GOST 33211-2014
ГОСТ 33211-2014
|
|
Freight cars. Requirements for strength and dynamic properties
Вагоны грузовые. Требования к прочности и динамическим качествам
Status: Effective - Introduced for the first time. By order No. 1845-st of November 17, 2015, the date of entry into force was postponed from November 1, 2015 to July 1, 2016 (the official website of Rosstandart); IUS 2-2016
The standard applies to freight wagons (hereinafter - wagons) intended for circulation on common and non-shared railway tracks of 1,520 mm gauge, equipped with automatic couplers according to GOST 3475 and trolleys according to GOST 9246. The standard establishes requirements for strength and dynamic qualities when performing calculations and evaluation test results according to GOST 33788 for the carriage body supporting structure, fastening of the car's suspension equipment, supporting structure and fastening of the trolley's suspended equipment, components The lever lever transmission, as well as the requirements for automatic coupling of cars and the passage of curved track sections by coupled cars.
Стандарт распространяется на грузовые вагоны (далее - вагоны), предназначенные для обращения на железнодорожных путях общего и необщего пользования колеи 1520 мм, оборудованные автосцепными устройствами по ГОСТ 3475 и тележками по ГОСТ 9246. Стандарт устанавливает требования к прочности и динамическим качествам при выполнении расчетов и оценке результатов испытаний по ГОСТ 33788 для несущей конструкции кузова вагона, крепления подвесного оборудования вагона, несущей конструкции и крепления подвесного оборудования тележек, составных частей тормозной рычажной передачи, а также требования к автоматическому сцеплению вагонов и проходу сцепленными вагонами кривых участков пути.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/5/2015
SKU: RUSS242912
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.220 Transport »
03.220.30 Rail transport »
National standards »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.220 Transport »
03.220.30 Rail transport »
The Document References:
GOST 10791-2011: All-rolled wheels. Specifications
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 21447-75: Coupler contour line. Dimensions
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 25.101-83: Strength calculation and testing. Representation of random loading of machine elements and structures and statistical evaluation of results
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions
GOST 32913-2014: Draft gears of coupler and automatic coupler devices of railway rolling stock. Technical specifications and acceptance rules
GOST 33788-2016: Freight and passenger coaches. Test methods for strength and dynamic quality
GOST 3475-81: Automatic coupler equipment of railway rolling stock for railway track gauge 1520 (1524) mm. Assembling dimensions
GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications
GOST R 51685-2000: Railway rails. General specifications.
GOST R 52916-2008: Stops of automatic coupler equipment for freight and passenger cars. General specifications.
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 54749-2011: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
Minutes 15: Rules of transportation of dangerous goods by rail
PB 03-576-03: Regulations of design and safe operation of pressure vessels
TsP-774: Instructions for the current maintenance of the railway track
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
GOST 10674-2022: Tank wagons. General specifications
GOST 10935-2019: Cargo freight cars. General specifications
GOST 10935-2022: Covered freight cars. General specifications
GOST 18322-2016: Maintenance and repair system of engineering. Terms and definitions
GOST 26686-2022: Flatcars. General specifications
GOST 26725-2022: Open wagons. General technical conditions
GOST 30243.1-2021: Hopper wagons with open track 1520 mm for bulk cargo. General specifications
GOST 30243.2-2024: Covered hopper cars. General technical conditions
GOST 32700-2020: Railway rolling stock. Adhesion control methods
GOST 33683-2015: Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications
GOST 33684-2015: Polymer composite roofs for covered freight cars of 1520 mm gaugemain line railways. Specifications
GOST 33788-2016: Freight and passenger coaches. Test methods for strength and dynamic quality
GOST 33939-2016: Cast details for freight wagons’ bogies. Methods of durability testing. Part 1. Side frame
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34387-2018: Side bearings of the freight wagon bogies. General specifications
GOST 34434-2018: Brake systems for freight railcars. Technical requirements and calculation rules
GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
GOST 34502-2018: Details of cast carts of railway freight cars. Life test methods. Part 2. The beam is nadressorny
GOST 34503-2018: Wedges friction trolleys of freight cars. General specifications
GOST 34710-2021: Stops for automatic couplers of freight and passenger cars. General specifications
GOST 34759-2021: Railway rolling stock. Norms for permissible exposure of railway track and test methods
GOST 34763.1-2021: Three- and four axle bogies for railroad freight wagons. General specifications
GOST 34763.2-2021: Three- and four-axle bogies for freight wagons on railroads. Rules of acceptance and test methods
GOST 34764-2021: Dumper wagons. Strength and dynamic performance requirements
GOST 34765-2021: Hopper type freight wagons. General specifications
GOST 34772-2021: Railway transporters. Requirements for strength and dynamic performance
GOST 34937-2023: Riveted connections for railway cars. Technical requirements
GOST 35003-2023: Self-contained refrigerator cars. General technical conditions
GOST 35024-2023: Articulated freight cars. General technical conditions
GOST 4686-2012: Brake beams of brake leverage gear. Specifications.
GOST 5973-2022: Dumper cars. General specifications
GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications
GOST R 58720-2019: Carts, side frames, nadressorny beams and connecting special freight-type cars. General specifications
GOST R 59849-2021: Welded body structure joints for railway rolling stock made of aluminium alloys. Design, manufacturing, repair and quality control requirements.
GOST R 70463-2022: Four- and six-axle flatcars. General specifications
GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications
GOST R 70862-2023: Hinge, hinge holder and stops of gondola car hatch covers. General technical conditions
PNST 511-2020: Freight wagons. Calculated irregularities of the railway track for use in assessing the indicators of the dynamic qualities of freight cars by calculation methods
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.