equipment. The hazards associated with static electricity in industrial processes and environmental conditions that most often create dangerous situations are considered. These processes include the loading, unloading and transportation of solids, liquids, powders, gases, aerosols and explosives. In each case, the source and nature of the electrostatic hazard and recommendations for its elimination are determined. The standard does not cover static electricity hazards associated with lightning or damage to electronic components. The standard does not replace the standards applicable to specific products and industrial situations.
В стандарте приведено руководство по испытаниям свойств оборудования, продукции и процессов, необходимых для предотвращения опасности воспламенения и поражения разрядами электростатического электричества, а также эксплуатационные требования, необходимые для гарантии безопасного применения оборудования, продукции или процесса. Стандарт может применяться при оценке риска электростатических разрядов или для подготовки стандартов по товарной группе или конкретной продукции для электрических и неэлектрических машин или оборудования. Рассмотрены опасности, связанные со статическим электричеством в производственных процессах и условиях окружающей среды, наиболее часто создающих опасные ситуации. Эти процессы включают в себя погрузку, разгрузку и транспортировку твердых веществ, жидкостей, порошков, газов, аэрозолей и взрывчатых веществ. В каждом случае определяются источник и характер электростатической опасности и рекомендации по ее устранению. Стандарт не распространяется на опасности от статического электричества, связанные с молнией или повреждением электронных компонентов. Стандарт не заменяет стандарты, распространяющиеся на конкретные изделия и промышленные ситуации.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/26/2016
SKU: RUSS242516
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
012/2011 TR CU. On safety equipment for work in explosive environments »
Regulations and standards (to TR CU 012/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.20 Electrical equipment for an explosive atmosphere »
National standards »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.20 Electrical equipment for an explosive atmosphere »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E8 Lighting and X-ray »
E83 Lighting equipment and fittings »
The Document References:
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST IEC 60079-10-1-2013: Explosive atmospheres. Part 10-1. Classification of areas. Explosive gas atmospheres
GOST IEC 60079-10-2-2011: Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres
GOST IEC 60079-14-2013: Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST R 50344-92: Solid insulating materials. Methods of the determination of the insulation resistance
GOST R 50499-93: Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
GOST R 53734.2.3-2010: Electrostatics. Part 2.3. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
GOST R 53734.4.1-2010: Electrostatics. Part 4.1. Test methods for specific applications. Electrical resistance of floor covering and installed floors
GOST R 53734.4.3-2010: Electrostatics. Part 4-3. Test methods for specific applications. Footwear
GOST R EN 1149-3-2008: Occupational safety standards system. Protective clothing. Electrostatic properties. Part 3. Test methods for measurement of charge decay
GOST R EN 1149-5-2008: Occupational safety standards system. Special protective clothing. Electrostatic properties. Part 5. General specifications
GOST R IEC 60079-20-1-2011: Explosive atmospheres. Part 20-1. Material characteristics for gas and vapour. Classification. Test methods and data
The Document is Referenced By:
GOST 31610.32-2-2016: Explosive atmospheres. Part 32-2. Electrostatics hazards. Tests
GOST 35053-2023: Main pipeline transportation of oil and oil products. Provision of protection against lightning and static electricity. Basic provisions
GOST 35070-2024: Main pipeline transportation of oil and petroleum products. Linear part. Designing
GOST IEC 60034-3-2015: Electric rotary machines. Part 3. Special requirements for synchronous generators driven by steam turbines and compressed gas turbines
GOST R 56188.5.100-2023: Fuel Cell Technologies. Part 5-100. Portable fuel cell power plants. Safety
GOST R 59387-2021: Installation cables for use in electrical installations in hazardous areas, including for underground workings. General specifications
PNST 685-2023: Oil and gas industry. Underwater production systems. Explosive atmospheres. Electrostatic hazards. Testing
PNST 693-2023: Oil and gas industry. Underwater production systems. Explosive atmospheres. Electrostatic hazards. Fundamentals
SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.