GOST 34029-2016
ГОСТ 34029-2016
|
|
Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
Арматура трубопроводная. Арматура обратная для магистральных нефтепроводов и нефтепродуктопроводов. Общие технические условия
Status: Effective - Introduced for the first time. IUS 6-2017
The standard applies to non-return valves - non-return valves and check valves of nominal diameters from DN 50 to DN 1200 at nominal pressure from PN 1.6 to PN 12.5 MPa (from 16 to 125 bar), designed to prevent the working medium from returning in pipelines on objects of the main oil pipelines and oil product pipelines.
Стандарт распространяется на обратную трубопроводную арматуру - обратные затворы и обратные клапаны номинальных диаметров от DN 50 до DN 1200 на номинальное давление от PN 1,6 до PN 12,5 МПа (от 16 до 125 бар), предназначенные для предотвращения обратного потока рабочей среды в трубопроводах на объектах магистральных нефтепроводов и нефтепродуктопроводов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/1/2017
SKU: RUSS243378
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.4 For pipeline transport of oil and gas »
Standards for pipe fittings (TPA) »
2. Standards for general specifications »
2.3 Reverse fittings »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.50 Armature reverse and safety »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.50 Armature reverse and safety »
The Document References:
GOST 1012-2013: Aviation petrols. Specifications
GOST 10227-2013: Jet fuels. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10433-75: Fuel oil for gas-turbine plants. Specifications
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 10877-76: Preservative oil K-17
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1497-84: Metals. Methods of tension test
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25573-82: Freight handling rope slings for construction
GOST 26304-84: Industrial pipeline valves supplied
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 305-2013: Diesel fuel. Specifications
GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability
GOST 31149-2014: Paint and varnish materials. Determination of adhesion by the method of cross-cut
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 32299-2013: Paint materials. Pull-off test for adhesion
GOST 32702.2-2014: Paint materials. Determination of adhesion by X-cut test method
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions
GOST 33272-2015: System of product development and launching into manufacture. Procedure of establishment and extension of the appointed resource, service life and period of storage. Basic provisions
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 411-77: Rubber and glue. Methods for determination of metal bond strength at separation
GOST 4666-2015: Pipeline accessories. Requirements for marking
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8233-56: Steel. Microstructure standards
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9450-76: Measurements microhardness by diamond instruments indentation
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9544-2015: Pipeline valves. Leakage rates of valves
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 27.301-2011: Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 51866-2002: Automotive fuels. Unleaded petrol. Specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST R 52857.2-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic, shells convex and flat bottoms and covers
GOST R 52857.3-2007: Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 52857.5-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and heads from influence of support loads
GOST R 52857.6-2007: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads
GOST R 53442-2009: Basic norms of interchangeability. Geometrical product specifications. Tolerances of form, orientation, location and run-out
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R ISO 6507-1-2007: Metals and alloys. Vickers hardness test. Part 1. Test method
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.
PB 03-440-02: Attestation rules for nondestructive inspection personnel
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-606-03: Instructions for visual and measuring control
RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements
ST TsKBA 041-2008: Pipe fittings. Input control of materials, semi-finished products and components
ST TsKBA 043-2008: Pipe fittings. Procedure of rationing and control of reliability and safety
ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements
ST TsKBA 092-2014: Pipeline valves for trunk pipelines. Regulatory loads from pipelines. Calculation method and numerical values
The Document is Referenced By:
GOST 34612-2019: Pipe fittings. Passport. Rules for development and design
GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators
GOST R 58819-2020: Pipe fittings for trunk oil pipelines and oil product pipelines. Rules for assessing the technical condition and extension of assigned indicators
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
