GOST 32871-2014

ГОСТ 32871-2014

Automobile roads of general use. Pipes for road culvert. Technical requirements

Дороги автомобильные общего пользования. Трубы дорожные водопропускные. Технические требования

Status: Effective - Introduced for the first time. With the right to early introduction (IUS 10-2015)

The standard applies to bitumen mastics intended for waterproofing road structures, airfields and artificial structures, gluing coiled materials, filling seams and cracks in non-rigid pavements for preparing crushed stone-mastic materials for expansion joints of the deck, and establish technical requirements.

Стандарт распространяется на битумные мастики, предназначенные для гидроизоляции дорожных конструкций, аэродромов и искусственных сооружений, приклеивания рулонных материалов, заливки швов и трещин нежестких дорожных одежд, для приготовления щебеночно-мастичных материалов для деформационных швов мостового полотна, и устанавливают технические требования.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 2/27/2015

SKU: RUSS242807

Price: $279.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.68 Road materials »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.30 Road equipment and installations »

National standards » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.30 Road equipment and installations »


The Document References:

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 14192-96: Cargo marking

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 15.009-91: Non-food consumer goods

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 17624-87: Concrete. Ultrasonic method of strength determination

GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement

GOST 17769-83: Fastening details. Rules of acceptance

GOST 18105-86: Concretes. Rules for the strength control

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 31384-2008: Structural concrete protection against corrosion. General requirements

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 3640-94: Zinc. Specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B

GOST ISO 8673-2014: Hexagon regular nuts (style 1) with fine pitch thread. Product grades A and B

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

The Document is Referenced By:

GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods

GOST 33161-2014: Automobile roads of general use. Requirements for diagnostics and certification of artificial structures on highways

GOST R 58137-2018: Automobile roads of general use. Guidelines for risk assessment during the life cycle

GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation

GOST R 59290-2021: Automobile roads for general use. Requirements for conducting incoming and operational control

GOST R 59611-2021: Automobile roads for general use. Drainage system. Design requirements

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.2.110-2020: Methodical recommendations for hydraulic calculations of spiral metal corrugated pipes

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00
Water quality. Sewage water
Language: English
Price: $120.30
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English
Price: $97.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!