Pressure - conditional, testing and working for valves and connecting parts of pipelines
Давления условные, пробные и рабочие для арматуры и соединительных частей трубопроводов
Status: Not effective - Superseded
The standard applies to valves and connecting parts of pipelines (tees, elbows, transitions, flanges, etc.) and establishes a series of nominal, test and operating pressures.
Стандарт распространяется на арматуру и соединительные части трубопроводов (тройники, колена, переходы, фланцы и др.) и устанавливает ряды условных, пробных и рабочих давлений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
8/13/1968
SKU: RUSS243774
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G10 Classification, nomenclature and general rules »
The Document is Replaced With:
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
As a Replacement Of:
GOST 356-59: Pressure - conditional, testing and working for valves and connecting parts of pipelines
The Document References:
GOST 10500-63: Rods and strips of heat-resistant steels
GOST 1215-59: Malleable iron castings. Technical requirements
GOST 1412-70: Castings from grey cast iron
GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types
GOST 17711-72: Cast copper-zinc alloys (brass)
GOST 2176-67: High-alloy steel castings with special qualities. Grades and technical requirements
GOST 380-71: Common quality carbon steel. Grades
GOST 493-54: Non-tin bronze. Types
GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 613-65: Tin foundry bronzes. Grades
GOST 7832-65: Castings of structural alloy steel. Grades and technical requirements
GOST 8032-56: Preferred numbers and series of preferred numbers
GOST 977-65: Castings made of construction alloy-free steel. Grades and technical requirements
The Document is Referenced By:
GOST 11823-74: Backward lifting valves from gray and malleable iron for Pd up to 2,5 MPa (25 kgf / cm2). Technical requirements
GOST 1233-67: Flanges of fittings, connecting parts and pipelines. Types
GOST 1234-67: Flanges of fittings, connecting parts and pipelines. Connecting dimensions
GOST 12674-73: Tubular shut-off diaphragm brass valves for Freon for Pd 1.6 MPa (16 kgf / cm2 Specification
GOST 17298-71: Actuating device SSI. Final control assembly. Technical requirements
GOST 19740-74: Vertical centrifugal pumps
GOST 3326-69: Reverse gates and valves. End-to-end (face-to-face) dimensions
GOST 5.1553-72: Pulse full height angular steel valve Di 20 mm with electromagnetic drive. Quality requirements for certified products
GOST 5335-75: Safety valves freight lever-iron flange for Pd 1.6 MPa (16 kgf / cm2). Types and basic dimensions
GOST 6127-52: Bath valves. Technical requirements
GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions
GOST 9131-75: Safety valves lever-load flanged cast iron for Pd 1.6 MPa (16 kgf / cm2) and steel for Pd 2,5 MPa (25 kgf / cm2). Technical requirements
GOST 9132-75: Safety valves lever-load, flanged of steel for Pd 2,5 MPa (25 kgf / cm2). Types and basic dimensions
GOST 9218-70: Tank trucks for milk and other food liquids. Types, parameters and technical requirements
GOST 9544-75: Pipeline stop valves. Standards for disc tightness
RD 39-30-731-82: Typical methodology for conducting comparative measurements of the amount of marketable oil by meters and calibrated reservoirs at oil collection points
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
